Thanks for your reply,
Well I'm with Nvidia video card and not sure what I must select. Is that only for AMD video card? I tried selecting some but ..
Topic: GUIMiner-scrypt: A GUIMiner fork for mining scrypt chains - page 22. (Read 994016 times)
did you selected the presets for your card ?
he made a very good job !
point it to your pool and select your presets drop down in the right corner and you are ready to go.
he made a very good job !
point it to your pool and select your presets drop down in the right corner and you are ready to go.
Hey guys,
I'm new to this forum and mining ..
So I've downloaded GUIMiner-script, registered to cointron.com, created worker, and set Host:coinotron.com, port: 3334, Username: workername, pass: workerpass, Thread concurrency: 8000, Intensity: 20, GPU Defaults: 7870 (high usage) and hit the Start button. It says Connecting and nothing happens. In the Console it shows this:
Am I missing something or doing something wrong?
Thanks
I'm new to this forum and mining ..
So I've downloaded GUIMiner-script, registered to cointron.com, created worker, and set Host:coinotron.com, port: 3334, Username: workername, pass: workerpass, Thread concurrency: 8000, Intensity: 20, GPU Defaults: 7870 (high usage) and hit the Start button. It says Connecting and nothing happens. In the Console it shows this:
Code:
2013-04-09 15:00:40: Running command: D:\GuiMiner Script\guiminer-scrypt_win32_binaries_v0.03\cgminer\cgminer.exe --scrypt -u workername -p workerpass -o stratum+tcp://coinotron.com:3334 --gpu-platform 0 -d 0 -w 256 -v 1 -I 20 -g 1 -l 1 -T --thread-concurrency 8000
2013-04-09 15:00:40: Listener for "Default" started
2013-04-09 15:00:43: Listener for "Default": [2013-04-09 15:00:40] Started cgminer 2.11.3
2013-04-09 15:00:43: Listener for "Default": [2013-04-09 15:00:40] Probing for an alive pool
2013-04-09 15:00:43: Listener for "Default": [2013-04-09 15:00:41] Stratum from pool 0 detected new block
2013-04-09 15:00:43: Listener for "Default": [2013-04-09 15:00:41] Maximum buffer memory device 0 supports says 234881024
2013-04-09 15:00:43: Listener for "Default": [2013-04-09 15:00:41] Your scrypt settings come to 524288000
2013-04-09 15:00:43: Listener for "Default": [2013-04-09 15:00:41] Error -4: Enqueueing kernel onto command queue. (clEnqueueNDRangeKernel)
2013-04-09 15:00:43: Listener for "Default": [2013-04-09 15:00:41] GPU 0 failure, disabling!
2013-04-09 15:00:43: Listener for "Default": [2013-04-09 15:00:41] Thread 0 being disabled
2013-04-09 15:00:43: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:00:45: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:00:47: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:00:49: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:00:51: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:00:53: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:00:55: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:00:57: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:2 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:00:59: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:2 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:01:01: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:2 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:01:03: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:2 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:01:05: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:2 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:01:07: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:2 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:01:09: Listener for "Default": [2013-04-09 15:01:09] Stratum from pool 0 detected new block
2013-04-09 15:01:09: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:3 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:01:11: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:3 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:01:13: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:3 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:01:15: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:3 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-09 15:01:17: Listener for "Default" shutting down
Am I missing something or doing something wrong?
Thanks
So, I've got a ton of rigs running this now with zero problems...all of them setup the same w/ 13.3 drivers and win7 64bit running 7970s.
I have one right that is being an absolute PITA and throwing out an error that tells me to check out the log file...
This is what the log reports everytime I try to run the program:
Don't suppose you have any idea what this is about??
I have one right that is being an absolute PITA and throwing out an error that tells me to check out the log file...
This is what the log reports everytime I try to run the program:
Quote
ERROR:root:Exception:
Traceback (most recent call last):
File "guiminer.py", line 2845, in run
File "guiminer.py", line 2130, in __init__
File "json\__init__.pyo", line 278, in load
File "json\__init__.pyo", line 326, in loads
File "json\decoder.pyo", line 360, in decode
File "json\decoder.pyo", line 378, in raw_decode
ValueError: No JSON object could be decoded
Traceback (most recent call last):
File "guiminer.py", line 2845, in run
File "guiminer.py", line 2130, in __init__
File "json\__init__.pyo", line 278, in load
File "json\__init__.pyo", line 326, in loads
File "json\decoder.pyo", line 360, in decode
File "json\decoder.pyo", line 378, in raw_decode
ValueError: No JSON object could be decoded
Don't suppose you have any idea what this is about??
Thanks for the program. Was looking for alternative to reaper with stratum support.
tacotime
how to change the language?
changes the language, reboot, but the language is English, and not that I need.
how to change the language?
changes the language, reboot, but the language is English, and not that I need.
Sorry, I haven't translated it into any other languages yet. What language do you need?
russian please
the program says version 0.02? is the wrong one uploaded?
oh also the console view does not give you as much information as the command line version?
thanks.
oh also the console view does not give you as much information as the command line version?
thanks.
I want to thank everyone for the generous donations they have made to the guiminer-scrypt project.
I will be posting version 0.04 soon which will have a bunch of minor fixes for bugs.
I will be posting version 0.04 soon which will have a bunch of minor fixes for bugs.
Code:
2013-04-08 18:28:27: Running command: C:\Users\4\Desktop\LTC\cgminer\cgminer.exe --scrypt -u mteachx.6850_1 -p 6850 -o http://litecoinpool.org:9332 --gpu-platform 0 -d 0 -w 256 -v 1 -I 13 -g 1 -l 1 -T --thread-concurrency 6144
2013-04-08 18:28:27: Listener for "Default" started
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:27] Started cgminer 2.11.3
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:29] Probing for an alive pool
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:30] Switching pool 0 http://litecoinpool.org:9332 to stratum+tcp://nl.litecoinpool.org:3333
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:31] Error -5: Enqueueing kernel onto command queue. (clEnqueueNDRangeKernel)
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:31] GPU 0 failure, disabling!
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:31] Thread 0 being disabled
2013-04-08 18:28:33: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-08 18:28:35: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-08 18:28:37: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-08 18:28:39: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-08 18:28:41: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-08 18:28:43: Listener for "Default" shutting down
What i should to do?
I have similar machines, some working, some don't.
W7 x86
12.8 Catalyst
That sounds like a driver related issue, I'm not sure what the problem is.
tacotime
how to change the language?
changes the language, reboot, but the language is English, and not that I need.
how to change the language?
changes the language, reboot, but the language is English, and not that I need.
Sorry, I haven't translated it into any other languages yet. What language do you need?
Code:
2013-04-08 18:28:27: Running command: C:\Users\4\Desktop\LTC\cgminer\cgminer.exe --scrypt -u mteachx.6850_1 -p 6850 -o http://litecoinpool.org:9332 --gpu-platform 0 -d 0 -w 256 -v 1 -I 13 -g 1 -l 1 -T --thread-concurrency 6144
2013-04-08 18:28:27: Listener for "Default" started
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:27] Started cgminer 2.11.3
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:29] Probing for an alive pool
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:30] Switching pool 0 http://litecoinpool.org:9332 to stratum+tcp://nl.litecoinpool.org:3333
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:31] Error -5: Enqueueing kernel onto command queue. (clEnqueueNDRangeKernel)
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:31] GPU 0 failure, disabling!
2013-04-08 18:28:33: Listener for "Default": [2013-04-08 18:28:31] Thread 0 being disabled
2013-04-08 18:28:33: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-08 18:28:35: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-08 18:28:37: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-08 18:28:39: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-08 18:28:41: Listener for "Default": (1s):0.000 (avg):0.000h/s | Q:1 A:0 R:0 HW:0 E:0% U:0.0/m
2013-04-08 18:28:43: Listener for "Default" shutting down
What i should to do?
I have similar machines, some working, some don't.
W7 x86
12.8 Catalyst
tacotime
how to change the language?
changes the language, reboot, but the language is English, and not that I need.
how to change the language?
changes the language, reboot, but the language is English, and not that I need.
I just thought of a great idea....
add an option that allows a user to essentially enter in the exact same information as you would to get guiminer up and running...but instead of mining in the gui it will spit out a config file that you can copy to the desktop and run.
IMO, a properly configured cgminer is almost more user friendly then the guiminer (however guiminer is easier to setup for a complete new guy).
I can't imagine it would be THAT much work to implement, however I an not technically capable of such a task.. so I suggest it here instead
keep up the great work taco.
add an option that allows a user to essentially enter in the exact same information as you would to get guiminer up and running...but instead of mining in the gui it will spit out a config file that you can copy to the desktop and run.
IMO, a properly configured cgminer is almost more user friendly then the guiminer (however guiminer is easier to setup for a complete new guy).
I can't imagine it would be THAT much work to implement, however I an not technically capable of such a task.. so I suggest it here instead
keep up the great work taco.
As the other user stated, it does dump the mining command to console. In the next version I'll make it automatically output a "mine-yourminername.bat" file to the cgminer folder though so you can run them from the console if you like too (should also help people troubleshooting the program)
20=675 (no glitching so far!)
Not sure why 20 is suddenly working smoothly, but I'll leave it there until it causes problems.
Not sure why 20 is suddenly working smoothly, but I'll leave it there until it causes problems.
I figured out how to run at intensity 20 without glitching my desktop!
All I have to do is NOT run GPU-Z. I'd been using it to monitor my temps and GPU utilization.
With GPU-Z running, my desktop becomes unusable, with the mouse running at around 0.5-1 fps.
With GPU-Z turned off, no problems, PC runs as normal, plus a rock-solid 676Kh/s!
Thanks for the help Tacotime!
For me as well, guiminer consistently under reports khash. This is true of 4 different rigs with 7xxx cards. Not a big deal, b/c I can always just check long term hashing with the pool which is the most reliable measure, but it makes hardware tweaking a little more difficult if I can't accurately judge the changes at the machine level.
This is strange. I tested it today with a 7970 and I got the same results in cgminer from the console as with the guiminer. The program just pulls the rates in KH/s from stdout, so they should be the same. I noticed that for some reason after a while rates can decrease, though. I will have to look into it and figure out what's going on.
Specifically for tuning I really like th 1s, 5s, and avg. display of cgminer. What would be even better would be an average that you could reset, that way you could try a new setting and see the average since the change without restarting cgminer or guiminer.
add an option that allows a user to essentially enter in the exact same information as you would to get guiminer up and running...but instead of mining in the gui it will spit out a config file that you can copy to the desktop and run.
I think Tacotime already addressed how to do exactly that, about 5 posts above yours.
and I quote: "You can actually use guiminer-scrypt to generate the cgminer run command if you want to use it from a bat, just go to View --> Show Console and then click to run your cgminer on one of the other computers. It will automatically dump the command to mine with it."
Is that what you meant?
I just thought of a great idea....
add an option that allows a user to essentially enter in the exact same information as you would to get guiminer up and running...but instead of mining in the gui it will spit out a config file that you can copy to the desktop and run.
IMO, a properly configured cgminer is almost more user friendly then the guiminer (however guiminer is easier to setup for a complete new guy).
I can't imagine it would be THAT much work to implement, however I an not technically capable of such a task.. so I suggest it here instead
keep up the great work taco.
add an option that allows a user to essentially enter in the exact same information as you would to get guiminer up and running...but instead of mining in the gui it will spit out a config file that you can copy to the desktop and run.
IMO, a properly configured cgminer is almost more user friendly then the guiminer (however guiminer is easier to setup for a complete new guy).
I can't imagine it would be THAT much work to implement, however I an not technically capable of such a task.. so I suggest it here instead
keep up the great work taco.
Tried 'd' flag for intensity, didn't work. My hash was stuck at 18 Kh/s.
Tried other values:
12=290
13=566 (why better than 14?)
14=417
20=675 (no glitching so far!)
Not sure why 20 is suddenly working smoothly, but I'll leave it there until it causes problems.
Thanks!
Tried other values:
12=290
13=566 (why better than 14?)
14=417
20=675 (no glitching so far!)
Not sure why 20 is suddenly working smoothly, but I'll leave it there until it causes problems.
Thanks!
Yes, try 12.8 drivers and set your intensity to "d" in cgminer so it mines when afk
Will do, thanks.
How do I set the intensity to 'd'?
Do I just type that in the box in place of the current # (ie 13)?
Yep
Jump to: