[GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 10.

Larvitar

jr. member

Activity: 196

Merit: 1

Quote from: Branko on June 11, 2018, 02:16:00 PM

Quote from: Mattthev on June 11, 2018, 01:56:56 PM

Quote from: Branko on June 11, 2018, 02:12:53 AM

Anyone found solution for incompatibility between ati flasher and latest win 10
version 1803 update? (other than not updating windows Grin

)

Yeah, roll back the update Grin

My guess is that Microsoft made it harder for programs to directly communicate with hardware,
which is usually desirable against malware, but in this case they broke legit app too

lets hope ATI sort it out soon (although it wouldn't surprise me if this was intentional, similar
how Nvidia doesn't allow easy flashing)

Hi branko, RX560 mage!

Techpowerup published Atiflash 2.84 fixing compatibility with Windows crap 1803. See here: https://www.techpowerup.com/download/ati-atiflash/

I flashed a bios yesterday and works!

(still with same interface, showing only 3 GPUs, whatever)

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: igotek on June 13, 2018, 05:27:56 PM

Quote from: illanz on June 04, 2018, 03:30:47 PM

Hi
I have just purchased PBE 2.2

please what is the difference in PBE between [powersave] and [OC and undervolting] options ?

Thanks !

I read all the pages after this post and didnt find the answer. It will be really good to know the difference.

This is not support thread for PBE or any bios bought on shop, use [email protected]
Difference is in applied voltages and clocks, powersave applies lower voltages and clocks.
For best performance you need to fine tune the GPUs, check in HWinfo for memory errors when OC. It depends also what miner you use it might need config too.

Larvitar

jr. member

Activity: 196

Merit: 1

Quote from: Branko on June 11, 2018, 02:12:53 AM

Anyone found solution for incompatibility between ati flasher and latest win 10
version 1803 update? (other than not updating windows Grin

)

I found yesterday

Run cmd without privileges, and flash using Atiflash executable (DOS version)

igotek

hero member

Activity: 2170

Merit: 612

Online Security & Investment Corporation

Quote from: illanz on June 04, 2018, 03:30:47 PM

Hi
I have just purchased PBE 2.2

please what is the difference in PBE between [powersave] and [OC and undervolting] options ?

Thanks !

I read all the pages after this post and didnt find the answer. It will be really good to know the difference.

igotek

hero member

Activity: 2170

Merit: 612

Online Security & Investment Corporation

My GPU is Sapphire Nitro Radeon RX470 4GB. I saved the original bios by using ATIflash.
Elpida Hynix

IMAGE:

I have bought bios at 5 USD from your web site.
I see ERROR ROM ERASE warning when i try to flash your bios file to my GPU by using ATIflash.
I thought the bios file is not for my GPU. So I decided to buy your modifed PBE software.

***

I have bought license at 55 USD for PBE 2.2 from your web site.
I open the original bios in your PBE.
I selected OC and undervolting & XMR and clicked one time click patching button.
I saved the edited bios and flash it to the GPU by using ATIflash.

***

Core 1236
Memory 1900

SRBMiner - cryptonight-v7
config: intensity 38.5, worksize, double threads (the best setting i get the best hashrate.)

I see only 710 h/s
What am I missing in the settings or configs ?
I want to get the real hashrate like other miners. (Many people reports they get 850 - 950 h/s.)

***

I tried to change memory by watching the HWinfo software for GPU memory errors
I went up to 2100 MHZ memory without any GPU memory errors and nothing better hashrate. I dont understand why there is no any effect on the hashrate.

Could you advise me what should I do ?

EDIT: I see 818 h/s now thanks to Mattthev's advise on the a few previous page.

What I did ?

-install latest Adrenalin drivers.
-switch compute settings.

***

Still there is nothing change in hashrate when i set higher memory...

Larvitar

jr. member

Activity: 196

Merit: 1

Quote from: heavyarms1912 on May 01, 2018, 08:33:13 AM

Quote from: alizali on May 01, 2018, 07:55:12 AM

is there any different in timing strap for Ethash vs cryptonight V7?
i mean if we have best timing in the ethash will it be the best timing for cryptonight v7?

Fine tuned timings can lead to better results in one over the other.

ultraheavyarmswithlasers2048, what timings usually lead to improve CN hashrate? Just RASMAC? tRFC is rellevant?

Sorry if it's your personal work, but I really having trouble to fine the ETH BIOSes to CN.

sedde

newbie

Activity: 43

Merit: 0

Matt ,

Can you explain what the Powersaving and what the OC and UV tabs do on your 2.2 ?

I only have sapphire nitros, 570s and 580s 8gb all of them.

Also the micron straps on your program, might make the microns run fast, but you cannot reboot the rigs, they crash, i need to use old pbe 1.6.7 straps to make them work correctly.

I use SMOS only, no windows.

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Hello.

I would like to try the compute mode on my rx570 8GB msi armor
they are bios modded, do I have to put the original bios on before using the compute mode or I can do it also with the bios modded?

Branko

sr. member

Activity: 2674

Merit: 328

Quote from: Mattthev on June 11, 2018, 01:56:56 PM

Quote from: Branko on June 11, 2018, 02:12:53 AM

Anyone found solution for incompatibility between ati flasher and latest win 10
version 1803 update? (other than not updating windows Grin

)

Yeah, roll back the update Grin

My guess is that Microsoft made it harder for programs to directly communicate with hardware,
which is usually desirable against malware, but in this case they broke legit app too

lets hope ATI sort it out soon (although it wouldn't surprise me if this was intentional, similar
how Nvidia doesn't allow easy flashing)

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: Branko on June 11, 2018, 02:12:53 AM

Anyone found solution for incompatibility between ati flasher and latest win 10
version 1803 update? (other than not updating windows Grin

)

Yeah, roll back the update Grin

Quote from: fishfishfish313 on June 10, 2018, 06:14:56 PM

Hey man, thanks a ton for putting together. I am learning mining. I am using: ASUS Radeon RX 580 O4G Dual-fan OC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card (DUAL-RX580-O4G)

https://www.amazon.com/gp/product/B071CMPRZZ/

I see you have the 8gb bios version of a few ASUS cards on your website? . . would any of them work with the 4gb cards that I have?

https://mining-bios.eu/product-category/rx-580/asus-rx-580/

Oh, and merited

I bookmarked this page. I'll be frequenting it a lot Cool

Hi, thanks. Best to check with SRB Polaris to be sure it's the same. Names of the bios aren't always right, mostly OC and non OC version might be wrong named. But I see listed only 8GB bios for all of them so it won't work for you. If you plan to buy the 5 bucks bios you can pretty much do it with this tutorial or any other that uses performance timings or if you want a better timings buy PBE 2.2.

Branko

sr. member

Activity: 2674

Merit: 328

Anyone found solution for incompatibility between ati flasher and latest win 10
version 1803 update? (other than not updating windows Grin

)

jmigdlc99

sr. member

Activity: 784

Merit: 282

Quote from: stef_stef on June 05, 2018, 03:46:36 PM

Anyone to share a 470 mining edition (Saphire) 4gb samsung Bios and settings?

You can either use the Polaris one-click timing patch feature or you can download an original/stock rx470 Samsung bios and edit it manually. It's pretty easy as there are already numerous tutorials out there that teach you how to do it step-by-step.

Here is a link to a PBE one-click patch tutorial: https://forum.getpimp.org/topic/1530/bios-modding-with-polarisbioseditor-one-click-timing-patch-on-windows
Good luck.

fishfishfish313

sr. member

Activity: 546

Merit: 252

Hey man, thanks a ton for putting together. I am learning mining. I am using: ASUS Radeon RX 580 O4G Dual-fan OC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card (DUAL-RX580-O4G)

https://www.amazon.com/gp/product/B071CMPRZZ/

I see you have the 8gb bios version of a few ASUS cards on your website? . . would any of them work with the 4gb cards that I have?

https://mining-bios.eu/product-category/rx-580/asus-rx-580/

Oh, and merited

I bookmarked this page. I'll be frequenting it a lot Cool

stef_stef

full member

Activity: 144

Merit: 100

Anyone to share a 470 mining edition (Saphire) 4gb samsung Bios and settings?

Thanks

illanz

newbie

Activity: 40

Merit: 0

Hi
I have just purchased PBE 2.2
I use ETHOS only
please what is the difference in PBE between [powersave] and [OC and undervolting] options ?

Thanks !

stef_stef

full member

Activity: 144

Merit: 100

Quote from: Mattthev on May 21, 2018, 11:29:19 AM

Quote from: RigMaster on May 21, 2018, 10:45:41 AM

I've just build my second rig using 8x RX 470 (Samsung) and stock hashrate was like 21Mhs. After using the paid polaris 2.2 (thank you Mattthev) the hashrate increase slightly like 1-2Mhs. Then I adjust clocks (Core 1050 / Mem 1900) and I am getting 27.1Mhs.

If i try to adjust the memory higher like 1950+ the system will crash and restart miner many times, it's not stable. If i adjust mem to like 2000+ I get invalid shares.

Are you still achieving 30+ Mhs on the RX 470 (Samsung) cards?
I downloaded original bios, loaded into the paid Polaris Bios Editor 2.2, patched for power saving OC and applied... saved and loaded the mod bios.

Did I miss something?

Is it mining card? Samsung type ending FE or FC? Write me to my e-mail. You need the other Uber-mix not the 3.1.1. Also don't forget use the latest Adrenaline drivers and switch to compute workload.

Are the adrenaline drivers the best ones atm? I am running the blockchain ones. Should I switch?

Also, what i compute workload?

Thanks!

Call_Me_Bambi

sr. member

Activity: 574

Merit: 261

Quote from: big_daddy on May 24, 2018, 06:33:30 AM

For a rig with 8 msi 570 8gb armor, micron mem, do I have to bios mod the gpus &use blockchain drivers or I can get better results with the lasts drivers and compute mode
Could I get around 1khs per card or not?

Interested the most in the cryptonite havy or v7 algo

If you want the best hashrate you will have to modify your GPU BIOS, there's no getting round that, if you don't mod the BIOS you will get s**t hashrates. Some people swear by the AMD Blockchain drivers and some say it makes no difference - try it yourself it's quick to do.
When you mod the BIOS do not forget to make a backup first; I name the backups by the serial number of the card so I know which is which if I need to restore them.

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

For a rig with 8 msi 570 8gb armor, micron mem, do I have to bios mod the gpus &use blockchain drivers or I can get better results with the lasts drivers and compute mode
Could I get around 1khs per card or not?

Interested the most in the cryptonite havy or v7 algo

20y74e1

newbie

Activity: 9

Merit: 0

There is a group for AMD mode help. Paid support open for yada-like swap offers

https://chat.whatsapp.com/EvvHv4rBeG70YWSmEQXhFx

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: RigMaster on May 21, 2018, 10:45:41 AM

I've just build my second rig using 8x RX 470 (Samsung) and stock hashrate was like 21Mhs. After using the paid polaris 2.2 (thank you Mattthev) the hashrate increase slightly like 1-2Mhs. Then I adjust clocks (Core 1050 / Mem 1900) and I am getting 27.1Mhs.

If i try to adjust the memory higher like 1950+ the system will crash and restart miner many times, it's not stable. If i adjust mem to like 2000+ I get invalid shares.

Are you still achieving 30+ Mhs on the RX 470 (Samsung) cards?
I downloaded original bios, loaded into the paid Polaris Bios Editor 2.2, patched for power saving OC and applied... saved and loaded the mod bios.

Did I miss something?

Is it mining card? Samsung type ending FE or FC? Write me to my e-mail. You need the other Uber-mix not the 3.1.1. Also don't forget use the latest Adrenaline drivers and switch to compute workload.

Topic: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 10. (Read 221013 times)