Topic: [GUIDE][TUTORIAL][XMR,ETH]How To Mod Bios RX470/570/480/580 VEGA Mining 💰⛏ - page 20. (Read 221013 times)

Of course it can't compared to custom job... it's mostly for miners that don't want to mod bios by itself anyway. I think I've point many times to this thread to anybody can do it for free and have about the same results like 5 USD bios.
VBIOS P/N is not shown, because I believe that "Type" from SRBPolaris is enough to recognize the specific GPU together with memory types or am I wrong?

What drivers? Are you using compute workload?

Too high memory clocks...

WattTool is not working since 17.7.2 drivers... You haven't wrote if you switch cards to compute workload and the BETA drivers from Robinhood aren't definitly good with latest Windows 10, you should at least use those official Blockchain drivers or better 17.11.4, you may also try latest Adrenaline, but on both of them you have switch cards to compute workload and use Overdriventool not WattTool...

This is interesting to know, I thought that the Robin Hood drivers were created before the official blockchain drivers to overcome some problem with the DAG and that this was fixed in the official blockchain drivers, and subsequent driver releases.

Hi, how many MH/s spect if i buy the pro mod for elpidia rx580 sapphire

Hi all,

I am building a small rig which currently has 2 570 and 1 1060. I face an issue with the 570 ones which I suspect that has to do with the lack of connection to a monitor.

The first gpu is a 570 (Elpida) and when I connect using teamvier (or connect a monitor) everything seems fine as I do get a 28 mh/s after having modified the bios. If I do disconnect from teamvier then automatically the hashrate drops to 24 mh/s. The 1060 is not affected by teamvier or the monitor.

Today  I installed a second 570 (hynix) which is the second gpu (stock 19) following exactly the same steps (same drivers, same patch on drivers and then a new bios. In fact I tried two bios one with 1950 and one with 2200 on the memory but there was no difference. I get always 24mh/s and i suspect that it has to do with the lack of monitor ( I suppose the teamviewer only uses the first 570).

I know there are some dummy dvi plugs which I will try. Is there any other reason that I may have this big difference between the two 570 and how can I solve the issue?

ps: In all videos in youtube I see rigs without any dummy plug.

Hi
at this moment i use 4 rx580 nitro+ 8Gb (Micron)
with bios RX580MicronModded_Undervolt_v1 and driver Beta for [Suspicious link removed]pute on windows 10 64b
I mine with claymore V10 with
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal wallet.MainRig -epsw x -esm 0 -estale 0 -asm 1 -dcri 9 -cclock 1250 -cvddc 950 -mclock 2250 -mvddc 950 -tstop 85 -tt 65 -fanmin 25 -fanmax 100
But my system is instable.

I would like to test this bios mod:
https://mining-bios.eu/product/mining-bios-sapphire-rx-580-nitro-8gb-special-edition-micron-performance-timings/?currency=EUR
with driver Beta for [Suspicious link removed]pute
What is the best for my cards or what do you think about this ?
TY

hi! noob here, and not the best in english haha, im having problems with a asus strix rx470 hynix memory, i can get the memory more than 1840mhz stock, and with the new bios using straps from here i even cant get the miner start at 1800mhz because i have millions of memory errors. Copying the straps from 1650 to 2000 it works more or less stable at 1845mhz (1090 core and 956mv) but is doing only 22.40 mh/s (stock 20) and some times you can see in afterburner that the core clocks and voltage start to change and everything start to be unstable

what im doing wrong? why stock is working so bad?

againg, sorry for my "english"

thanks!
 
edit:
im using windows 10 64 bits
blockchain drivers
another gtx 1060 and 1070 in the same system with not problems at all

im missing something?

Yesterday  after GPU clock adjust again  and mining in Claymore increment the rate to 19mH/s, today I will upgrade to Windows 10 and try to follow the guide steps.

thanks for answer.

Is Serial Number in the bios file of Rx or Vega gpu. or are all exact model = exact bios?

Firstly don't use Minergate! Claymore or at least his kernel is best for ETH from publicly available...
The rest like BSAlex said I've already explained in the guide...

Hi, i bought a powercolor RX 480 8GB (reference model), it has samsung memory luckily. I put the same straps that i have on my Sapphire nitro+ rx480 8gb (samsung too), and reboot.
The straps are:
777000000000000022CC1C00CEE55C46C0590E1532CD66090060070014051420FA8900A00300000 012123442C3353C19

When i start mining after the pc is turned on the powercolor start getting millons of memory errors and after 10seconds i get a black screen(for 1 sec) and after that wattman settings are restored to default (It was on default settings before). Now i open the miner again and i get 0 errors and is hashing at 31.8MHs (overclocked), but every time i reboot the pc it happens the same, it's very weird.

So i set another straps that get me 1.2MHs less but it doesnt happen that weird thing the first time i open the miner.

Also i tried restarting wattman settings before start mining after a reboot but it's exactly the same.

Someone have any idea what is happening?

Thanks in advance!

Switch to Win10 and read first page of the thread for the rest. GPU Tweak is not recommended BTW.

Hi, I am a beginner here and as miner, yesterday I put the first GPU and I chose  Strix Radeon RX 570  4gb.

CPU  I3
Windows 7 pro 64bit  without any upgrade need to do today.

yesterday installed  driver and OC sofware called GPU Tweak II and began to play moving clocks to  gpu 1200  and 1850 memory.

after install Minergate to check   with ETH  I have  only 12 mh/s    my son  in his gaming computer with amd fx9590  and gpu gtx 1060 6gb  have in Minergate 23 mh/s without OC or any bios change.

I am sure that I have more than one mistake,  where to begin?  

workload mode   ( how to do )
check gpu error  ( how to check )
blockchain bios     ( is ok  this  Radeon Software Crimson ReLive Edition Beta for [Suspicious link removed]pute Driver for Windows® 7 64/32 bit​ )
OC   1100/2000 -0.2v     ( ok  with  GPU Tweak II )

ETH bios mod    ( how to do )

this is the beginner mode  

Yeah some of Elpidas can't have higher memory clocks. You might also need to tweak miner config and switch to compute workload.
In the Monero guide guys posted some of the best configs, you have to use 2 threads for best performance.

I'll suggest trying lower GPU frequency to 1250, maybe it'll allow higher MEM. For me it work at 2150 both for Elpida and Hynix mem and results in 940 H/s for Hynix (just shoot a test, running ETH 30 MH/s mostly)

Hello miners!
I recently got my first video card, a  Radeon Sapphire RX 570 pulse 4GB. It's the fist time I'm modding a bios and I could use some help to optimise my card. I decided to mine Monero, and the only thig I know about mining is from Mattthev's tutorials about Monero mining and bios modding.
GPU-Z shows Elpida memory, and I modified the timings in SRBPolaris only for Micon-Elpida (the card has also SK Hynix memory). First i tried the timing recommended by Eliovp and Mattthev and after that I used a timing optimised by laik2, that Eliovp said is more stable. I c/p it to 1500, 1625, 1750 and 2000.
The timings are:
777000000000000022AA1C00315A5436A0550F15B68C1506004082007C041420CA8980A9020004C 01712262B612B3715
777000000000000022339D00CE515A398055111230CB440900408400740114206A8900A00200312 0150F292F94273116   -   optimised
The other modifications I made are:
- GPU frequency from 1284 to 1300 MHz
- MEM frequency from 1750 to 1900 MHz (more gave me memory errors)
- Voltages from 1000 down to 950 Mv
I am using Win 10 with blockchain drivers.
After modding I have a constant 780H/s in XMR-STAK-AMD 1.4.0 Official release, with few memory errors.
Can I get more H/s from my card? If so, can you please help me with some sugestions? Power consumption is not an issue. I want maximum performance!
Thank you!

Yeah it was made for new miners and modders

I would have to check it, check the GPU type if it's same it will fit. Use SRB best for comparing.
I have no idea what is T8G model... If the bios won't be the one you can take other one for free (If it's not listed I will mod it and add there, but I'm kinda busy, too much bios requests so it will be in a week.)
Yes, the PBE is updated, currently it's 2.0.2 version, you can always log in and download the latest version once you bought it.

I’ve built an 8-card rig out of these Armor 570s and got 5 hynix 3 samsung. The samsung does 29.5 and the hynix does 29 at 2020 memory clock.

Pulls 1050w at full tilt at the wall.