Hiveon. №1 OS for mining - page 38.

yuzmemak

newbie

Activity: 9

Merit: 0

Quote from: yuzmemak on July 04, 2019, 12:40:40 PM

Hi,

I wanted to test hive os with one of my assus b250 rig. Which has nvdia and mad cards. For nvdia works fine. But I am not able to control amd cards. Allways receive amd overclock failed message and some rx570 cards works only 5 mhs. When chech amd-info works very slow and shows only 300 mhz. But at the same rig, I can control nvidia cards without issue.

I hope sone one help me.

I think hiveos user numbers quite low. Last 12 hours no body reply. Or I am the first one who is receiving "amd overclock failed" error.

I tred debug myself but I couldn't find amd config file location. If I find, I have no idea, how this file loaded when booting.

Lets wait, may be developer answer.

dimafern

member

Activity: 577

Merit: 27

0.6-56@190705
What's new?
* Gminer v1.50 (fixed performance regression for BEAM)
* CryptoDredge v0.20.2 (improved argon2d-nim, improved x16-like algos, bug fixes)

yuzmemak

newbie

Activity: 9

Merit: 0

Hi,

I wanted to test hive os with one of my assus b250 rig. Which has nvdia and mad cards. For nvdia works fine. But I am not able to control amd cards. Allways receive amd overclock failed message and some rx570 cards works only 5 mhs. When chech amd-info works very slow and shows only 300 mhz. But at the same rig, I can control nvidia cards without issue.

I hope sone one help me.

dimafern

member

Activity: 577

Merit: 27

0.6-56@190704
* Gminer v1.49 (fixed bug in v1.48 with Beam mining on GTX 1060 3GB, improved in v1.48 performance for EQ 150/5 and EQ 125/4 algorithms on RTX cards)
* TeamRedMiner v0.5.3 (added support of MTP algo, small stabilization fixes for CN variants)
* miniZ - fixed config generation

vigicorsaire

newbie

Activity: 5

Merit: 0

Hello fellow miners

I try to create a Mining rig on Hiveos.

I think I do good but something goes wrong and I cannot mine,
could you help me?

I go some screens on my front, please click and tell me what you think.

https://www.noelshack.com/2019-27-3-1562175567-onitoring111.png

https://www.noelshack.com/2019-27-3-1562175567-onitoring222.png

https://www.noelshack.com/2019-27-3-1562175567-onitoring111.png

Thank you

dimafern

member

Activity: 577

Merit: 27

0.6-56@190703
* fixed `nvidia-info` tool (added current PL and fixed displaying default PL)
* nanominer v1.4.1 (fixed SSL connection with miningpoolhub, fixed calling amdmemtweaktool)
* NEW SeroMiner v0.3.0 (as ethminer fork)
* miniZ v1.4o (added support for 125/4 and added for testing 210/9)
* CPUminer-opt v3.9.5.1 (improved log color scheme)
* lolMiner v0.8.3 (added 16 GByte solver for Cuckatoo31)
* CCminer-djm34 v1.1.23 (stability improvement)
* T-Rex v0.12.1 (improved MTP by 1-3% on some cards)
* Gminer - fixed broken stats on some systems

geoteo

newbie

Activity: 11

Merit: 0

Quote from: Johny101010 on June 26, 2019, 01:29:52 PM

Quote from: TiasJ on June 26, 2019, 11:53:33 AM

Quote from: Johny101010 on June 25, 2019, 06:15:50 PM

I'm having a problem with 1 set of rigs.
They are all AMD 12 gpu rigs with 4gig of ram and Celeron cpu on ASUS B250 expert MoBo. When they are rebooted the load skyrockets and slows the rig to a stop. If I unplug them they work normally at start, until they reboot again.
This does not happen on my 6 rigs on the a Biostar tb 250 with everything else the same.
Anyone has any idea why? Any suggestions?

This is a known issue with these boards. We're currently awaiting feedback from ASUS on the matter, but, we think it may be related to BIOS version. Anything above vers. 120x has this issue.
Boards with 1001 up to 1010 don't seem to be affected.

Thing is, you won't be able to rollback since they've ME locked it.

Please check your BIOS version and report back so I can send as much data to their guys testing this.

Thanks!

I'm on Version 1206 on all I think.

I run the same B250 board with 14 vegas and I have no problems unless I update Hive. Try reinstalling hive and do not update it, stay on version 0.6-01.

dimafern

member

Activity: 577

Merit: 27

0.6-55@190626
What's new?
* nanominer v1.4.0 (added 'memTweak' option to control AMD GPU memory timings on Ethash algo, faster Ethash kernel on Vega/VII GPU)
* Sushi Miner CUDA v2.1.1 (hashrate improvement and minor bugfixes)
* CPUminer-opt v3.9.5 (new share reporting information scheme)
* lolMiner v0.8.2 (added support for ZelHash for upcoming July 02 hardfork of ZEL)
* CCminer-djm34 v1.1.22 (solved issue which were causing lost of connection and/or connection with pool)
* WildRig-Multi v0.17.9 (fixed blake2b family, wildkeccak around 1% speed increase)

Johny101010

full member

Activity: 218

Merit: 100

Quote from: TiasJ on June 26, 2019, 11:53:33 AM

Quote from: Johny101010 on June 25, 2019, 06:15:50 PM

I'm having a problem with 1 set of rigs.
They are all AMD 12 gpu rigs with 4gig of ram and Celeron cpu on ASUS B250 expert MoBo. When they are rebooted the load skyrockets and slows the rig to a stop. If I unplug them they work normally at start, until they reboot again.
This does not happen on my 6 rigs on the a Biostar tb 250 with everything else the same.
Anyone has any idea why? Any suggestions?

This is a known issue with these boards. We're currently awaiting feedback from ASUS on the matter, but, we think it may be related to BIOS version. Anything above vers. 120x has this issue.
Boards with 1001 up to 1010 don't seem to be affected.

Thing is, you won't be able to rollback since they've ME locked it.

Please check your BIOS version and report back so I can send as much data to their guys testing this.

Thanks!

I'm on Version 1206 on all I think.

TiasJ

newbie

Activity: 26

Merit: 0

Quote from: Johny101010 on June 25, 2019, 06:15:50 PM

I'm having a problem with 1 set of rigs.
They are all AMD 12 gpu rigs with 4gig of ram and Celeron cpu on ASUS B250 expert MoBo. When they are rebooted the load skyrockets and slows the rig to a stop. If I unplug them they work normally at start, until they reboot again.
This does not happen on my 6 rigs on the a Biostar tb 250 with everything else the same.
Anyone has any idea why? Any suggestions?

This is a known issue with these boards. We're currently awaiting feedback from ASUS on the matter, but, we think it may be related to BIOS version. Anything above vers. 120x has this issue.
Boards with 1001 up to 1010 don't seem to be affected.

Thing is, you won't be able to rollback since they've ME locked it.

Please check your BIOS version and report back so I can send as much data to their guys testing this.

Thanks!

Johny101010

full member

Activity: 218

Merit: 100

I'm having a problem with 1 set of rigs.
They are all AMD 12 gpu rigs with 4gig of ram and Celeron cpu on ASUS B250 expert MoBo. When they are rebooted the load skyrockets and slows the rig to a stop. If I unplug them they work normally at start, until they reboot again.
This does not happen on my 6 rigs on the a Biostar tb 250 with everything else the same.
Anyone has any idea why? Any suggestions?

dimafern

member

Activity: 577

Merit: 27

Major changes in this update

Power consumption statistics
Active schedule indication
Added "Go to ... page" to workers and cards list
GPU Hub improvement

Detailed changelog here

jdash

newbie

Activity: 34

Merit: 0

can i ask what is the equivalent of "-allpools 1" of claymore on Phoenix Miner

i cant seem to make phoenix miner work without it, claymore works if i added it

dimafern

member

Activity: 577

Merit: 27

We present our Hive OS Diskless PXE - solution for diskless rigs and server to boot them over the network.
Using Hive OS Diskless PXE will allow you to reduce the cost of your mining investment by saving on disk media.

System requirements for PXE server:
Any computer running Ubuntu 16 (VirtualBox is also supported *).
Other versions of Linux based on Debian are also possible.
Static IP address over cable Ethernet
At least 2 Gb of RAM
At least 4 Gb of free disk space

System requirements for diskless rig
4Gb+ of system RAM for AMD GPU RX 4xx/5xx
8Gb+ of system RAM for Nvidia cards (unsupported for now)
BIOS with PXE (netboot, etc) option

More details here

dimafern

member

Activity: 577

Merit: 27

0.6-55@190622
What's new?

renamed tool to change rig name from workername to shorter wname
fixed processing of reboot flag in batch mode for flashing AMD cards
Gminer v1.47 (significant performance improvements for VDS)
WildRig-Multi v0.17.8 (lower power consumption on pre-Vega GPUs and higher hashrate on Vega GPUs)
KBminer v1.3.11 (bug fix release)

dimafern

member

Activity: 577

Merit: 27

0.6-54@190619
What's new?

added new tool workername to change rig name
minor linux fixes
CPUminer-opt v3.9.4 (faster AVX2 for lyra2v3, quark, anime; fixed skein AVX2 regression)
CCminer-djm34 v1.1.20 (hashrate improvement up to 5%, bug fixes)
Gminer-opt v1.46 BETA (added ZelCash Equihash 125/4, improved Grin29/Swap/AE)
Sushi-Miner-CUDA v2.1.0 (improved performance)
WildRig-Multi v0.17.7 (slightly improved different algorithms for Vega cards)

dimafern

member

Activity: 577

Merit: 27

0.6-53@190618
What's new?

T-Rex v0.12.0 (added honeycomb algo)
WildRig-Multi v0.17.6 (added skein2 algo, up to 6% faster blake2b-btcc and blake2b-glt)

dragonmike

hero member

Activity: 1274

Merit: 556

Hi, is the stuck fan control issue still 100% related to a driver bug on Linux? I've got a mixed rig of pascal and turing cards... And every time I reboot, I need to vnc into the box and apply fixed fan speeds directly using the nvidia driver app... Quite annoying...

dimafern

member

Activity: 577

Merit: 27

0.6-53@190617-2

Claymore's Dual ETH v14.7 (no new features in Linux build, bug fixes)
KBminer v1.3.10 (added support mining vds on Nvidia cards)
KBminer: fixed startup with NVidia's backend enabled builds

ustcstone

newbie

Activity: 49

Merit: 0

Quote from: esparpiri on June 16, 2019, 08:17:14 AM

Hi people, i have a weird problem, i have a 8card rig (rx 580 8gb saphire pulse and 1 saphire nitro with a h110 pro btc+ asrock) when i conect the hdmi cable to one of the rx cards no matter what i do, if a switch the risers, conect to a different gpu or anything else, if i put 8 card the system boots, the hiveos starts but it wont start mining it stay in a dark screen with this symbol on top left (_), but when i conect only 7 gpus starts good and mine good, but if i conect the hdmi cable to the motherboard it recognize the 8 gpu and i can mine very good but i have problem with´applying the fans and voltage settings, why do you thing this happen?

Sorry my bad english

change PCI-E speed to GEN2 in bios,the same problem happend to me.....

Topic: Hiveon. №1 OS for mining - page 38. (Read 80804 times)