Topic: [Guide] Notlist3d's Dragon 1.5 Guide and Info (Picture Heavy) (Read 2852 times)
Thank you all turned
tell how much you have on firmware versions on the Dragon 1.5 I have 2014-11-28-02-A1-15T-add-dns2.img and boot.iso others have?
It's been a VERY long time since I made this image. I do not remember IP. I think it's 192.168.1.178 but that could be wrong.
This is the entire firmware backup. You will use software such as Win32DiskImager to write this firmware to a SD card. It is a image file so you use a program such as I mentioned to flash a SD card with the firmware.
I can say carrying this when moving some miners this is by far the heaviest. I wish I would have weighed it. With all the heat sinks it's ridiculously heavy.
tell how much you have on firmware versions on the Dragon 1.5 I have 2014-11-28-02-A1-15T-add-dns2.img and boot.iso others have?
yes need I will be grateful if you give the first version is very necessary
Sure here is the very original firmware - https://www.dropbox.com/s/so2wrtqbqd6jzzs/Dragon1.5boot.rar?dl=0
It is for the 1.5T Dragon, will not work with 1T or 2T.
yes need I will be grateful if you give the first version is very necessary
need the first version of firmware on Dragon 1.5T where you can apply 720 W please share
First version does not have a change of power it's around 1100 W for 1.5T. Is this the firmware you need?
need the first version of firmware on Dragon 1.5T where you can apply 720 W please share
September 10, 2014, 03:38:41 PM
New Higher Resolution pictures including LED indicator: http://s100.photobucket.com/user/notlist3d/library/Dragon15HighRez
(link not embedded because of high resolution)
(link not embedded because of high resolution)
September 08, 2014, 05:08:22 PM
It defintally has the reliability of old dragon's. I can say it made it through a few storms one caused temporary power loss age at my house. It started right back up as soon as power was up
September 06, 2014, 09:04:35 PM
Used on Ghash (no it wont stay there, just testing as i know a lot use it) After a day getting still am able to get 1.50 TH it seems like 1024 diffficulty best from my location at least..
September 05, 2014, 04:44:21 PM
Been switching between pools. Still good 1.5 hashing. One thing to note is you might need to fine tune it depending on your location and pool location. A difficulty of 512 and 1024 seem to be best settings so far depending on pool i use.
September 05, 2014, 12:50:43 PM
Still hashing away slightly over 1.5. Added the firmware download to 2nd post.
September 04, 2014, 03:31:20 PM
About 20 hours in and 1.52 is average pool rate. Looking good at maintaining considering how hot of a day it is and I'm not using a lot of cooling on it.
September 03, 2014, 11:31:37 PM
Quote
B)After the miner has booted up you will need to go to the IP written on the miner’s front side. Its 192.168.1.XXXX
there is no screen on this 1.5T right?
Correct the 1.5 T has 3 fan's in front, no LCD and 2 fan's like the model of 1T i have is. It does have LED indicators on top of miner with different colors I have not had the time to try to decode all of them yet.
September 03, 2014, 11:25:15 PM
Quote
B)After the miner has booted up you will need to go to the IP written on the miner’s front side. Its 192.168.1.XXXX
there is no screen on this 1.5T right?
September 03, 2014, 11:16:03 PM
Again i feel false advertising at group buy again. As per my question what is initial psu? Answer was 1200w but now with the picture above, we can all see very clearly that it is only using a 1100w psu & the normal power consumption is already 1070w, not much margin. Pcie cables are flexi ones but looks weak & have a high chance of melting. Heatsinks do get hot or even very hot ! Cabling is a mess.
I feel like your looking for something wrong. So far I have used stock PSU and have had no problems. I can only say from my experience. Hashing away at a little over 1.5 and yes I will get temps, but it is cooler air coming out of it then my 1T by a good amount it feels. (Again i realize i need to get temperatures to show that that a feeling is not strong evidence).
EDIT: My old 1T dragon is in a room with air-condition running very low it has blades of 100 mostly and up to 107 degrees F. The second room is about about 10 degrees or so hotter with my 1.5 T dragon and I still am getting low 90 degree temperatures. This is using a infrared thermometer and getting temps off the blades. And less heat obviously with air around miner.
September 03, 2014, 10:56:32 PM
Again i feel false advertising at group buy again. As per my question what is initial psu? Answer was 1200w but now with the picture above, we can all see very clearly that it is only using a 1100w psu & the normal power consumption is already 1070w, not much margin. Pcie cables are flexi ones but looks weak & have a high chance of melting. Heatsinks do get hot or even very hot ! Cabling is a mess.
September 03, 2014, 10:16:01 PM
What about overclocking of this unit?
It add's a extra fan compared to some 1T's and what seems to be larger heat sinks. It might have some overclocking to it, the heat feels like less out the back of it (i will try to get some temps sometime). But i don't think it would be good to add much of a higher frequency to it.
I think you are better off with electricity savings and not overclock these, as the firmware does not make it a official option. I personally won't be overclocking.
September 03, 2014, 10:02:00 PM
Doubt it. Each blade is 250 GH/s and the chips are already over clocked as much as will allow.
September 03, 2014, 09:54:53 PM
What about overclocking of this unit?
Jump to: