0.6-177@201123 🐧
What's new?
SYSTEM 🖥
⚙️ Improved hpkg tool (new options to check and fix broken packages)
⚙️ Improved hugepages tool (added Zen3 MSR mod)
MINERS👷♂️
⛏ PhoenixMiner v5.2e (fixed some problems with using 8GB AMD cards; fixed some problems with 4GB AMD cards when mining ETH or ETC)
⛏ lolMiner v1.16a (added initial support of Ethash and Beam Hash III for RX 6000 generation of GPUs, all supported algorithms now show the share difficulty and have best share statistics, many other new features and bug fixes)
⛏ NBMiner v33.7 (add an option -no-interrupt, set this option will disable miner interrupting current GPU jobs when a new job coming from pool, will cause less power supply issue, but might lead to a bit higher stale ratio and reject shares; add efficiency display in console, showing hashrate per watt for each GPU)
⛏ SGMiner-fancyIX v5.6.1.3.b7b - 0.7.1 release (yescrypt algo: added optimized binary kernels for rx 580 and Vega cards, 30% ~ 37% faster, added GCN cross lane instructions in Navi kernel, over 3x faster)
⛏ XMRig v6.6.0 (improved miner benchmark mode)
Topic: Hiveon. №1 OS for mining - page 22. (Read 80804 times)
Kernel 5.6.0-200909-hiveos-beta, OpenCL 19.30, so it is Beta3
Do stable work with Navi GPUs?
Do stable work with Navi GPUs?
Using 0.6-157@200908
This is GPU client version. Please, pay attention to the name of the Linux kernel and the version number of the installed AMD driver.Do we have a new version for Navi GPUs?
Stable Image based on Linux kernel 5.0.21 + AMD drivers 20.30Different Betas - Beta2 (Linux kernel 5.0.21 + AMD drivers 19.30), Beta3 (Linux kernel 5.6 + AMD drivers 19.30)
Also, we have a new image but it's currently available only for closed testing
@dimafern
Using 0.6-157@200908, with 5600xt GPUs, phoenixminer 5.2c. When I change overclock settings, a random GPU freezes and the miner continues with it. I think the miner should be stopped before applying new overclock settings.
Do we have a new version for Navi GPUs?
Thanks
Using 0.6-157@200908, with 5600xt GPUs, phoenixminer 5.2c. When I change overclock settings, a random GPU freezes and the miner continues with it. I think the miner should be stopped before applying new overclock settings.
Do we have a new version for Navi GPUs?
Thanks
In hiveos in overclock section there is a tref parameter that you set to 20 or 30 that does the same or similar thing without using rx boost
Thanks, but for some reason I'm not seeing it. Probably because I'm using an old Beta version on all of my machines (some have 5700xt cards).
Do the non-beta versions support the 5700 cards yet?
I'm currently on 0.6-140@200519
UPDATE:
Went ahead and upgraded to 0.6-176@201121 without any issues but still can't do tref or amdmemtweak. I'm guessing the Navi cards aren't supported?
0.6-176@201121 🐧
What's new?
SYSTEM
⚙️ Updated system tools for upcoming support AMD RX 6800/6900 series
MINERS👷♂️
⛏ NanoMiner v3.1.1 (minor fixes)
⛏ T-Rex v0.18.11 (bug fixes: can't pair device with KEY error; display GPU names when NVML library can't be loaded or disabled)
⛏ NBMiner v33.5 (improved hashrate: +90% on 16 20 30 series Nvidia GPUs, at least +100% on all other GPUs)
⛏ NBMiner v33.6 (improved octopus hashrate: +10% on 16 20 30 series Nvidia GPUs, 27.5M on 1660s; Notes: to get best results on octopus since this version, GPUs that has higher core performance than memory performance, need to overclock memory to get higher hashrate, e.g. 2080, 3070)
What's new?
SYSTEM
⚙️ Updated system tools for upcoming support AMD RX 6800/6900 series
MINERS👷♂️
⛏ NanoMiner v3.1.1 (minor fixes)
⛏ T-Rex v0.18.11 (bug fixes: can't pair device with KEY error; display GPU names when NVML library can't be loaded or disabled)
⛏ NBMiner v33.5 (improved hashrate: +90% on 16 20 30 series Nvidia GPUs, at least +100% on all other GPUs)
⛏ NBMiner v33.6 (improved octopus hashrate: +10% on 16 20 30 series Nvidia GPUs, 27.5M on 1660s; Notes: to get best results on octopus since this version, GPUs that has higher core performance than memory performance, need to overclock memory to get higher hashrate, e.g. 2080, 3070)
In hiveos in overclock section there is a tref parameter that you set to 20 or 30 that does the same or similar thing without using rx boost
So I tried to use the new PhoenixMiner (5.2d) on HiveOS and included the -rxboost command and it's saying, "unable to set straps You have to run PhoenixMiner as administrator to set straps."
I'm embarrassed to ask this... but how do we run the software as administrator?
I stopped the miner, then entered "su" then ran the "miner start" command but it's still saying that I need to run as administrator.
Or maybe this is a PhoenixMiner (Linux) bug?
Thanks!
I'm embarrassed to ask this... but how do we run the software as administrator?
I stopped the miner, then entered "su" then ran the "miner start" command but it's still saying that I need to run as administrator.
Or maybe this is a PhoenixMiner (Linux) bug?
Thanks!
0.6-175@201120 🐧
What's new?
MINERS👷♂️
⛏ NanoMiner v3.1.0 (performance improvements of Octopus algorithm on Nvidia GPUs, approx.: +4% on 10xx series, +18% on 16xx and 20xx series, +24% on 30xx series; added Verushash algorithm for VerusCoin support on CPUs with PCLMUL, AES and AVX hardware instructions; added initial support for new AMD RX 6800, 6800 XT and 6900 XT GPUs on Ethash and KawPoW algorithms)
⛏ T-Rex v0.18.10 (added optional no-strict-ssl parameter to disable certificate validation for SSL connections; changed fork-at parameter syntax for upcoming ETC hardfork)
What's new?
MINERS👷♂️
⛏ NanoMiner v3.1.0 (performance improvements of Octopus algorithm on Nvidia GPUs, approx.: +4% on 10xx series, +18% on 16xx and 20xx series, +24% on 30xx series; added Verushash algorithm for VerusCoin support on CPUs with PCLMUL, AES and AVX hardware instructions; added initial support for new AMD RX 6800, 6800 XT and 6900 XT GPUs on Ethash and KawPoW algorithms)
⛏ T-Rex v0.18.10 (added optional no-strict-ssl parameter to disable certificate validation for SSL connections; changed fork-at parameter syntax for upcoming ETC hardfork)
0.6-175@201119 🐧
What's new?
MINERS👷♂️
⛏ NanoMiner v3.0.1 (added dagSer option to serialize DAG generation on Octopus, Ethash and KawPoW algorithms)
⛏ XMRigCC 2.8.4 - XMRig fork (added cn variant CXCHE algo 'cn/cache_hash'; added latest MSR improvements for Ryzen Zen 2/3 based CPUs when mining randomx algos)
What's new?
MINERS👷♂️
⛏ NanoMiner v3.0.1 (added dagSer option to serialize DAG generation on Octopus, Ethash and KawPoW algorithms)
⛏ XMRigCC 2.8.4 - XMRig fork (added cn variant CXCHE algo 'cn/cache_hash'; added latest MSR improvements for Ryzen Zen 2/3 based CPUs when mining randomx algos)
This Pool seems offline - no mined blocks for 15 hours. Whats going on here?
0.6-175@201118 🐧
What's new?
SYSTEM 🖥
⚙️ Updated hive-replace tool (safe mode now used by default)
⚙️ Improved update procedure for hardware IDs
MINERS👷♂️
⛏ PhoenixMiner 5.2d (added new -daglim parameter to allow a few more weeks mine ETH on AMD GPUs with 4GB VRAM after 4GB DAG size exceeded; added -rxboost parameter to boost the performance of GDDR5 based AMD cards; added memory straps support for AMD Vega cards, use -straps command-line option where -strap 1 lower level; AMD GPUs with >4GB RAM will now work without issues until DAG epoch 450; Nvidia memory timing (straps) option is improved and now is turned off during DAG generation to avoid any possible instability issues; option '-dagrestart' is set to 1 whenever '-daglimit' is active for 4GB AMD cards; added new kernels for 4GB AMD cards with higher hashrate when -daglim is in effect; many other improvements and fixes. Please refer to the miner's manual for a complete description of the new options.)
What's new?
