Ethash DAG epoch RX470/480/570/580 FIX !!

babnero

newbie

Activity: 7

Merit: 1

Quote from: sxemini on September 28, 2021, 05:14:56 AM

Quote from: babnero on September 28, 2021, 01:40:01 AM

Quote from: adaseb on September 27, 2021, 11:07:26 PM

I am confused you said it works on Win7 but not Win10 or do you mean other way around. If you want 30mhs with your RX 580 8gb you need to make sure you did the bios mod with the memory straps.

Then you need to install AMD drivers 16 or 17. After they are installed you use Robinhood drivers in device manager update driver option. Then when windows boots you will get that error and that is when you need the pixel patcher and it should work after that.

Make sure your clocks are correct, memory needs to be at least >1900mhz or higher. Core clock like 1100 or so. And you should get at least >25mhs.

the rx 580 8gb did not work for me on windows 10 i get error 43 i even bio mod it and also pixel patcher it but i sill get the error, even on windows 7 i get error 43 but after i pixel patcher it then the errors goes away. as you suggest i will try the AMD drivers 16 and see. thanks so much for helping

And you must enable compute mode also to get the full speed for the rx570. Error 43 is pixelclockpatcher, you use it wrong i think. Use DDU to uninsall all driver, reboot, install newer driver 20.9.1 or something newer, use pixelclockpatcher -> reboot. Don´t use robinhood driver, i think it cannot handle this specific version of your rx580.

ok i will try again. t even try and amd drives 16 and 17 and i get this Error 182 – Radeon™ Software Install Detected AMD Graphics Hardware in Your System Configuration That Is Not Supported With This Software Installation. so now let me install windows 10 again and try the pixelclockpatcher

sxemini

member

Activity: 1558

Merit: 69

Quote from: babnero on September 28, 2021, 01:40:01 AM

Quote from: adaseb on September 27, 2021, 11:07:26 PM

I am confused you said it works on Win7 but not Win10 or do you mean other way around. If you want 30mhs with your RX 580 8gb you need to make sure you did the bios mod with the memory straps.

Then you need to install AMD drivers 16 or 17. After they are installed you use Robinhood drivers in device manager update driver option. Then when windows boots you will get that error and that is when you need the pixel patcher and it should work after that.

Make sure your clocks are correct, memory needs to be at least >1900mhz or higher. Core clock like 1100 or so. And you should get at least >25mhs.

the rx 580 8gb did not work for me on windows 10 i get error 43 i even bio mod it and also pixel patcher it but i sill get the error, even on windows 7 i get error 43 but after i pixel patcher it then the errors goes away. as you suggest i will try the AMD drivers 16 and see. thanks so much for helping

And you must enable compute mode also to get the full speed for the rx570. Error 43 is pixelclockpatcher, you use it wrong i think. Use DDU to uninsall all driver, reboot, install newer driver 20.9.1 or something newer, use pixelclockpatcher -> reboot. Don´t use robinhood driver, i think it cannot handle this specific version of your rx580.

babnero

newbie

Activity: 7

Merit: 1

Quote from: adaseb on September 27, 2021, 11:07:26 PM

I am confused you said it works on Win7 but not Win10 or do you mean other way around. If you want 30mhs with your RX 580 8gb you need to make sure you did the bios mod with the memory straps.

Then you need to install AMD drivers 16 or 17. After they are installed you use Robinhood drivers in device manager update driver option. Then when windows boots you will get that error and that is when you need the pixel patcher and it should work after that.

Make sure your clocks are correct, memory needs to be at least >1900mhz or higher. Core clock like 1100 or so. And you should get at least >25mhs.

the rx 580 8gb did not work for me on windows 10 i get error 43 i even bio mod it and also pixel patcher it but i sill get the error, even on windows 7 i get error 43 but after i pixel patcher it then the errors goes away. as you suggest i will try the AMD drivers 16 and see. thanks so much for helping

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

I am confused you said it works on Win7 but not Win10 or do you mean other way around. If you want 30mhs with your RX 580 8gb you need to make sure you did the bios mod with the memory straps.

Then you need to install AMD drivers 16 or 17. After they are installed you use Robinhood drivers in device manager update driver option. Then when windows boots you will get that error and that is when you need the pixel patcher and it should work after that.

Make sure your clocks are correct, memory needs to be at least >1900mhz or higher. Core clock like 1100 or so. And you should get at least >25mhs.

babnero

newbie

Activity: 7

Merit: 1

Quote from: FP91G on September 22, 2021, 09:39:38 AM

Quote from: babnero on September 21, 2021, 02:44:58 AM

Yes I did but it only worked in windows 7 after I get the error but didn't work on windows 10

Quote from: DrX on September 21, 2021, 02:25:44 AM

Quote from: babnero on September 20, 2021, 12:07:25 PM

I did install hiveos but only the rx 580 shows up I also have gigabyte gtx 1070ti which didn't shows up in hiveos even nicehash other nvidia card works very well on windows 7 about three nvidia but the rx 580 8gb didn't even on windows 10 I get error 43

RX580 bios modded? did you run AMD/ATI Pixel Clock Patcher? (By ToastyX from monitortests.com)

Some miracles happen to you. In one operating system, the video card is detected and in the other not. I have rarely seen this. Check the power supply, raiser and write your hardware configuration, because it is very difficult to be psychic.
For an AMD video card, you need to install drivers that will be newer than May 2020, because the problem of a 4 GB dag file is solved there.

yes the miracle happens on windows 7 64bit after i follow this guide https://www.techinferno.com/index.php?/topic/5874-guide-dsdt-override-to-fix-error-12/ all graphics card works without any errors but only rx 580 that mine at 8.68 MH/s i have the latest drivers install and am using dell studio 1537 intelcore2 dua CPU T6400

FP91G

legendary

Activity: 1820

Merit: 1121

Quote from: babnero on September 21, 2021, 02:44:58 AM

Yes I did but it only worked in windows 7 after I get the error but didn't work on windows 10

Quote from: DrX on September 21, 2021, 02:25:44 AM

Quote from: babnero on September 20, 2021, 12:07:25 PM

I did install hiveos but only the rx 580 shows up I also have gigabyte gtx 1070ti which didn't shows up in hiveos even nicehash other nvidia card works very well on windows 7 about three nvidia but the rx 580 8gb didn't even on windows 10 I get error 43

RX580 bios modded? did you run AMD/ATI Pixel Clock Patcher? (By ToastyX from monitortests.com)

Some miracles happen to you. In one operating system, the video card is detected and in the other not. I have rarely seen this. Check the power supply, raiser and write your hardware configuration, because it is very difficult to be psychic.
For an AMD video card, you need to install drivers that will be newer than May 2020, because the problem of a 4 GB dag file is solved there.

babnero

newbie

Activity: 7

Merit: 1

Yes I did but it only worked in windows 7 after I get the error but didn't work on windows 10

Quote from: DrX on September 21, 2021, 02:25:44 AM

Quote from: babnero on September 20, 2021, 12:07:25 PM

I did install hiveos but only the rx 580 shows up I also have gigabyte gtx 1070ti which didn't shows up in hiveos even nicehash other nvidia card works very well on windows 7 about three nvidia but the rx 580 8gb didn't even on windows 10 I get error 43

RX580 bios modded? did you run AMD/ATI Pixel Clock Patcher? (By ToastyX from monitortests.com)

DrX

member

Activity: 233

Merit: 20

Quote from: babnero on September 20, 2021, 12:07:25 PM

I did install hiveos but only the rx 580 shows up I also have gigabyte gtx 1070ti which didn't shows up in hiveos even nicehash other nvidia card works very well on windows 7 about three nvidia but the rx 580 8gb didn't even on windows 10 I get error 43

RX580 bios modded? did you run AMD/ATI Pixel Clock Patcher? (By ToastyX from monitortests.com)

babnero

newbie

Activity: 7

Merit: 1

I did install hiveos but only the rx 580 shows up I also have gigabyte gtx 1070ti which didn't shows up in hiveos even nicehash other nvidia card works very well on windows 7 about three nvidia but the rx 580 8gb didn't even on windows 10 I get error 43

FP91G

legendary

Activity: 1820

Merit: 1121

Quote from: babnero on September 19, 2021, 06:56:18 AM

Hi I know is been a long time this topic have been updated but please I really need help on drivers that will work on windows 7 for amd graphics card. all nvidia graphics cards works good but I have rx 580 8gb 2048sp am only getting 8 m/hs people said I should try windows 10 but I always get error when using it . And I try installing the robinhood driver but it didn't install. Get error not compatible with the operating system. Can someone recommend a driver for me

Install the Hive OS on the USB flash drive and configure the mining. At the same time, you will also check your video card.
I would figure out why you have errors in Windows 10.
If the video card is in good working order, then there should be no errors.
But for mining on Windows 10, I recommend using the 2019 version.

babnero

newbie

Activity: 7

Merit: 1

Quote from: adaseb on September 19, 2021, 10:56:14 AM

Quote from: miner29 on September 19, 2021, 08:16:13 AM

Try compute mode…my 570s are all still getting 30+ mhs on eth with no need for hacked drivers. There is no need for a hacked up driver.

There is no compute mode option with the AMD drivers if he is using Windows 7. The option is there for Windows 10, however for Windows 7 AMD never included that option. If he wants to use RX series GPUs and Windows 7, he needs to use the robinh00d drivers.

My advice for the prior post is, you need to install some old AMD driver version from like 2016/2017, and then go to your display drivers and click on update driver and point to the robinh00d directory and it should install. Sometimes it freezes but 5-10 minutes later it should be installed.

You might need to do this for every GPU inside your system. However keep in mind that you got a max 4 GPU limit under Windows 7.

OK let me try and see thanks

DrX

member

Activity: 233

Merit: 20

Quote from: adaseb on September 19, 2021, 10:56:14 AM

Quote from: miner29 on September 19, 2021, 08:16:13 AM

Try compute mode…my 570s are all still getting 30+ mhs on eth with no need for hacked drivers. There is no need for a hacked up driver.

There is no compute mode option with the AMD drivers if he is using Windows 7. The option is there for Windows 10, however for Windows 7 AMD never included that option. If he wants to use RX series GPUs and Windows 7, he needs to use the robinh00d drivers.

My advice for the prior post is, you need to install some old AMD driver version from like 2016/2017, and then go to your display drivers and click on update driver and point to the robinh00d directory and it should install. Sometimes it freezes but 5-10 minutes later it should be installed.

You might need to do this for every GPU inside your system. However keep in mind that you got a max 4 GPU limit under Windows 7.

Little bit pointless but there is 6 gpu hack for Win7 https://lbr.id.lv/6xgpu_mod/

I would use win10 or linux

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Legendary user for have provided us with this driver, I guess this user works for amd and miners around here were the guinea pigs ehhe, anyway, this driver has not been of any usage for quite sometime, dont bother, download the new amd drivers.

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Quote from: miner29 on September 19, 2021, 08:16:13 AM

Try compute mode…my 570s are all still getting 30+ mhs on eth with no need for hacked drivers. There is no need for a hacked up driver.

There is no compute mode option with the AMD drivers if he is using Windows 7. The option is there for Windows 10, however for Windows 7 AMD never included that option. If he wants to use RX series GPUs and Windows 7, he needs to use the robinh00d drivers.

My advice for the prior post is, you need to install some old AMD driver version from like 2016/2017, and then go to your display drivers and click on update driver and point to the robinh00d directory and it should install. Sometimes it freezes but 5-10 minutes later it should be installed.

You might need to do this for every GPU inside your system. However keep in mind that you got a max 4 GPU limit under Windows 7.

miner29

full member

Activity: 1275

Merit: 141

Quote from: babnero on September 19, 2021, 06:56:18 AM

Hi I know is been a long time this topic have been updated but please I really need help on drivers that will work on windows 7 for amd graphics card. all nvidia graphics cards works good but I have rx 580 8gb 2048sp am only getting 8 m/hs people said I should try windows 10 but I always get error when using it . And I try installing the robinhood driver but it didn't install. Get error not compatible with the operating system. Can someone recommend a driver for me

Try compute mode…my 570s are all still getting 30+ mhs on eth with no need for hacked drivers. There is no need for a hacked up driver.

babnero

newbie

Activity: 7

Merit: 1

Hi I know is been a long time this topic have been updated but please I really need help on drivers that will work on windows 7 for amd graphics card. all nvidia graphics cards works good but I have rx 580 8gb 2048sp am only getting 8 m/hs people said I should try windows 10 but I always get error when using it . And I try installing the robinhood driver but it didn't install. Get error not compatible with the operating system. Can someone recommend a driver for me

adaseb

legendary

Activity: 3808

Merit: 1723

Up to 300% + 200 FS deposit bonuses

Quote from: ctsbitcoin on October 10, 2020, 01:45:35 PM

Wow, regardless of what others are saying about W7 being too old...well it is but that's besides the point. Some of us have legit reasons as to why some of our systems are still W7, so relax.

Just to confirm though that even though I am forced to use W7 on one of my systems that I have been able to successfully hash at a pretty decent speed.

8GB 580
XHV @850H/s vs. 200H/s with the latest Adrenaline drivers
RVN @11.5MH/s vs. 9MH/s with the latest Adrenaline drivers

I'm still working on Phoenix with W7 to test my ETH speeds but for now I'm content with XHV.

I downloaded robinh00d's 7z files and extracted them which were actually version 22.19.659.1 drivers and the atikmdag-patcher as he described.

I then downloaded the AMD-Compute-Switcher and walla!

This has taken me a few weeks to figure this out and I know that W10 would have been far easier but that simply is not an option for this instance.

Now my mission is to figure out fan control as 68 degrees with only 34% fan speed is not good. OverdriveNTool does not seem to work in W7 regardless of what version I attempt with whatever AMD driver versions. However so far this is a step in the right direction. Any suggestions on GPU fan control within W7 would be welcome.

Yes, use MSI Afterburner and it will work with setting the fan speeds and clock rates. If you need to undervolt then you need to use WattMan. I used this setup for years without issue.

I stopped using Win7 due to the 4GB dag not loading anymore but its still possible to mine with 8GB cards. I am curious why you are using "AMD Compute Switcher" when the robinhood drivers pretty much have the compute mode enabled, that's why those drivers were released.

With AMD drivers for Win7, none of them had the compute option unless it was Win10, so you were forced to use robinhood drivers. So with robinhood drivers you don't need the Compute switcher.

ctsbitcoin

newbie

Activity: 13

Merit: 1

Wow, regardless of what others are saying about W7 being too old...well it is but that's besides the point. Some of us have legit reasons as to why some of our systems are still W7, so relax.

Just to confirm though that even though I am forced to use W7 on one of my systems that I have been able to successfully hash at a pretty decent speed.

8GB 580
XHV @850H/s vs. 200H/s with the latest Adrenaline drivers
RVN @11.5MH/s vs. 9MH/s with the latest Adrenaline drivers

I'm still working on Phoenix with W7 to test my ETH speeds but for now I'm content with XHV.

I downloaded robinh00d's 7z files and extracted them which were actually version 22.19.659.1 drivers and the atikmdag-patcher as he described.

I then downloaded the AMD-Compute-Switcher and walla!

This has taken me a few weeks to figure this out and I know that W10 would have been far easier but that simply is not an option for this instance.

Now my mission is to figure out fan control as 68 degrees with only 34% fan speed is not good. OverdriveNTool does not seem to work in W7 regardless of what version I attempt with whatever AMD driver versions. However so far this is a step in the right direction. Any suggestions on GPU fan control within W7 would be welcome.

Batmaxpt

newbie

Activity: 12

Merit: 0

Quote from: Mattthev on June 16, 2019, 01:08:53 PM

Guys, really?
This thread is 2 years old! Do not use these drivers either blockchain drivers both are obsolete! Use the latest Adrenaline drivers or those what your miner recommends and switch it to compute workload!

https://mining-bios.eu/guides-and-miners/bios-mod-faqs/#ac_7186_collapse4
https://www.amd.com/en/support/kb/faq/dh-024

no need to install bios ?

Mattthev

sr. member

Activity: 966

Merit: 359

👉MINING-BIOS.eu💲⛏

Quote from: adaseb on June 17, 2019, 01:50:19 AM

From what I recall, you have to use these drivers if you want to mine with Windows 7. The latest AMD drivers version which support compute mode is only for Windows 10, there is no option to enable compute mode on Windows 7.

Even if you toggle the hotkey in Claymore to force it into compute mode, it won't work with Windows 7.

This is why its recommended to upgrade to Linux or Win 10, since another issue with Win 7 is that 4 GPUs are max. You can't use more than 4 GPUs which are the newer RX unlike the older Tahiti/Hawaii GPUs.

Windows 7 is the only exception, but who the hell uses Windows 7 for mining in 2019 anyway? I even delete that info from FAQ, there is no reason to use Windows 7 anymore.

Topic: Ethash DAG epoch RX470/480/570/580 FIX !! (Read 151564 times)