Topic: GUIMiner-scrypt: A GUIMiner fork for mining scrypt chains - page 17. (Read 994016 times)

I can't believe that worked but Thank You.

Had to move the 7950 to my fourth slot and now all 4 work together.
For some reason it doesnt like it in slots 1,2, or 3.

Will send tip once I get home.

Thank you Tacotime.

This week, code is about half done

When will you add Cudaminer?

@3Dfilament
what version of guiminer do you use v0.03?
where is your stratum on off dropdown?

- Sapphire 7950 (11196-16-20G)
- ASUS P8Z68-V Pro (motherboard)
- 8GB RAM
- i5-2500K
- Crucial M4SSD (128MB)
- Win 7 Pro
- REAPER -> (Using tacotime's GUIMiner - Alpha Scrypt)
- Mining FTC, (feathercoin), at featherpool.com

===============================



===============================



===============================

Mining feathercoin, (will post another entry for LTC mining results with wemineltc.com at some point.)

This is stock mining, no Overclocking, so significantly better results are expected with mild, to medium overclocking.

CONSOLE DATA of INTEREST:
======================

2013-04-28 09:46:41: Listener for "FP 21888 19": Error 28 getting work. See http://curl.haxx.se/libcurl/c/libcurl-errors.html for error code explanations.
2013-04-28 09:46:41: Listener for "FP 21888 19": 2013-04-28 09:46:41 Couldn't connect to server. Trying again in a few seconds...
2013-04-28 09:46:41: Listener for "FP 21888 19": Getwork took 5.07 s!
2013-04-28 09:46:41: Listener for "FP 21888 19": Share submit took 6.178 s!

2013-04-28 12:44:20: Listener for "FP 21888 19": Error 28 getting work. See http://curl.haxx.se/libcurl/c/libcurl-errors.html for error code explanations.
2013-04-28 12:44:20: Listener for "FP 21888 19": 2013-04-28 12:44:20 Couldn't connect to server. Trying again in a few seconds...
2013-04-28 12:44:24: Listener for "FP 21888 19": Share submit took 15.512 s!
2013-04-28 12:44:24: Listener for "FP 21888 19": Share submit took 13.647 s!
2013-04-28 12:44:28: Listener for "FP 21888 19": Share submit took 9.129 s!

2013-04-28 13:00:31: Listener for "FP 21888 19": Share submit took 9.129 s!
2013-04-28 13:00:43: Listener for "FP 21888 19": Could not connect. Server down?
2013-04-28 13:00:43: Listener for "FP 21888 19": 2013-04-28 13:00:43 Couldn't connect to server. Trying again in a few seconds...
2013-04-28 13:00:47: Listener for "FP 21888 19": Share submit took 9.115 s!

2013-04-28 13:40:26: Listener for "FP 21888 19": Share submit took 8.767 s!
2013-04-28 13:40:26: Listener for "FP 21888 19": Getwork took 11.311 s!
2013-04-28 13:40:31: Listener for "FP 21888 19": Share submit took 9.145 s!
2013-04-28 13:47:13: Listener for "FP 21888 19": Getwork took 16.686 s!
2013-04-28 13:47:13: Listener for "FP 21888 19": Share submit took 16.635 s!
2013-04-28 13:47:14: Listener for "FP 21888 19": Share submit took 15.883 s!
2013-04-28 13:47:14: Listener for "FP 21888 19": Share submit took 14.002 s!
2013-04-28 13:47:16: Listener for "FP 21888 19": Share submit took 9.152 s!
2013-04-28 13:47:17: Listener for "FP 21888 19": Share submit took 9.157 s!
2013-04-28 13:47:17: Listener for "FP 21888 19": Share submit took 9.171 s!
2013-04-28 13:47:19: Listener for "FP 21888 19": Share submit took 9.289 s!
2013-04-28 13:47:22: Listener for "FP 21888 19": Weird response from server.
2013-04-28 13:47:22: Listener for "FP 21888 19": Share submit took 20.997 s!
2013-04-28 13:47:25: Listener for "FP 21888 19": Weird response from server.

2013-04-28 15:46:26: Listener for "FP 21888 19": Could not connect. Server down?
2013-04-28 15:46:26: Listener for "FP 21888 19": 2013-04-28 15:46:26 Couldn't connect to server. Trying again in a few seconds...
2013-04-28 15:46:29: Listener for "FP 21888 19": Share submit took 9.403 s!

2013-04-28 16:18:13: Listener for "FP 21888 19": Error 28 getting work. See http://curl.haxx.se/libcurl/c/libcurl-errors.html for error code explanations.
2013-04-28 16:18:13: Listener for "FP 21888 19": 2013-04-28 16:18:13 Couldn't connect to server. Trying again in a few seconds...
2013-04-28 16:18:15: Listener for "FP 21888 19": Share submit took 9.13 s!
2013-04-28 16:18:15: Listener for "FP 21888 19": Share submit took 9.123 s!
2013-04-28 16:18:17: Listener for "FP 21888 19": Share submit took 9.129 s!
2013-04-28 16:18:23: Listener for "FP 21888 19": Weird response from server.
2013-04-28 16:18:23: Listener for "FP 21888 19": Share submit took 21 s!

2013-04-28 16:59:27: Listener for "FP 21888 19": Getwork took 9.789 s!

Try one card at a time. Uninstall drivers and reinstall them

Reseat the GPU and the extender or try swapping the cards around

I can't seem to get my computer back up and mining.

I was originally using Reaper (not through guiminer but standalone) and it was fine with my 3 - 6870s. I added a new 7950 and now it will not work for any of my cards.

So I installed guiminer and tried running it through guiminer.

I receive the same thing when trying to run through cgminer and reaper.

-Reaper-
I enter all of my information, press start, it gets to the part:
"Compiling kernel... this could take up to 2 minutes."

-CGminer-
I enter all of my information, press start, it gets to the part:
"Listener for "Miner" started"

And then Windows pops up saying:
"reaper.exe has stopped working"
"cgminer.exe has stopped working"

I have the most up to date AMD Catalyst Suite.
I have the most up to date AMD APP SDK.

But I can't seem to get anything to mine now. I'm sure it is probably something dumb.

Any help would be greatly appreciated.

-Rest of system-

Sabertooth 990fx mobo
3 - 6870
1 - 7950

These defaults are great, do you know if they're any plans to add these to GUIminer?

Don't worry..health comes always first.

Wish you get well soon

FEATURE SUGGESTION:

- Automated tuning function to find the most profitable settings

--- logs stale/invalid to shares accepted ratio (creates percentage)
--- StlsInvld/ShrsTRUE(Tune, TC, Intensity)

Automatically adjusts the card for performance, or reports ranges which the user can draw a baseline from.

SSSSOOOOO ...   ... a discussion as to WHY stales and invalids MIGHT be less with the new drivers, might prove stimulating ... or, why they might foresee-ably NOT have an impact on stales/invalids, and ... what can help lower stales and invalidzzz,  

UPDATE: Stales/invalid rate re-appeared at baseline settings, adjusted intensity to 20, low stales rate again, with increased khash/s from baseline screenshot, will let this run for a good while to test it. Just making tiny changes, one at a time.

! ! ! UPDATE ! ! ! 04-27-2013

CT disconnects and 15% - 25% stales invalids, connection problems with CT today, I'm in the U.S., so I switched pools, I've had issues with CT more than I like, probably because I'm in the U.S. and they are in Poland, I think.

I'm on PPLNS now at wemineltc and the GUIMiner just works great there. Same card, same settings as in the screenshot, 0 stales rates, (it's PPLNS and it's a U.S. Server), 527 khash/s testing with this single card the new pool. They have an IRC chat as well, and the site looks nice, simple and tight. I'll push this card here with these newest Beta drivers, and OC it a hair after a few payouts and statistic logging.

THANKS Tacotime, and best of health to you, get well and be well!

is there any command that can restart mining? lets say i want to restart mining ion every 2hr?

Is there a way you could build in something to allow a staggered autostart instead of starting all miners at once? I've noticed that on autostart that the miners will run about 50kH/s slower if all started at system startup on their own. If I start them up with about a 30-60 second delay in-between each miner, they pull higher kH/s and stay higher. The autostart ones start out 50kH/s lower and stay lower.

Thanks tacotime! (:

hi, can you make it work with 7790. for some reason nothing happens when i try to run it

Yes

New version coming soon, I'm done my exams but am very sick so not as much work on this or MC2 has gotten done.  Sorry guys

Are you still having issues? I had the same error.

Step 1. Uninstall driver with utility.
Step 2. Delete all GUIminer scypt alpha files.
Step 3. Reboot computer
Step 4. Reinstall latest driver, 13.4
Step 5. Get GUIminer scrypt alpha

It might fix this issue.

Dumb Question... as of 04-25-13 Is the latest version of this on the original first posting?

I have both GUIMiners running on multiple computers without issue. I mine TRC, LTC and FC.

Thanks for confirming those settings, I like to run conservatively. But the best cards I have, I will OC just a bit to squeeze up to 584 out of them in a well controlled, small miner room.