SYSTEM 🖥
⚙️ Updated hive-replace tool (safe mode now used by default)
⚙️ Improved update procedure for hardware IDs
MINERS👷♂️
⛏ PhoenixMiner 5.2d (added new -daglim parameter to allow a few more weeks mine ETH on AMD GPUs with 4GB VRAM after 4GB DAG size exceeded; added -rxboost parameter to boost the performance of GDDR5 based AMD cards; added memory straps support for AMD Vega cards, use -straps command-line option where -strap 1 lower level; AMD GPUs with >4GB RAM will now work without issues until DAG epoch 450; Nvidia memory timing (straps) option is improved and now is turned off during DAG generation to avoid any possible instability issues; option '-dagrestart' is set to 1 whenever '-daglimit' is active for 4GB AMD cards; added new kernels for 4GB AMD cards with higher hashrate when -daglim is in effect; many other improvements and fixes. Please refer to the miner's manual for a complete description of the new options.)
0.6-174@201116 🐧
What's new?
MINERS👷♂️
⛏ NanoMiner v3.0.0 (8% performance increase on Nvidia 10xx series GPUs on Octopus algorithm; added support RTX 30xx Ampere as separate build, it can be selected in the miner configuration settings - Octopus (Conflux) performance is 38 MH/s on stock 3070; Ethash and KawPow also supported)
⛏ CPUminer-Opt-JayDDee v3.15.2 (small fixes and optimization)
What's new?
MINERS👷♂️
⛏ NanoMiner v3.0.0 (8% performance increase on Nvidia 10xx series GPUs on Octopus algorithm; added support RTX 30xx Ampere as separate build, it can be selected in the miner configuration settings - Octopus (Conflux) performance is 38 MH/s on stock 3070; Ethash and KawPow also supported)
⛏ CPUminer-Opt-JayDDee v3.15.2 (small fixes and optimization)
0.6-174@201115 🐧
What's new?
MINERS👷♂️
⛏ T-Rex 0.18.9 (increased ethash pool side hashrate by 1-2% by reducing the amount of stale shares the miner drops before sending to the pool; set worker name to %hostname% if not specified on ethash, kawpow, progpow; bug fix: low pool side hashrate when mining ETH+ZIL due to incorrect difficulty parsing; bux fix: miner crashes on low RAM multi-GPU rigs during DAG rebuild on ethash, kawpow, progpow)
⛏ XMRig v6.5.3 + CUDA plugin v6.5.0 (fixed MSR mod names in JSON API; CUDA plugin: fixed high CPU usage on Cryptonight and AstroBWT)
⛏ SGminer-fancyIX v5.6.1.3.b7a / 0.7.0 release (added over 10x faster yescrypt kernel; added Navi support for yescrypt)
⛏ Gminer v2.30 (major performance improvements for BeamHashIII up to +2-3% dependent on GPU; added support Etchash algorithm for Ethereum classic algorithm after hardfork; significantly reduced stale shares percentage on Ethash algorithm, it will improve hashrate on pool side; added AMD solvers for Ethash and Etchash; reduced memory usage for Cortex 8GB solver ~about 50MB)
⛏ Bminer v16.3.6 (improved the performance of the Conflux miner; fixed compatibilities issues of various Conflux pools)
⛏ miniZ v1.6w4 (added '-cden' option to exclude GPUs from mining based on their name; CUDA 11 build: improved performance for RTX 30XX cards on some algos; fixed Beam, Zel, Aion, 144/5)
What's new?
MINERS👷♂️
⛏ T-Rex 0.18.9 (increased ethash pool side hashrate by 1-2% by reducing the amount of stale shares the miner drops before sending to the pool; set worker name to %hostname% if not specified on ethash, kawpow, progpow; bug fix: low pool side hashrate when mining ETH+ZIL due to incorrect difficulty parsing; bux fix: miner crashes on low RAM multi-GPU rigs during DAG rebuild on ethash, kawpow, progpow)
⛏ XMRig v6.5.3 + CUDA plugin v6.5.0 (fixed MSR mod names in JSON API; CUDA plugin: fixed high CPU usage on Cryptonight and AstroBWT)
⛏ SGminer-fancyIX v5.6.1.3.b7a / 0.7.0 release (added over 10x faster yescrypt kernel; added Navi support for yescrypt)
⛏ Gminer v2.30 (major performance improvements for BeamHashIII up to +2-3% dependent on GPU; added support Etchash algorithm for Ethereum classic algorithm after hardfork; significantly reduced stale shares percentage on Ethash algorithm, it will improve hashrate on pool side; added AMD solvers for Ethash and Etchash; reduced memory usage for Cortex 8GB solver ~about 50MB)
⛏ Bminer v16.3.6 (improved the performance of the Conflux miner; fixed compatibilities issues of various Conflux pools)
⛏ miniZ v1.6w4 (added '-cden' option to exclude GPUs from mining based on their name; CUDA 11 build: improved performance for RTX 30XX cards on some algos; fixed Beam, Zel, Aion, 144/5)
0.6-174@201114 🐧
What's new?
MINERS👷♂️
⛏ NanoMiner v1.13.1 (significantly improved performance of octopus (Conflux) algorithm on Nvidia: +96% up to 4.5 MH/s on stock p106, +139% up to 22.7 MH/s on stock 2060; support RTX 30xx (Ampere) will be added in next releases)
🎡 Added/updated pool templates for mining CFX (Conflux Network). You can choose from poolflare, beepool, 666pool, f2pool, woolypooly.
What's new?
MINERS👷♂️
⛏ NanoMiner v1.13.1 (significantly improved performance of octopus (Conflux) algorithm on Nvidia: +96% up to 4.5 MH/s on stock p106, +139% up to 22.7 MH/s on stock 2060; support RTX 30xx (Ampere) will be added in next releases)
🎡 Added/updated pool templates for mining CFX (Conflux Network). You can choose from poolflare, beepool, 666pool, f2pool, woolypooly.
0.6-174@201113 🐧
What's new?
MINERS👷♂️
⛏ lolMiner v1.15 (fixed invalid shares on 4G cards on some systems; fixed hangs up when changing epoch when using the ZIL cache feature; fixed sometimes produced invalid shares when a new job with different epoch arrives while the miner is currently creating the DAG file for an earlier job; fixed emergency scripts when a GPU was hung up; improved Ethash efficiency on Nvidia GPUs; general stability improvements)
⛏ XMRig v6.5.2 (separate MSR mod for Zen/Zen2 and Zen3)
What's new?
MINERS👷♂️
⛏ lolMiner v1.15 (fixed invalid shares on 4G cards on some systems; fixed hangs up when changing epoch when using the ZIL cache feature; fixed sometimes produced invalid shares when a new job with different epoch arrives while the miner is currently creating the DAG file for an earlier job; fixed emergency scripts when a GPU was hung up; improved Ethash efficiency on Nvidia GPUs; general stability improvements)
⛏ XMRig v6.5.2 (separate MSR mod for Zen/Zen2 and Zen3)
0.6-174@201112-2 🐧
What's new?
MINERS👷♂️
⛏ lolMiner v1.14 (added Ethash Zombie mode for 4G Nvidia GPUs. Use --4g-alloc-size to calibrate the number of MBytes the GPUs are allowed to use; fixed a segmentation fault on Nvidia & mixed rigs when starting Ethash mining)
What's new?
MINERS👷♂️
⛏ lolMiner v1.14 (added Ethash Zombie mode for 4G Nvidia GPUs. Use --4g-alloc-size to calibrate the number of MBytes the GPUs are allowed to use; fixed a segmentation fault on Nvidia & mixed rigs when starting Ethash mining)
0.6-174@201112 🐧
What's new?
MINERS👷♂️
⛏ lolMiner v1.13 (Ethash:reduced power draw significantly on non-zombie mode for Rx Fury & Rx 470 - 590, slight reduction for Vega & Navi; Slightly improved performance on Vega, Navi and Nvidia GPUs; improved Nicehash+ZIL mode; other bug fixes & improvements)
⛏ T-Rex v0.18.8 (added etchash for upcoming ETC hardfork; fixed compatibility with MRR service)
⛏ NBMiner v33.4 (improved octopus hashrate: +35% on 16 20 30 series Nvidia GPUs, +20% on all other GPUs; added 'etchash' for upcoming ETC hardfork; added effective pool hashrate on console & API, 10min 4h 24h)
What's new?
MINERS👷♂️
⛏ lolMiner v1.13 (Ethash:reduced power draw significantly on non-zombie mode for Rx Fury & Rx 470 - 590, slight reduction for Vega & Navi; Slightly improved performance on Vega, Navi and Nvidia GPUs; improved Nicehash+ZIL mode; other bug fixes & improvements)
⛏ T-Rex v0.18.8 (added etchash for upcoming ETC hardfork; fixed compatibility with MRR service)
⛏ NBMiner v33.4 (improved octopus hashrate: +35% on 16 20 30 series Nvidia GPUs, +20% on all other GPUs; added 'etchash' for upcoming ETC hardfork; added effective pool hashrate on console & API, 10min 4h 24h)
Jump to: