Pages:
Author

Topic: Hiveon. №1 OS for mining - page 67. (Read 80759 times)

newbie
Activity: 197
Merit: 0
June 26, 2018, 04:13:55 AM
hi all hive users
i have this command in my wallet config
-tt 55
-ttli 62
-fanmin 55
-fanmax 75

but i still have cards with this info in panel
59°   49%

why  hive does not control the temp?

miner is claymore


p.s: there is no fan control in AMD setting neither in tuning
newbie
Activity: 11
Merit: 0
June 23, 2018, 03:12:43 PM
Please help me with settings for AMD RX580 GPU for Lyra2z to mine gincoin.
I tried but the miner does not report hashrate in the pool
https://i.imgur.com/PxzeEGr.png

jr. member
Activity: 251
Merit: 4
June 22, 2018, 10:59:55 PM
HiveOS Linux v0.5-60
- ewbf 0.2 fork with equihash 144/5, 192/7
- autofans reworked and improved, still only manual config in /hive-config/autofan.conf
jr. member
Activity: 251
Merit: 4
June 22, 2018, 11:52:29 AM
I m using Lyra2z to mine gincoin . If it uses only130-140 per gpu then it makes sense.   I m getting around 18-19 MH/s total... Around 3.2 per gpu, does that sound normal with a little bit overclocking
Lyra2z - it's energy efficient algo like cryptonight, so your power consumption it's almost real
hero member
Activity: 906
Merit: 507
June 22, 2018, 10:55:17 AM
I tried the latest windows release on a rig with r9 cards and it won't load the xmr-stak wallet configuration on made on my account it loads the default with CPU mining only which also it doesn't send any stats to the hiveos dashboard
newbie
Activity: 6
Merit: 0
June 22, 2018, 10:21:06 AM
I m using Lyra2z to mine gincoin . If it uses only130-140 per gpu then it makes sense.   I m getting around 18-19 MH/s total... Around 3.2 per gpu, does that sound normal with a little bit overclocking
jr. member
Activity: 251
Merit: 4
June 22, 2018, 05:41:58 AM
I m running 6 1080ti with ccminer , everything works fine except , the GPUs are showing 130-140W power each.   the total power usage around 800W (for 6 GPUs)

I tried overclocking power to 200 , no change...  

Any ideas why the GPUs are not taking full power ?
Power Limit - it's not power usage from outlett. It's LIMIT to power usage. real power usage depends from algo power efficiency and may be lower than power limit
Which algo are you using ?
newbie
Activity: 6
Merit: 0
June 21, 2018, 10:20:54 PM
I m running 6 1080ti with ccminer , everything works fine except , the GPUs are showing 130-140W power each.   the total power usage around 800W (for 6 GPUs)

I tried overclocking power to 200 , no change...  

Any ideas why the GPUs are not taking full power ?
newbie
Activity: 5
Merit: 0
June 21, 2018, 11:59:17 AM
Hello guys, I have 2 machines with HiveOS (after the last windows update debacle I made the jump). I have two machines

  • 6 RX570 on a H81 BTC 2.0
  • 6 RX580 on a Asus Z270-a

For some reason the 6 RX580 machine cards are all fluctuating from anywhere between 8 and 30~ MH/s. I've tried

  • Reinstalling HiveOS
  • Running 4 cards to see if it's something to do with the number of cards
  • Switching Bios numbers to Gen 2, 3, Auto (all caused the machine to crash in under 5 minutes)

But have the same issues.  Strange thing is everything worked fine under windows. I only switched over due to the annoying last spring update and not wanting to deal with that again. Even stranger is I have a second mining machine with 6 cards but a H81 BTC 2.0 that is having no issues at all.
hero member
Activity: 906
Merit: 507
June 20, 2018, 07:17:39 PM
ASIC 0.1-05
- PROJECT_HASH support in config file


Windows client 0.1-01 Beta

Believe it or not but Hive now has a client for Windows. This is a BETA release


Download setup file here:
http://download.hiveos.farm/win/

Git Repository. Please report bugs here:
https://github.com/minershive/hiveos-win
Wow slamming out the updates will I finally be able to run my r9 cards in windows but all the great features hiveos has to offer
jr. member
Activity: 252
Merit: 8
June 20, 2018, 05:52:59 PM
Is Vega supported now ? Last time I tried to mine, got bunch of errors.
newbie
Activity: 6
Merit: 0
June 20, 2018, 12:54:02 PM
I am new to HiveOS and Mining , I heard lot of positive feedback so i want to install HiveOS instead of windows 10.

I tried to research instructions , most of them talk about installing it on USB drive, however i have windows installed on SSD , and i want to replace it with Hive OS or dual boot it ideally.  If someone can point me in right direction , it will help.

Secondly , when i created a rig in dashboard, It gives me bunch of wallet options on web UI , what are these wallets - are these the wallet address of coins i will be mining ? How do i select which coin , as no option to select coin name , just the algorithm.

In general HiveOS is so diffrent from windows, and i was unable to browse easily , couldnt even find  a notepad , nor could start mining as a sample even.   I searched youtube for step by step guide, but did not find .

I know these all are silly questions , but if anyone would be able to help  me, it wl be great.




jr. member
Activity: 251
Merit: 4
June 20, 2018, 06:36:17 AM
one more question - will it be possible to install older drivers in hiveos 2.0?
the latest nvidia drivers are not very got (hopefully yet) for mining
Yes it's possible.
read how-to on your rig /hive-drivers-pack/README.txt

BTW
HiveOS 2.0 is not released yet )
member
Activity: 308
Merit: 10
June 20, 2018, 06:29:25 AM
one more question - will it be possible to install older drivers in hiveos 2.0?
the latest nvidia drivers are not very got (hopefully yet) for mining
jr. member
Activity: 251
Merit: 4
June 20, 2018, 12:01:40 AM
ASIC 0.1-05
- PROJECT_HASH support in config file


Windows client 0.1-01 Beta

Believe it or not but Hive now has a client for Windows. This is a BETA release


Download setup file here:
http://download.hiveos.farm/win/

Git Repository. Please report bugs here:
https://github.com/minershive/hiveos-win
jr. member
Activity: 251
Merit: 4
June 18, 2018, 01:22:42 PM
Autofans, config misspelling ...  post with version announce and Telegram channel announce was already edited

Correct settings of autofans config file (which you can create at /hive-config/autofan.conf) are:
Code:
# Target GPU temperature
TARGET_TEMP=
# Minimal fan speed
MIN_FAN=30
# Stop mining at critical temp
CRITICAL_TEMP=85
# Set to 1 to disable AMD fan control
NO_AMD=0
remove "DEF_" prefix if you created config file. This variables internal only used by script and reserved for future releases.
jr. member
Activity: 251
Merit: 4
June 18, 2018, 10:06:43 AM
In one of my two rigs the hashrate of my cards is wildly fluctuating from 8 -> 30. Anyone have this issue and know how to to fix it?

RX580 and Asus z270-a. I've already tried reinstalling and tweaking here and there.
Common problem wrong BIOS settings. Check and set Gen2 for x16 and x1 PCIE slots
newbie
Activity: 5
Merit: 0
June 18, 2018, 07:41:38 AM
In one of my two rigs the hashrate of my cards is wildly fluctuating from 8 -> 30. Anyone have this issue and know how to to fix it?

RX580 and Asus z270-a. I've already tried reinstalling and tweaking here and there.
jr. member
Activity: 251
Merit: 4
June 18, 2018, 05:22:32 AM
wow thats a great update, thank you devs.
looking forward for 2.0 release
I'm think at least one minor update before release 2.0 you will seen yet
member
Activity: 308
Merit: 10
June 18, 2018, 04:31:19 AM
v0.5-59 Linux GPU&CPU client

Changelog:
- Autofans preview release, can be used with manual configuration in autofan.conf
- Ccminer wildkeccak scratchpad will be removed if the pool is changed
- cpuminer-opt 3.8.8.1 "Refresh" (modified by HiveOS team to get more accuracy temperature + small trick for fix zero temperature after mining during several hours + try network issue fix)

Remarks:
This a preview release of autofans, you can create /hive-config/autofan.conf file and put the values there:
# Target GPU temperature
DEF_TARGET_TEMP=
# Minimal fan speed
DEF_MIN_FAN=30
# Stop mining at critical temp
DEF_CRITICAL_TEMP=85
# Set to 1 to disable AMD fan control
DEF_NO_AMD=0

Web control of autofans settings will be available in Hive 2.0 which is coming soon.
If you planned use auftofan with AMD you must disable this function in miner (Claymore for example)
wow thats a great update, thank you devs.
looking forward for 2.0 release
Pages:
Jump to: