Pages:
Author

Topic: High Efficiency FPGA & ASIC Bitcoin Mining Devices https://BTCFPGA.com - page 96. (Read 218478 times)

full member
Activity: 209
Merit: 100
Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at [email protected] or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans


I did all that, restarted it, It went through the programming, and then setting the clock speed using the cgminer-2.4.2mmq build, but still not seeing any shares accepted or rejected.

On the cgminer-2.4.3-win32 build, it seems to just crash still.



Phil

Could you try running cgminer with 2>log.txt -D  and send the log.txt to [email protected]

vip
Activity: 574
Merit: 500
Don't send me a pm unless you gpg encrypt it.
edit: and of course imsaguy :

Matthew or anyone else other than me and stcupp do not have any knowledge what so ever of when orders or shipments were/are made.

That's what I kinda figured. Smiley

my point was before he launched we bought the boards first and we didnt announce it, so i am bit surprised everyone is getting their boards before us , since we (RSM) were the first customer of this new fpga company

we were first in line and i was hoping we would get the 9% refund too !

So why not contact him directly?
vip
Activity: 574
Merit: 500
Don't send me a pm unless you gpg encrypt it.
Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at [email protected] or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans


I did all that, restarted it, It went through the programming, and then setting the clock speed using the cgminer-2.4.2mmq build, but still not seeing any shares accepted or rejected.

On the cgminer-2.4.3-win32 build, it seems to just crash still.



Phil

send email to [email protected]

he is available now to provide tech support

how about an irc channel.. like #btcfpga on freenode?
hero member
Activity: 896
Merit: 1000
Buy this account on March-2019. New Owner here!!
Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at [email protected] or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans


I did all that, restarted it, It went through the programming, and then setting the clock speed using the cgminer-2.4.2mmq build, but still not seeing any shares accepted or rejected.

On the cgminer-2.4.3-win32 build, it seems to just crash still.



Phil

send email to [email protected]

he is available now to provide tech support
vip
Activity: 574
Merit: 500
Don't send me a pm unless you gpg encrypt it.
edit: and of course imsaguy :

Matthew or anyone else other than me and stcupp do not have any knowledge what so ever of when orders or shipments were/are made.

That's what I kinda figured. Smiley
hero member
Activity: 866
Merit: 1001
Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at [email protected] or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans


I did all that, restarted it, It went through the programming, and then setting the clock speed using the cgminer-2.4.2mmq build, but still not seeing any shares accepted or rejected.

On the cgminer-2.4.3-win32 build, it seems to just crash still.



Phil
legendary
Activity: 1372
Merit: 1003
hello

I work with ceo of RSM , i am investor in RSM

we ordered your boards long time ago before anyone else , we still havent got them while everyone else getting them along with 9% discount

are we going to get 9% , has our 2 boards been sent yet ?

how come we never got them first before everyone else , since we ordered them first ?

How do you know the order of the purchases?

It was public in our Red Star Mining thread

So you know when the card that was shipped to me was ordered?

Sorry crossed wires I think  Undecided
hero member
Activity: 896
Merit: 1000
Buy this account on March-2019. New Owner here!!
Let me just clear something up here please

Matthew is a friend and employee of mine and he actually purchased his units while we were still prototyping

and way before we ever even went public with them or anyone had ever even heard of the modminer quad or BTCFPGA.com

he was sent a prototype at one time but asked if he could send it back and upgrade to the new and improved unit which I agreed to do

This mess is my mess to clear up - I should of never agreed to sell a prototype but at the time we were in need of funding and I thought it was the right thing to do.

As I have already explained to Matthew he is not entitled to the 9% discount because we never guaranteed a shipping time with him and this 9% discount did not even exist at the time he purchased one from me. Hell this business did not even really exist when he purchased one from me.

Your units are on the way and will be tracking soon. If you have any more questions you can certainly email me at [email protected]

edit: and of course imsaguy :

Matthew or anyone else other than me and stcupp do not have any knowledge what so ever of when orders or shipments were/are made.

vip
Activity: 574
Merit: 500
Don't send me a pm unless you gpg encrypt it.
hello

I work with ceo of RSM , i am investor in RSM

we ordered your boards long time ago before anyone else , we still havent got them while everyone else getting them along with 9% discount

are we going to get 9% , has our 2 boards been sent yet ?

how come we never got them first before everyone else , since we ordered them first ?

How do you know the order of the purchases?

It was public in our Red Star Mining thread

So you know when the card that was shipped to me was ordered?
legendary
Activity: 1372
Merit: 1003
hello

I work with ceo of RSM , i am investor in RSM

we ordered your boards long time ago before anyone else , we still havent got them while everyone else getting them along with 9% discount

are we going to get 9% , has our 2 boards been sent yet ?

how come we never got them first before everyone else , since we ordered them first ?

How do you know the order of the purchases?

It was public in our Red Star Mining thread
vip
Activity: 574
Merit: 500
Don't send me a pm unless you gpg encrypt it.
hello

I work with ceo of RSM , i am investor in RSM

we ordered your boards long time ago before anyone else , we still havent got them while everyone else getting them along with 9% discount

are we going to get 9% , has our 2 boards been sent yet ?

how come we never got them first before everyone else , since we ordered them first ?

How do you know the order of the purchases?
legendary
Activity: 1372
Merit: 1003
hello

I work with ceo of RSM , i am investor in RSM

we ordered your boards long time ago before anyone else , we still havent got them while everyone else getting them along with 9% discount

are we going to get 9% , has our 2 boards been sent yet ?

how come we never got them first before everyone else , since we ordered them first ?

We should have the boards by this Friday to Monday hopefully.  I think they were posted today?
vip
Activity: 574
Merit: 500
Don't send me a pm unless you gpg encrypt it.
Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at [email protected] or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans

Leave it named MMQ.bin or rename it firmware.bin?

full member
Activity: 209
Merit: 100
Sorry I wasn't around today everyone!

All cards were tested before they were sent out. I do have a new firmware for the ARM chip for everyone though!

http://fs07n5.sendspace.com/dl/56045c81d8dc87863633a93d98caa90a/4fe0dd5d18e34a41/0ixpqy/MMQ.zip

Reset button is on the left
ISP button is on the right

To do the update:

Hold BOTH the Reset and ISP buttons
Release the Reset button while still holding the ISP button
Release the ISP button
Unplug USB and plug it back in, the board will now show up as a mass storage device
Open the MSD and you should see one file named firmware.bin
Delete firmware.bin and copy the new firmware file to the device
If running linux make sure you sync/unmount the drive first
Unplug USB, hit the Reset button, and plug USB back in
The firmware is now updated.

If your still having problems email me at [email protected] or post here and I'll get back to you ASAP

Make sure your cards are in the socket nice and snug I've seen cards get wiggled loose from the vibrations of fans


hero member
Activity: 896
Merit: 1000
Buy this account on March-2019. New Owner here!!

Luckily these are made to update the firmware very easily and I am guessing this is what we are going to have to do.

as soon as stcupp comes online we will get these all up and running, thank you for being patient.
vip
Activity: 574
Merit: 500
Don't send me a pm unless you gpg encrypt it.
Just for the hell of it, have you tried it on a different pool other than GPUMAX?


It probably wont make a difference but I am curious, considering GPUMAX is not a traditional pool.

I have a feeling we may need to issue a firmware update today, as soon as stcupp comes around we will get to the bottom of this, thanks for being patient but I assure you we will get to the bottom of this and get it resolved TODAY.





All of my testing was on eligius.
hero member
Activity: 896
Merit: 1000
Buy this account on March-2019. New Owner here!!
Just for the hell of it, have you tried it on a different pool other than GPUMAX?


It probably wont make a difference but I am curious, considering GPUMAX is not a traditional pool.

I have a feeling we may need to issue a firmware update today, as soon as stcupp comes around we will get to the bottom of this, thanks for being patient but I assure you we will get to the bottom of this and get it resolved TODAY.



hero member
Activity: 866
Merit: 1001
Yep it is getting work from the pool. Currently connected to gpumax, and can see longpolls every so often.



This is what I'm seeing.

Phil
hero member
Activity: 896
Merit: 1000
Buy this account on March-2019. New Owner here!!
Please accept my apologies for all of these problems,


But I assure you our engineer will tend to all of these issues today

I have a feeling something got changed when they incorporated Luke-JR's code into CGMINER

(I could be wrong)

but try this:


http://btcwebhost.com/cgminer-2.4.2mmq.rar
(This is Luke-JR's original code and was known to work without issue)

Also if you have the option to use Linux instead of windows you may have better luck with 2.4.3 or Luke-JR's BFG miner.

for any specific technical questions please email to [email protected]

do not worry we will get to the bottom of all of these problems today.



ok, with this version, it is working. After a few mins of it being programmed, I see MMQ at 30C and the program running.

Update: I can see it changing the clock speed, but it is not having any work accepted or rejected?

Phil

Phil does it give you the message about the alive pool?

I know your anxious to get this working but please send [email protected] an email as soon as he has a chance he will get you up and running

sorry about the hassle
vip
Activity: 574
Merit: 500
Don't send me a pm unless you gpg encrypt it.
Please accept my apologies for all of these problems,


But I assure you our engineer will tend to all of these issues today

I have a feeling something got changed when they incorporated Luke-JR's code into CGMINER

(I could be wrong)

but try this:


http://btcwebhost.com/cgminer-2.4.2mmq.rar
(This is Luke-JR's original code and was known to work without issue)

Also if you have the option to use Linux instead of windows you may have better luck with 2.4.3 or Luke-JR's BFG miner.

for any specific technical questions please email to [email protected]

do not worry we will get to the bottom of all of these problems today.



I can give it a go in about 10 hours from now.  Thanks.
Pages:
Jump to: