0.6-159@200918 🐧
SYSTEM 🖥
⚙️ Added 'agent' configuration sync after loosing connection to Hive API servers
⚙️ Improved DoH [DNS-over-HTTPS] implementation (added service control from web interface, added AliDNS servers)
⚙️ Minor fixes for VBIOS flashing procedure (fixed mem size reporting for GPU with 10Gb+, fixed empty Nvidia flashing log, fixed issue of no reboot after successful flashing)
MINERS👷♂️
⛏ T-Rex v0.17.2 (added 'ethash' and 'progpowz' algos; add 'gpu-init-mode' parameter: enables sequential DAG generation to reduce load on power supplies, print hash rate if no shares have been found for more than 1 minute to indicate miner's activity; bugs fixes: CUDA 11 build not working on some algorithms and RTX cards, GPU is idle error when generating DAG on low-end cards)
⛏ WildRig-Multi v0.26.0 (implemented 'megabtx', 'megamec' and 'minotaur' algos; added default --opencl-launch for p102, p104 and p106 gpu's)
⛏ Bminer v16.3.1 (enable tuning memory timings for 'ethash' on NVIDIA GPUs via the '-fast' option)
⛏ SRBMiner-Multi v0.5.2 (added 'verushash' for GPU mining, 'verushash' on CPU optimised a little bit, 'ethash' on GPU optimised a little bit, removed 'MTP' algo)
Topic: Hiveon. №1 OS for mining - page 25. (Read 80843 times)
0.6-157@200908 🐧
SYSTEM 🖥
⚙️ Improved amd-info tool (pretty GPU names output, added VRAM info: total/used/free)
MINERS👷♂️
⛏ TeamRedMiner v0.7.10 (added MTP for Navi GPUs, added ethash forced initial allocated epoch --eth_alloc_epoch=N ; added ethash family DAG build slowdown configuration --eth_dag_slowdown=N, default value 4; for eth+zil or Nicehash mining try using --eth_dag_slowdown=9)
⛏ Fixed stats on some miners (NanoMiner, Bminer)
0.6-158@200913 🐧
SYSTEM 🖥
⚙️ Minor autofan changes (changed type of messages to error instead warning when reboot action required)
⚙️ Improved DoH support (added dnscrypt tool)
MINERS👷♂️
⛏ SRBMiner v0.5.1 (added support new algos: argon2id_chukwa, argon2d_dynamic, cryptonight_ccx, cryptonight_xhv, cryptonight_gpu,
cryptonight_upx, cryptonight_heavyx, verushash; added GPU auto tune functionality; other improvements and bug fixes; Notice: new multialgo support will be added after web update)
⛏ Bminer: fixed stats for rigs with iGPU
SYSTEM 🖥
⚙️ Improved amd-info tool (pretty GPU names output, added VRAM info: total/used/free)
MINERS👷♂️
⛏ TeamRedMiner v0.7.10 (added MTP for Navi GPUs, added ethash forced initial allocated epoch --eth_alloc_epoch=N ; added ethash family DAG build slowdown configuration --eth_dag_slowdown=N, default value 4; for eth+zil or Nicehash mining try using --eth_dag_slowdown=9)
⛏ Fixed stats on some miners (NanoMiner, Bminer)
0.6-158@200913 🐧
SYSTEM 🖥
⚙️ Minor autofan changes (changed type of messages to error instead warning when reboot action required)
⚙️ Improved DoH support (added dnscrypt tool)
MINERS👷♂️
⛏ SRBMiner v0.5.1 (added support new algos: argon2id_chukwa, argon2d_dynamic, cryptonight_ccx, cryptonight_xhv, cryptonight_gpu,
cryptonight_upx, cryptonight_heavyx, verushash; added GPU auto tune functionality; other improvements and bug fixes; Notice: new multialgo support will be added after web update)
⛏ Bminer: fixed stats for rigs with iGPU
0.6-156@200904 🐧
What's new?
SYSTEM 🖥
⚙️ Improved third-party hardware support (added new CoolBox fan controller)
⚙️ Improved OC applying procedure after hello command
⚙️ Fixed agent behavior on change rig password
MINERS👷♂️
⛏ CryptoDredge v0.25.1 (fixed high CPU usage on MTP when 'Received new job', improved MTP and Argon2d-NIM algorithms, Allow floating-point intensity, removed obsolete algorithms, bug fixes)
⛏ T-Rex v0.16.2 (bug fixes: 'can't init enumerate, code -6' error when applying memory tweaks to P102/104/106 cards, memory tweaks stuck after the miner termination, memory tweaks becoming inactive in case of network issues or overclock adjustments)
⛏ Gminer v2.22 (added 3GB solver for BeamHashIII)
⛏ miniZ v1.6v6 (improved stability in all algorithms, fixed invalid shares while mining BEAM, smarter check for ssl/tls mining, other minor bug fixes)
⛏ Update XMRig-CUDA plugin to v6.3.2 (fixed broken AstroBWT
What's new?
SYSTEM 🖥
⚙️ Improved third-party hardware support (added new CoolBox fan controller)
⚙️ Improved OC applying procedure after hello command
⚙️ Fixed agent behavior on change rig password
MINERS👷♂️
⛏ CryptoDredge v0.25.1 (fixed high CPU usage on MTP when 'Received new job', improved MTP and Argon2d-NIM algorithms, Allow floating-point intensity, removed obsolete algorithms, bug fixes)
⛏ T-Rex v0.16.2 (bug fixes: 'can't init enumerate, code -6' error when applying memory tweaks to P102/104/106 cards, memory tweaks stuck after the miner termination, memory tweaks becoming inactive in case of network issues or overclock adjustments)
⛏ Gminer v2.22 (added 3GB solver for BeamHashIII)
⛏ miniZ v1.6v6 (improved stability in all algorithms, fixed invalid shares while mining BEAM, smarter check for ssl/tls mining, other minor bug fixes)
⛏ Update XMRig-CUDA plugin to v6.3.2 (fixed broken AstroBWT
Phoenixminer crashes and then system reboots
You can disable internal PhoenixMiner watchdog by adding to Extra config arguments Code:
-wdog 0
Can someone explain how to automatically apply desired overclocking on reboot?
So far I have to put all these settings in the miner config, overclocking via HiveOS interface does not stick between reboots
You can join to to Hive Support Channel at Telegram - https://t.me/hiveoschat_enSo far I have to put all these settings in the miner config, overclocking via HiveOS interface does not stick between reboots
Also you can ask for help via email [email protected]
Can someone explain how to automatically apply desired overclocking on reboot?
So far I have to put all these settings in the miner config, overclocking via HiveOS interface does not stick between reboots
So far I have to put all these settings in the miner config, overclocking via HiveOS interface does not stick between reboots
I'm trying HiveOS atm
Claymore 15.0 works fine oob
Phoenixminer crashes and then system reboots
Can I disable automatic reboot after miner crash?
And any info how to manually run phoenixminer in order to troubleshoot?
PS: made it work
It seems default settings are not good for 4GB cards
Claymore 15.0 works fine oob
Phoenixminer crashes and then system reboots
Can I disable automatic reboot after miner crash?
And any info how to manually run phoenixminer in order to troubleshoot?
PS: made it work
It seems default settings are not good for 4GB cards
0.6-155@200828 🐧
What's new?
SYSTEM🖥
⚙️ Improved software watchdog (improved lost GPU detection, improved error messages)
⚙️ Improved gpu-detect tool (AMD GPU memory size reading improvement on newer Linux kernels and AMD drivers)
MINERS👷♂️
⛏ XMRig v6.3.3 (improved CUDA loader error reporting and fixed plugin load, bug fixes)
⛏ XMRig-Klaro v5.6.0 (based on original code XMRig v5.6.0 to mine KLARO coin on RandomXHPFI; select fork 'klaro' under 'xmrig-new')
What's new?
SYSTEM🖥
⚙️ Improved software watchdog (improved lost GPU detection, improved error messages)
⚙️ Improved gpu-detect tool (AMD GPU memory size reading improvement on newer Linux kernels and AMD drivers)
MINERS👷♂️
⛏ XMRig v6.3.3 (improved CUDA loader error reporting and fixed plugin load, bug fixes)
⛏ XMRig-Klaro v5.6.0 (based on original code XMRig v5.6.0 to mine KLARO coin on RandomXHPFI; select fork 'klaro' under 'xmrig-new')
0.6-154@200825 🐧
What's new?
SYSTEM 🖥
⚙️ Fixed amdmeminfo tool (fixed trimming BIOS info message on some custom BIOSes)
⚙️ Added CUDA 11.0 RTL (supported by new builds of some miners on 450.x series Nvidia drivers)
What's new?
SYSTEM 🖥
⚙️ Fixed amdmeminfo tool (fixed trimming BIOS info message on some custom BIOSes)
⚙️ Added CUDA 11.0 RTL (supported by new builds of some miners on 450.x series Nvidia drivers)
I've read about the issues with Asus B250 ME and I also have them. I have 11 AMD rx and 2 Nvidia 1060 which worked perfectly with windows 10 for 2 years. Until windows died beyond repair. I managed to run simple mining OS with all 11 AMD's with no issues. My LA is 0.30-0.50, Bios v. 1001. When I decided to check the Hive OS, I got AMD OC failed on the first card and the rig didn't even start. Is there a chance to be able to run simultaneously AMD's and Nvidia's? I've read about this fix: updating MB Bios, Advanced\PCH Configuration\PCI Express Configuration -> PCIe Speed -> Gen 2, Advanced\System Agent (SA) Configuration\PEG Port Configuration -> PCIEX16_1 Link Speed -> Gen 2. I guess this will fix the issue if I mine only with AMD's, but will the OC work for mixed AMD and Nvidia after that with a normal LA? My flight sheets are adjusted to work with 2 different miners for AMD's and Nvidia's, respectively, and each GPU is OC'ed individually. Plus I have the option to use the OC commands of the miners, in case the OC template is not working.
0.6-153@200821 🐧
What's new?
SYSTEM 🖥
⚙️ Fixed nvidia-driver-update tool (fixed start with empty cmd line)
MINERS👷♂️
⛏ NanoMiner v1.10.1 (Nvidia KawPoW (Ravencoin) improvements: better hashrate, less memory consumption)
⛏ lolMiner v1.07 (added support for mining Cuckoo 29 (Aeternity - use C29AE) on 6G+ cards, added support ItaloCoin hardfork for mining on Cuckaroo 29-48 (cuckaroo29i) on 6G+ cards, minor cosmetic fixes)
⛏ XMRig v6.3.2 Release (more robust 1 GB pages handling, updated CUDA plugin to v6.3.1)
What's new?
SYSTEM 🖥
⚙️ Fixed nvidia-driver-update tool (fixed start with empty cmd line)
MINERS👷♂️
⛏ NanoMiner v1.10.1 (Nvidia KawPoW (Ravencoin) improvements: better hashrate, less memory consumption)
⛏ lolMiner v1.07 (added support for mining Cuckoo 29 (Aeternity - use C29AE) on 6G+ cards, added support ItaloCoin hardfork for mining on Cuckaroo 29-48 (cuckaroo29i) on 6G+ cards, minor cosmetic fixes)
⛏ XMRig v6.3.2 Release (more robust 1 GB pages handling, updated CUDA plugin to v6.3.1)
0.6-152@200819 🐧
What's new?
SYSTEM 🖥
⚙️ Improved nvidia-driver-update tool (added -f | --force option to bypass some DKMS build errors during install; Tesla driver can be installed by providing appropriate version, ie 440.95.01)
⚙️ Improved amdmeminfo tool (improved Navi support; fixed BIOS version detection on some brands i.e. MSI, Gigabyte; speed up to 10x on some systems; bugfixes and stability improvements)
🐞 Fixed GPU stats for motherboards with some AMD iGPU (i.e. AMD "Wani")
🐞 Fixed autofan for critical temp and action (minimal critical temp can be set as target+10° vs 20° as was before; in some rare cases mining was not resumed after stop on critical temp)
MINERS👷♂️
⛏ T-Rex v0.16.1 (add memory tweaks for GDDR5 and GDDR5X cards on Pascal 10xx cards, faster DAG generation on kawpow and progpow)
⛏ Bminer v16.3.0 (support 6G cards for the Cuckatoo32, initial support for ETH mining on AMD Navi, fix compatibility issues when mining ETH on 4G cards)
⛏ XMRigCC v2.8.0 as XMRig for CPU fork (integrated Randomx variant "Panthera" used by Scala[XLA] algo)
What's new?
SYSTEM 🖥
⚙️ Improved nvidia-driver-update tool (added -f | --force option to bypass some DKMS build errors during install; Tesla driver can be installed by providing appropriate version, ie 440.95.01)
⚙️ Improved amdmeminfo tool (improved Navi support; fixed BIOS version detection on some brands i.e. MSI, Gigabyte; speed up to 10x on some systems; bugfixes and stability improvements)
🐞 Fixed GPU stats for motherboards with some AMD iGPU (i.e. AMD "Wani")
🐞 Fixed autofan for critical temp and action (minimal critical temp can be set as target+10° vs 20° as was before; in some rare cases mining was not resumed after stop on critical temp)
MINERS👷♂️
⛏ T-Rex v0.16.1 (add memory tweaks for GDDR5 and GDDR5X cards on Pascal 10xx cards, faster DAG generation on kawpow and progpow)
⛏ Bminer v16.3.0 (support 6G cards for the Cuckatoo32, initial support for ETH mining on AMD Navi, fix compatibility issues when mining ETH on 4G cards)
⛏ XMRigCC v2.8.0 as XMRig for CPU fork (integrated Randomx variant "Panthera" used by Scala[XLA] algo)
Windows boot no matter CSM Support: Disabled or Enabled.
The HiveOS doesnt boot if I set CSM Support: Disabled.
The HiveOS boots if I set CSM Support: Enabled.
***
WHY Disable Internal Graphics ?
I always use enabled internal graphics and put the monitor onboard display out.
My all of the HiveOS rigs are on the same. But no any error.
is there any benefit to disable it ?
0.6-150@200801 🐧
What's new?
MINERS👷♂️
⛏ XMRig v6.3.1 (added command line options '--randomx-cache-qos' and '--argon2-impl')
⛏ TeamRedMiner v0.7.9 (fixes for mixed OpenCL rigs, added '--eth_epoch' argument for easier epoch testing; added '--eth_aggr_mode' for automatic aggressive 'B' mode on Polaris 8GB gpus; added '--watchdog_disable' argument)
What's new?
MINERS👷♂️
⛏ XMRig v6.3.1 (added command line options '--randomx-cache-qos' and '--argon2-impl')
⛏ TeamRedMiner v0.7.9 (fixes for mixed OpenCL rigs, added '--eth_epoch' argument for easier epoch testing; added '--eth_aggr_mode' for automatic aggressive 'B' mode on Polaris 8GB gpus; added '--watchdog_disable' argument)
Hi;
I have running 31 rigs with NVIDIA GPUs on HiveOS.
I have running 25 rigs with AMD on Windows. And I switched 2 pcs AMD rigs to HiveOS. It's so good.
I want to switch all of AMD rigs to HiveOS. But there is a problem.
I have ESonic Gladiator 12GPU motherboards and Biostar TB250-BTC PRO 12GPU motherboards.
No problem with NVIDIA on both of the motherboards.
There is no problem with AMD on Biostar TB250-BTC PRO 12GPU motherboards.
There is a problem with AMD on ESonic Gladiator 12GPU motherboards.
This problem is only on HiveOS. There is no any problem on Windows. I only change SSD.
Please check the image and tell me what should i do ?
https://i.imgur.com/SfIkEmQ.jpg
https://i.imgur.com/SfIkEmQ.jpg
I have running 31 rigs with NVIDIA GPUs on HiveOS.
I have running 25 rigs with AMD on Windows. And I switched 2 pcs AMD rigs to HiveOS. It's so good.
I want to switch all of AMD rigs to HiveOS. But there is a problem.
I have ESonic Gladiator 12GPU motherboards and Biostar TB250-BTC PRO 12GPU motherboards.
No problem with NVIDIA on both of the motherboards.
There is no problem with AMD on Biostar TB250-BTC PRO 12GPU motherboards.
There is a problem with AMD on ESonic Gladiator 12GPU motherboards.
This problem is only on HiveOS. There is no any problem on Windows. I only change SSD.
Please check the image and tell me what should i do ?
https://i.imgur.com/SfIkEmQ.jpg
https://i.imgur.com/SfIkEmQ.jpg
Looks like its affecting GPU on PCI Bus 01:00
https://i.imgur.com/mD3aNTT.png
This generally points to bad risers/cables or bad BIOS, but since you claim it works on Windows (even if Windows doesn't always pick up on same errors), I'd start by ensuring your motherboard BIOS is set accordingly fist.
Reset BIOS to factory defaults and ensure only the following changes are made;
Set PCIe Link Speed to GEN2
Disable Internal Graphics
Enable Above 4G Decoding
CSM Support: Disabled
Set storage device with hive partition as first in boot priority
(Optional) Restore AC Power Loss (Power On)
Hi;
I have running 31 rigs with NVIDIA GPUs on HiveOS.
I have running 25 rigs with AMD on Windows. And I switched 2 pcs AMD rigs to HiveOS. It's so good.
I want to switch all of AMD rigs to HiveOS. But there is a problem.
I have ESonic Gladiator 12GPU motherboards and Biostar TB250-BTC PRO 12GPU motherboards.
No problem with NVIDIA on both of the motherboards.
There is no problem with AMD on Biostar TB250-BTC PRO 12GPU motherboards.
There is a problem with AMD on ESonic Gladiator 12GPU motherboards.
This problem is only on HiveOS. There is no any problem on Windows. I only change SSD.
Please check the image and tell me what should i do ?
https://i.imgur.com/SfIkEmQ.jpg
I have running 31 rigs with NVIDIA GPUs on HiveOS.
I have running 25 rigs with AMD on Windows. And I switched 2 pcs AMD rigs to HiveOS. It's so good.
I want to switch all of AMD rigs to HiveOS. But there is a problem.
I have ESonic Gladiator 12GPU motherboards and Biostar TB250-BTC PRO 12GPU motherboards.
No problem with NVIDIA on both of the motherboards.
There is no problem with AMD on Biostar TB250-BTC PRO 12GPU motherboards.
There is a problem with AMD on ESonic Gladiator 12GPU motherboards.
This problem is only on HiveOS. There is no any problem on Windows. I only change SSD.
Please check the image and tell me what should i do ?
https://i.imgur.com/SfIkEmQ.jpg
0.6-150@200729 🐧
What's new?
SYSTEM 🖥
⚙️ Improved Autofan module (added as a secondary target temperature Tmem for AMD Vega and Navi GPUs; added a new mode "Smart Mode")**
⚙️ Updated some system libs
MINERS👷♂️
⛏ Bminer v16.2.12 (improved Cuckaroo29z performance)
What's new?
SYSTEM 🖥
⚙️ Improved Autofan module (added as a secondary target temperature Tmem for AMD Vega and Navi GPUs; added a new mode "Smart Mode")**
⚙️ Updated some system libs
MINERS👷♂️
⛏ Bminer v16.2.12 (improved Cuckaroo29z performance)
The Hive OS platform has become multilingual! 🎉
🌍 Great news for our Russian speaking users 🗣
We have translated the websites of the Hive OS operating system and Hiveon ASIC firmware. Now they are available not only in English, but also in Russian.
✔️ The Hive OS website in Russian and English
✔️ The Hiveon ASIC website in Russian and English
Also pay attention to our extensive knowledge base. All the essential guides, manuals and instructions are also available in Russian and English
📈 And we are not going to stop! The next step is to translate the Hiveon Pool website.
And since language localization has become technically easier and faster, our platform will soon "speak" many other languages as well — stay tuned for our updates on
👨🚀🚀🌕
0.6-149@200723 🐧
What's new?
MINERS👷♂️
⛏ Gminer v2.20 (improved Cuckarooz29 algorithm on RTX cards)
⛏ PhoenixMiner v5.1c (added more Pascal-based Nvidia cards to the list of supported Nvidia cards for memory timings; added new parameter '-nvmem' to force using straps even on unsupported Nvidia GPUs: use '-nvmem 1' for GDDR5 cards, or '-nvmem 2' for GDDR5X cards; removed some dead ethash-based altcoins and updated the support for the rest of them; other small fixes)
What's new?
MINERS👷♂️
⛏ Gminer v2.20 (improved Cuckarooz29 algorithm on RTX cards)
⛏ PhoenixMiner v5.1c (added more Pascal-based Nvidia cards to the list of supported Nvidia cards for memory timings; added new parameter '-nvmem' to force using straps even on unsupported Nvidia GPUs: use '-nvmem 1' for GDDR5 cards, or '-nvmem 2' for GDDR5X cards; removed some dead ethash-based altcoins and updated the support for the rest of them; other small fixes)
0.6-149@200722 🐧
What's new?
SYSTEM 🖥
⚙️ Improved autofan module (reworked AMD fan control)
⚙️ Fixed applying pill on some early GTX 1080 (implemented a special Nvidia pill applying procedure for some early versions of GTX 1080 PCBs)
MINERS👷♂️
⛏ Bminer v16.2.11 (improved Cuckarooz29 algorithm; more fixes on fidelity issues for GRIN)
⛏ miniZ v1.6v5 (fixed some issues of previous version)
What's new?
SYSTEM 🖥
⚙️ Improved autofan module (reworked AMD fan control)
⚙️ Fixed applying pill on some early GTX 1080 (implemented a special Nvidia pill applying procedure for some early versions of GTX 1080 PCBs)
MINERS👷♂️
⛏ Bminer v16.2.11 (improved Cuckarooz29 algorithm; more fixes on fidelity issues for GRIN)
⛏ miniZ v1.6v5 (fixed some issues of previous version)
0.6-148@200721 🐧
What's new?
SYSTEM 🖥
⚙️ Improved network stability
MINERS👷♂️
⛏ Bminer v16.2.10 (improved Cuckarooz29 algorithm; fixed fidelity issues for GRIN)
⛏ miniZ v1.6v4 (structural software improvements: size < 16Mb; speed improvements for BeamHashIII; fixed invalid shares on AION/F2Pool; faster feedback on miniZ start; fixed some more stability issues that caused unusual random crashes)
⛏ TeamRedMiner v0.7.8.1 test (added support mixed AMD OpenCL platforms: legacy and pal)
⛏ T-Rex v0.15.9 test (added memory tweaks for GDDR5 and GDDR5X 10xx series cards)
What's new?
SYSTEM 🖥
⚙️ Improved network stability
MINERS👷♂️
⛏ Bminer v16.2.10 (improved Cuckarooz29 algorithm; fixed fidelity issues for GRIN)
⛏ miniZ v1.6v4 (structural software improvements: size < 16Mb; speed improvements for BeamHashIII; fixed invalid shares on AION/F2Pool; faster feedback on miniZ start; fixed some more stability issues that caused unusual random crashes)
⛏ TeamRedMiner v0.7.8.1 test (added support mixed AMD OpenCL platforms: legacy and pal)
⛏ T-Rex v0.15.9 test (added memory tweaks for GDDR5 and GDDR5X 10xx series cards)
Jump to: