[Guide] Dogie's Comprehensive Technobit 2HEX4M Setup [HD]

sbogovac

legendary

Activity: 2744

Merit: 1193

I don't believe in denial.

Quote from: Zich on December 26, 2014, 05:11:38 AM

Quote from: sbogovac on December 26, 2014, 05:07:44 AM

Quote from: Zich on December 26, 2014, 04:58:45 AM

Quote from: sbogovac on December 26, 2014, 04:54:17 AM

Would these also work on a RasPi and cgminer-3.6.1 (I used in the past on the HEX16 boards...)?

No, you need to use newer cgminer & apply the latest patch.
Latest patch is for cgminer 4.6.1.

Thanks, for the (super-) quick reply!

And do I need a PSU with 4 separate cables? Or would 2 cables with the integrated splitter (so 4 PCI 6pin connectors, 2 per cable) work too?

You must use 4 separate cables. 2 cables will be very hot.

And... thanks again!!!

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: sbogovac on December 26, 2014, 05:07:44 AM

Quote from: Zich on December 26, 2014, 04:58:45 AM

Quote from: sbogovac on December 26, 2014, 04:54:17 AM

Would these also work on a RasPi and cgminer-3.6.1 (I used in the past on the HEX16 boards...)?

No, you need to use newer cgminer & apply the latest patch.
Latest patch is for cgminer 4.6.1.

Thanks, for the (super-) quick reply!

And do I need a PSU with 4 separate cables? Or would 2 cables with the integrated splitter (so 4 PCI 6pin connectors, 2 per cable) work too?

You must use 4 separate cables. 2 cables will be very hot.

sbogovac

legendary

Activity: 2744

Merit: 1193

I don't believe in denial.

Quote from: Zich on December 26, 2014, 04:58:45 AM

Quote from: sbogovac on December 26, 2014, 04:54:17 AM

Would these also work on a RasPi and cgminer-3.6.1 (I used in the past on the HEX16 boards...)?

No, you need to use newer cgminer & apply the latest patch.
Latest patch is for cgminer 4.6.1.

Thanks, for the (super-) quick reply!

And do I need a PSU with 4 separate cables? Or would 2 cables with the integrated splitter (so 4 PCI 6pin connectors, 2 per cable) work too?

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: sbogovac on December 26, 2014, 04:54:17 AM

Would these also work on a RasPi and cgminer-3.6.1 (I used in the past on the HEX16 boards...)?

No, you need to use newer cgminer & apply the latest patch.
Latest patch is for cgminer 4.6.1.

sbogovac

legendary

Activity: 2744

Merit: 1193

I don't believe in denial.

Would these also work on a RasPi and cgminer-3.6.1 (I used in the past on the HEX16 boards...)?

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: cannachris on December 10, 2014, 07:03:00 AM

Quote from: dogie on December 08, 2014, 08:25:12 PM

Quote from: cannachris on December 08, 2014, 02:58:08 PM

Does anyone have a suggestion for less noisy fans that could be used to replace the sunon fans? And my fans came without a grill Angry

so it sliced off a peice of my finger whilst instaling it, 3 weeks ago now and it still hurts...

Quite honestly I think these are quite overcooled, so any mid range high pressure fans (Corsair I'm looking at you). Might need a small underclock if hash rate goes unstable.

Could you post me a link to a correct model that i could use 'cause I'm a bit new to the miner modding thing... and the miner is not currently at this location so I can't measure anything

It would be these. Its a significant step down in cooling power though so be careful.

cannachris

sr. member

Activity: 406

Merit: 250

cats love crypto | 911 truth @checktheevidence.com

Quote from: dogie on December 08, 2014, 08:25:12 PM

Quote from: cannachris on December 08, 2014, 02:58:08 PM

Does anyone have a suggestion for less noisy fans that could be used to replace the sunon fans? And my fans came without a grill Angry

so it sliced off a peice of my finger whilst instaling it, 3 weeks ago now and it still hurts...

Quite honestly I think these are quite overcooled, so any mid range high pressure fans (Corsair I'm looking at you). Might need a small underclock if hash rate goes unstable.

Could you post me a link to a correct model that i could use 'cause I'm a bit new to the miner modding thing... and the miner is not currently at this location so I can't measure anything

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: cannachris on December 08, 2014, 02:58:08 PM

Does anyone have a suggestion for less noisy fans that could be used to replace the sunon fans? And my fans came without a grill Angry

so it sliced off a peice of my finger whilst instaling it, 3 weeks ago now and it still hurts...

Quite honestly I think these are quite overcooled, so any mid range high pressure fans (Corsair I'm looking at you). Might need a small underclock if hash rate goes unstable.

cannachris

sr. member

Activity: 406

Merit: 250

cats love crypto | 911 truth @checktheevidence.com

Does anyone have a suggestion for less noisy fans that could be used to replace the sunon fans? And my fans came without a grill Angry

so it sliced off a peice of my finger whilst instaling it, 3 weeks ago now and it still hurts...

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: cannachris on December 07, 2014, 04:32:57 PM

Quote from: Zich on December 03, 2014, 08:10:52 PM

Quote from: canemore on December 03, 2014, 02:09:28 PM

right ordered a tp link , but still cant get windows to see it for what it is Undecided

i`m getting a few ghs out of it and a lot of
HEXM 0 CHIP 0,1,2,3 last received nonce 2 secs ago reset
and it see`s
0: HEXM 0 : 1016 805/0802mv 20.12gh ....... this is on cgminer technobit win 0-3-8
i`m using 2 cm750m to power, (but can mod a 2kw server psu)
i`m a bit concerned because its a 2hex4m but i can only see 1 on cgminer screen
anyone got any ideas???
thanks mike

Seem like wrong setting. Can you post your setting?
There is 2 board in there hence you will need 2 usb cable(1 usb cable per board) to connect 2hex4m to HOST.
If using TPLINK TL-MR3020 you will need powered usb hub.

marto just told me to use an unpowered hub for my 8*hex4m in another topic!

There appears to be a bit of draw via USB on these, so I'd put them on a powered hub. Doesn't have to be a beastly one, but a few amps wouldn't hurt.

cannachris

sr. member

Activity: 406

Merit: 250

cats love crypto | 911 truth @checktheevidence.com

Quote from: Zich on December 03, 2014, 08:10:52 PM

Quote from: canemore on December 03, 2014, 02:09:28 PM

right ordered a tp link , but still cant get windows to see it for what it is Undecided

i`m getting a few ghs out of it and a lot of
HEXM 0 CHIP 0,1,2,3 last received nonce 2 secs ago reset
and it see`s
0: HEXM 0 : 1016 805/0802mv 20.12gh ....... this is on cgminer technobit win 0-3-8
i`m using 2 cm750m to power, (but can mod a 2kw server psu)
i`m a bit concerned because its a 2hex4m but i can only see 1 on cgminer screen
anyone got any ideas???
thanks mike

Seem like wrong setting. Can you post your setting?
There is 2 board in there hence you will need 2 usb cable(1 usb cable per board) to connect 2hex4m to HOST.
If using TPLINK TL-MR3020 you will need powered usb hub.

marto just told me to use an unpowered hub for my 8*hex4m in another topic!

canemore

newbie

Activity: 9

Merit: 0

Yes did have wrong settings
Marto74 is a legend for sorting it out for me by remote

I have got to say thanks to all who tinkle and post, I've learnt a lot from you all
so thanks all

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: canemore on December 03, 2014, 02:09:28 PM

right ordered a tp link , but still cant get windows to see it for what it is Undecided

i`m getting a few ghs out of it and a lot of
HEXM 0 CHIP 0,1,2,3 last received nonce 2 secs ago reset
and it see`s
0: HEXM 0 : 1016 805/0802mv 20.12gh ....... this is on cgminer technobit win 0-3-8
i`m using 2 cm750m to power, (but can mod a 2kw server psu)
i`m a bit concerned because its a 2hex4m but i can only see 1 on cgminer screen
anyone got any ideas???
thanks mike

Seem like wrong setting. Can you post your setting?
There is 2 board in there hence you will need 2 usb cable(1 usb cable per board) to connect 2hex4m to HOST.
If using TPLINK TL-MR3020 you will need powered usb hub.

canemore

newbie

Activity: 9

Merit: 0

right ordered a tp link , but still cant get windows to see it for what it is Undecided

i`m getting a few ghs out of it and a lot of
HEXM 0 CHIP 0,1,2,3 last received nonce 2 secs ago reset
and it see`s
0: HEXM 0 : 1016 805/0802mv 20.12gh ....... this is on cgminer technobit win 0-3-8
i`m using 2 cm750m to power, (but can mod a 2kw server psu)
i`m a bit concerned because its a 2hex4m but i can only see 1 on cgminer screen
anyone got any ideas???
thanks mike

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: canemore on December 03, 2014, 04:18:17 AM

Thanks dogie and thanks zich
I'm going to have a play, and get a tp link
hopefully I'll have it sorted soon

is it possible to run the hex4ms and the hex8A1 together?
Cheers Mike

Anytime dude

If you gonna play with TPLINK TL-MR3020, checkout this thread How to upgrade TPLINK TL-MR3020 firmware to technobit openwrt

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: canemore on December 03, 2014, 04:18:17 AM

Thanks dogie and thanks zich
I'm going to have a play, and get a tp link
hopefully I'll have it sorted soon

is it possible to run the hex4ms and the hex8A1 together?
Cheers Mike

Yes, there should be no reason why not.

canemore

newbie

Activity: 9

Merit: 0

Thanks dogie and thanks zich
I'm going to have a play, and get a tp link
hopefully I'll have it sorted soon

is it possible to run the hex4ms and the hex8A1 together?
Cheers Mike

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: canemore on December 02, 2014, 05:17:56 PM

Great guide dogie
I've followed it to the T, but my pc and zadig keeps seeing it as a hex8A1 which I have got 3 running fine. Any ideas that could help a noob?
Cheers Mike

This may cause by "handle usb detect error" setting. You can set it to hex4m and see the behavior.

But if i may suggest, it's better to use TPLINK TL-MR3020 as controller then using PC. Cheap, easy configure, low power consumption.
You can buy it in your local computer store then flash it with technobit firmware.

dogie

legendary

Activity: 1666

Merit: 1185

dogiecoin.com

Quote from: canemore on December 02, 2014, 05:17:56 PM

Great guide dogie
I've followed it to the T, but my pc and zadig keeps seeing it as a hex8A1 which I have got 3 running fine. Any ideas that could help a noob?
Cheers Mike

You'll have to ask Marto unfortunately, I'm not sure what cross interactions there are with multiple devices.

canemore

newbie

Activity: 9

Merit: 0

Great guide dogie
I've followed it to the T, but my pc and zadig keeps seeing it as a hex8A1 which I have got 3 running fine. Any ideas that could help a noob?
Cheers Mike

Topic: [Guide] Dogie's Comprehensive Technobit 2HEX4M Setup [HD] (Read 8169 times)