I hate asking questions that have already been answered, so I’ve spent several hours looking for an answer, but haven’t found one.
Here’s my question/problem…
I see that you can add a second miner by going to Rigs - > Clicking on the rig in question.
However, there isn’t an option to add a wallet to that 2nd miner. From what I can tell, it uses the 1st miner’s wallet info.
I want to mine ETH and CRC. I’ve got everything running on miner #1 for ETH and it’s working VERY well – THANK YOU! But how do I use ccminer and use a different wallet so what I mine is going to the correct wallet address?
By the way THANK YOU for making the first 3 rigs free. That’s quite generous compared to your competition.
Topic: Hiveon. №1 OS for mining - page 96. (Read 80796 times)
I have one question about AMD DAG Fix does this OS have it ?
Nice to see bminer has been added although I have an issue getting it running.
Wallet is filled out correctly but when switching from dstm to bminer it says the miner is 'unknown'.
Known bug or issue on my end?
Wallet is filled out correctly but when switching from dstm to bminer it says the miner is 'unknown'.
Known bug or issue on my end?
Anyone?
Edit:
Well problem solved, for some reason hiveos did not autoupdate. Just type selfupgrade in the console.
Has anyone tried the watchdog recommended by the Hive OS website? Do they work well?
Kinda hard to figure it out due to everything being written in Russian. Auto translation works somewhat well but still a user feedback would be much more useful...
Thanks!
Kinda hard to figure it out due to everything being written in Russian. Auto translation works somewhat well but still a user feedback would be much more useful...
Thanks!
Can you add a way to lock a voltage point for NVIDIA? The Windows way is to use tools like Afterburner or NVIDIA Inspector and it is really useful when you're mining ETH on NVIDIA cards because you can run them at 650mV.
Was using MultiPoolMiner from Aaronsace on Mining Pool Hub......could something of a similar nature be added so we can auto algo-switching ....mining most profitable as we go
I am new to HIVE OS.
I have 2 ASUS 1050 TI GPU having 4GB DDR5 MEM.
i have setup all configuration and its working properly.
Now i want to use OC on ASUS card but not sure how to use and what values need to add.
Current hash rate is low compared to windows.
I have 2 ASUS 1050 TI GPU having 4GB DDR5 MEM.
i have setup all configuration and its working properly.
Now i want to use OC on ASUS card but not sure how to use and what values need to add.
Current hash rate is low compared to windows.
Under Unix the value you need to enter are the double what you are used to in windows.
Should you be using + 75 in Windows, this translate into +150
I am experiencing problem with OpenVPN. I have setup it, but VPN IP did not show up in rig panel. After meddling a bit I reboot the rig and the IP show up. But now it is not displayed again. I noticed the bug after last updates, but I did not check it before update so I can't be 100% sure that the behaviour is due to update. The strange thing is that the IP is actually assigned. The rig can be accessed via the VPN, only no reference for the additional IP in webpanel RIG menu. @dimafern please advice how to troubleshoot.
UPD After reboot it show up again. Maybe reboot should be recommended after every update???
UPD After reboot it show up again. Maybe reboot should be recommended after every update???
I am new to HIVE OS.
I have 2 ASUS 1050 TI GPU having 4GB DDR5 MEM.
i have setup all configuration and its working properly.
Now i want to use OC on ASUS card but not sure how to use and what values need to add.
Current hash rate is low compared to windows.
I have 2 ASUS 1050 TI GPU having 4GB DDR5 MEM.
i have setup all configuration and its working properly.
Now i want to use OC on ASUS card but not sure how to use and what values need to add.
Current hash rate is low compared to windows.
Under Unix the value you need to enter are the double what you are used to in windows.
Should you be using + 75 in Windows, this translate into +150
what values will be best for ASUS OC ( 1050 TI)
Would like Hiveos to add R9 support also. My R9 280x are detected but have 0 hashrate on Claymore Zcash.
I am new to HIVE OS.
I have 2 ASUS 1050 TI GPU having 4GB DDR5 MEM.
i have setup all configuration and its working properly.
Now i want to use OC on ASUS card but not sure how to use and what values need to add.
Current hash rate is low compared to windows.
I have 2 ASUS 1050 TI GPU having 4GB DDR5 MEM.
i have setup all configuration and its working properly.
Now i want to use OC on ASUS card but not sure how to use and what values need to add.
Current hash rate is low compared to windows.
Under Unix the value you need to enter are the double what you are used to in windows.
Should you be using + 75 in Windows, this translate into +150
I am new to HIVE OS.
I have 2 ASUS 1050 TI GPU having 4GB DDR5 MEM.
i have setup all configuration and its working properly.
Now i want to use OC on ASUS card but not sure how to use and what values need to add.
Current hash rate is low compared to windows.
I have 2 ASUS 1050 TI GPU having 4GB DDR5 MEM.
i have setup all configuration and its working properly.
Now i want to use OC on ASUS card but not sure how to use and what values need to add.
Current hash rate is low compared to windows.
Click on rig name on the left and the CP will come up ....when you OC you put in details and space for next GPU
Please hurry with AMD Vega support!!!
I am new to HIVE OS.
I have 2 ASUS 1050 TI GPU having 4GB DDR5 MEM.
i have setup all configuration and its working properly.
Now i want to use OC on ASUS card but not sure how to use and what values need to add.
Current hash rate is low compared to windows.
I have 2 ASUS 1050 TI GPU having 4GB DDR5 MEM.
i have setup all configuration and its working properly.
Now i want to use OC on ASUS card but not sure how to use and what values need to add.
Current hash rate is low compared to windows.
This looks terrific, just what I was looking for.
The panel is especially nice.
Thanks for sharing!
The panel is especially nice.
Thanks for sharing!
Im still new to hiveos but have been running now 4 days solid and the mine just idles away in the backroom .....i dont en check on it just monitoring contral panel. This will soon become the most wanted and most used program. Another thumbs up dimafern
Is there a max gpu temperature setting anywhere that will stop mining if the gpus reach a certain temperature? I know you can do this with Claymore, but I'm using ethminer.
Also, Is it possible to specify a failover pool for the eth miner config? There is only 1 field for Pool server - but I wanted to configure a failover server as ethermine.org has
2 pool servers: us1.ethermine.org, and us2.ethermine.org.
Great work so far!
Also, Is it possible to specify a failover pool for the eth miner config? There is only 1 field for Pool server - but I wanted to configure a failover server as ethermine.org has
2 pool servers: us1.ethermine.org, and us2.ethermine.org.
Great work so far!
Please add multi algo for nvidia cards
Nice to see bminer has been added although I have an issue getting it running.
Wallet is filled out correctly but when switching from dstm to bminer it says the miner is 'unknown'.
Known bug or issue on my end?
Wallet is filled out correctly but when switching from dstm to bminer it says the miner is 'unknown'.
Known bug or issue on my end?
Anyone?
Jump to: