Pages:
Author

Topic: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 12. (Read 220957 times)

sr. member
Activity: 966
Merit: 359
👉MINING-BIOS.eu💲⛏
Hm, the tool is doing everything described in your guide, but in automated way. The only thing that you will need is the original GPU bios. More over you don't need a Windows machine to patch your bios, so it is perfect for Linux or Mac OS users.
It does not! It does mem shifting! The worst way you can mod the bios. You can run exe on Linux and Mac... BTW PBE 1.6.7 can be compiled for Linux very easily.
newbie
Activity: 4
Merit: 0
Hi,

i bought a Asus rog strix rx470  (hynix rom) on mathews web site, and its works fine,    

but there is no for Rx470 (elpida)  for same card?  

do any one have  these rom ? i  can pay for it, can you help me for this issue



note: anorach rom gives,  gpu fault detected 147 error

Save your original bios with atiflash and upload it into bios.rigswitch.com to get a modified bios. Just play a bit with memory and core clock settings

For start you can use these settings:
Strap timings: 1500
Core clock: 1150 MHz
Mem clock: 2050 MHz

Note: you don’t have to set voltage, it will use the default values
What a sh*t tool at least use SRBPolaris for memshifting... PBE 1.6.7 and my guide are much better options, PBE 2.2 is the best shot from these but paid.

Hm, the tool is doing everything described in your guide, but in automated way. The only thing that you will need is the original GPU bios. More over you don't need a Windows machine to patch your bios, so it is perfect for Linux or Mac OS users.
sr. member
Activity: 966
Merit: 359
👉MINING-BIOS.eu💲⛏
Hi,

i bought a Asus rog strix rx470  (hynix rom) on mathews web site, and its works fine,    

but there is no for Rx470 (elpida)  for same card?  

do any one have  these rom ? i  can pay for it, can you help me for this issue



note: anorach rom gives,  gpu fault detected 147 error

Save your original bios with atiflash and upload it into bios.rigswitch.com to get a modified bios. Just play a bit with memory and core clock settings

For start you can use these settings:
Strap timings: 1500
Core clock: 1150 MHz
Mem clock: 2050 MHz

Note: you don’t have to set voltage, it will use the default values
What a sh*t tool at least use SRBPolaris for memshifting... PBE 1.6.7 and my guide are much better options, PBE 2.2 is the best shot from these but paid.
newbie
Activity: 4
Merit: 0
Hi,

i bought a Asus rog strix rx470  (hynix rom) on mathews web site, and its works fine,    

but there is no for Rx470 (elpida)  for same card?  

do any one have  these rom ? i  can pay for it, can you help me for this issue



note: anorach rom gives,  gpu fault detected 147 error

Save your original bios with atiflash and upload it into bios.rigswitch.com to get a modified bios. Just play a bit with memory and core clock settings

For start you can use these settings:
Strap timings: 1500
Core clock: 1150 MHz
Mem clock: 2050 MHz

Note: you don’t have to set voltage, it will use the default values
hero member
Activity: 1078
Merit: 696
Hi,

i bought a Asus rog strix rx470  (hynix rom) on mathews web site, and its works fine,    

but there is no for Rx470 (elpida)  for same card?  

do any one have  these rom ? i  can pay for it, can you help me for this issue



note: anorach rom gives,  gpu fault detected 147 error
newbie
Activity: 10
Merit: 0
Can someone PLEASE share modded bios for

XFX RX480 GTR 8GB (samsung)

I cant get it working... my best result is ~28mh/s on ETH and when I try to overclock the memory over 2000, system crashes.  Undecided

Please HELP!
member
Activity: 198
Merit: 10
I have a 570 8gb nitro + card. After bios moding how much energy must consume ? I calculate 150-160 watts.
newbie
Activity: 2
Merit: 0
Did anyone get his 6xRX580 mining rig under 850 Watts from the wall using SMOS ?

I am struggling. people tried to help, but it seems i cant get gpu vddc below 950mv , and per card its pulling about 150 watts.  Is this still the problem using Linux/SMOS ? 

3x sapphire nitro+    8 gb  Micron
1x sapphire nitro+    8 gb  Hynix
2x Gigabyte Gaming 4 gb  Samsing

Note that i only tried to change the mV value of the GPU en MEMORY using polaris master, i've set them to 850 , but still it seems it wont go lower that 950.   Have not tried power play or something like that.

Could that be the thing why it wont go lower? Or is this just still the problem of Linux and SMOS?
member
Activity: 476
Merit: 19
I am looking for a bios for an rx 550 2gb "baffin" for cryptonight.

I tried to modify it, "pimp" the strap Smiley, unlocked the shaders but I saw people able to use it at higher speed and less power than what I did and I'm curios

its not available to purchase anywhere so I'm asking here
member
Activity: 239
Merit: 10
I have a Gigabyte RX 580 8G Gaming card and I've tried everything that you have suggested in your FAQ after using PBE 2.2. I'm using Claymore to mine ETH. While I am mining I start MSI Afterburner and all of the settings at the default settings are Core Voltage 0, Power Limit 0, Temp Limit 90, Core Clock 1340, Memory Clock 2000, Fan speed 47, Voltage 1106 mV and Temp is 74. The GPU power draw is 121.4 watts. I'm only getting1 extra Mh/s (around 25.7 instead of stock bios of 24.6 Mh/s). Can you please help me figure out how to increase the hash rate to 29-30 that I am reading about when modding the Bios. I do appreciate your help in this matter.


Start with the options that will give you lower power consumption.
1. Power Limit -20
2. CC - 1200
3. Do not set fan to fixed, set target temp to 55
4. Set Cvoltage to 950

When you'll get your card in range lower then 60 you can try to find your sweet spot in performance by doing small changes, like lowering voltages by 25 step.

Hope it'll help to start your quest for ultimate performance.
newbie
Activity: 7
Merit: 0
I have a Gigabyte RX 580 8G Gaming card and I've tried everything that you have suggested in your FAQ after using PBE 2.2. I'm using Claymore to mine ETH. While I am mining I start MSI Afterburner and all of the settings at the default settings are Core Voltage 0, Power Limit 0, Temp Limit 90, Core Clock 1340, Memory Clock 2000, Fan speed 47, Voltage 1106 mV and Temp is 74. The GPU power draw is 121.4 watts. I'm only getting1 extra Mh/s (around 25.7 instead of stock bios of 24.6 Mh/s). Can you please help me figure out how to increase the hash rate to 29-30 that I am reading about when modding the Bios. I do appreciate your help in this matter.
newbie
Activity: 18
Merit: 0
sr. member
Activity: 966
Merit: 359
👉MINING-BIOS.eu💲⛏
@dev
I cannot find on Your web the bios for the RX MSI 570 8GB, V341-236R, (Armor)
any hints?
There aren't all bios there. You can use this guide and mod it or buy PBE 2.2 there.
hero member
Activity: 1680
Merit: 583
xUSD - The PRIVATE stable coin - Haven Protocol
@dev
I cannot find on Your web the bios for the RX MSI 570 8GB, V341-236R, (Armor)
any hints?
full member
Activity: 181
Merit: 101
Ethereum Miner
Hello I have a 570 8gb nitro+ with micron memory. I want to know if the bios in the card is the original one. I mine with 25 now. And the best bios to use to go up to 30-31...! Thanks.

Use PBE one-click thingy then flash your modded bios - guaranteed >30Mh for Rx580.
member
Activity: 198
Merit: 10
Hello I have a 570 8gb nitro+ with micron memory. I want to know if the bios in the card is the original one. I mine with 25 now. And the best bios to use to go up to 30-31...! Thanks.
sr. member
Activity: 574
Merit: 261
I was wondering since im selling one of my cards.

If my card was bios modded and i revert it to stock, will the other person need to run pixel patcher or anything.

How do i approach this?Kinda worried they might think i sold them a bricked card if something goes wrong.

If you restore the original BIOS there will be no need to run pixelpatcher, you can test it by installing original video drivers that will not work with a modded card, then flash the original BIOS and run again. If the card now works in its full resolution (or whatever your monitor can manage) then it's successfully restored to it's original condition.

I have sold cards that I had modded the BIOS on them and before selling I restored the original BIOS and have had no complaints.
newbie
Activity: 1
Merit: 0
I was wondering since im selling one of my cards.

If my card was bios modded and i revert it to stock, will the other person need to run pixel patcher or anything.

How do i approach this?Kinda worried they might think i sold them a bricked card if something goes wrong.
sr. member
Activity: 2632
Merit: 328
Hello, what is the best bios mod for RX580 8GB V1?
please give me some advice, thank you

The best is the one that gives you the best hashrate with least power spent
Pages:
Jump to: