Hi,
can we pilot rigs ( reboot, change miner, ... ) from any api or just calling url with parameters, and use web hive only for monitoring ?
Thanks
Topic: Hiveon. №1 OS for mining - page 97. (Read 80843 times)
Can you undervolt GPU ? If yes, how?
Hi, a simple question.
If I got some rigs and I make usb with hive os. How I can setup rigID + password without connecting a monitor? I think join via SSH and editing a config file, but I dont know IP, and for sure there are easier way.
Thanks a lot.
If I got some rigs and I make usb with hive os. How I can setup rigID + password without connecting a monitor? I think join via SSH and editing a config file, but I dont know IP, and for sure there are easier way.
Thanks a lot.
You can create a file call rig.conf including (ID / Password set for the RIG / Wallet)
Then after create USB key put the file on the root of the HiveOS partition on the usb key
Rig.conf example:
#URL where hive server is
HIVE_HOST_URL="https://hiveos.farm"
#Id of the rig, numeric value from admin panel
RIG_ID=The-ID-of-rig
#Rig passord as in admin panel
RIG_PASSWD="the-rig-password"
#Rig hostname and worker name for pool
WORKER_NAME="name-of-rig"
#Selected miner
MINER=""
MINER2=""
#Wallet
WALLET="wallet-assigne-to-the-rig"
#Watchdog
WD_ENABLED=
-----------------------------
Plug the usb key and boot.
But I can access to this partition from windows?
When you create your USB key or SSD at the end you have access to the partitions of HiveOS...
Just installed it on two computers. So far so good. Hash rate is a bit lower than windows mining ether on claymore, but at least the system sees all the GPUs. Wondering if there is a way to do more tweaking for rx580 and 1070 ti and 1080ti. Will continue but to mess around with settings for now. Will report back with findings.
I managed to setup hiveos to run 2 miners:
1. claymore cryptonote
2. CCminer nvidia
But when i run shell in a box, type "miner" only able to allow me to access to first miner log,
Anyone know how to access and reads the second miner log?
1. claymore cryptonote
2. CCminer nvidia
But when i run shell in a box, type "miner" only able to allow me to access to first miner log,
Anyone know how to access and reads the second miner log?
ctrl-a twice
Is there a way to monitor memory errors from each GPU, like it's possible to do on OverdriveNTool on Windows!? That'd be a hell out of a feature. I'm a new miner and my rig is very stable due to that error monitoring on each gpu memory.
please add target temperature 
is there a discord channel? 
What a boring Program.......nothing to do ........the complete package ...i even forgot i have a mine ........jokes aside .......Very well done 
Very nice os, I like the interface and the easy oc settings and bios flashing.
I moved 3 rigs which had some stability problems on windows, issue fixed now. Will move the rest later after further testings.
I moved 3 rigs which had some stability problems on windows, issue fixed now. Will move the rest later after further testings.
Nice to see bminer has been added although I have an issue getting it running.
Wallet is filled out correctly but when switching from dstm to bminer it says the miner is 'unknown'.
Known bug or issue on my end?
Wallet is filled out correctly but when switching from dstm to bminer it says the miner is 'unknown'.
Known bug or issue on my end?
Does this Os have auto switch function for the pools like nicehash or ahashpoool?
I managed to setup hiveos to run 2 miners:
1. claymore cryptonote
2. CCminer nvidia
But when i run shell in a box, type "miner" only able to allow me to access to first miner log,
Anyone know how to access and reads the second miner log?
1. claymore cryptonote
2. CCminer nvidia
But when i run shell in a box, type "miner" only able to allow me to access to first miner log,
Anyone know how to access and reads the second miner log?
Is there any way to adjust intensity for ccminer?
"intensity" : 18
... in the options field
I Want to try this OS, good OS with Fan/Overclocking supported at my GPU (RX 570)
but I must think first, because I have a lot of wallet installed on my rig, any idea?
but I must think first, because I have a lot of wallet installed on my rig, any idea?
We recently moved our farm to HiveOS and can confirm that it is amazing. We are very happy with its features and performance.
This is after using a few different OSes, one of which was our main operating OS. It was not that we were unhappy it is that HiveOS is just so much better.
I strongly recommend looking into it
This is after using a few different OSes, one of which was our main operating OS. It was not that we were unhappy it is that HiveOS is just so much better.
I strongly recommend looking into it
Looks really good....
Hi devs
Whats the best way to control my system fans if I am using the motherboard headers and I want the fans to regulate temp?
lm-sensors fanspeed? or is there a better way!
also hiveos is amaze thankya kindly!
Whats the best way to control my system fans if I am using the motherboard headers and I want the fans to regulate temp?
lm-sensors fanspeed? or is there a better way!
also hiveos is amaze thankya kindly!
Is there any way to adjust intensity for ccminer?
"intensity" : 18
... in the options field
Hey Guys
the OS looks good so far only one Issue which i dont think is the OS problem but my Problem. I been usingSMOS on MiningPoolHub for about 2 months and would like to try Hiveos. But my issue has always been ....I for some frigging reason can never configure the strings for MPH. Could somebody please try to assist me with fixing this issue. the stirng i have been using on Claymore 10.5 has been as below on SMOS and it works
-epool europe.ethash-hub.miningpoolhub.com:17020 -ewal JUPIE2008.worker1 -eworker JUPIE2008.worker1 -esm 2 -epsw x -allcoins 1 -allpools 1 -dpool stratum+tcp://hub.miningpoolhub.com:20550 -dwal JUPIE2008.worker1 -dcri 10 -dpsw x -dcoin sc
with the demise of SIACOIN i have altered the string as follows:
-epool europe.ethash-hub.miningpoolhub.com:20535, WALLET: %EWAL%.%WORKER_NAME%, PSW: x, ESM: 2
Please could somebody tell me where im going wrong or what the hell is going on..... I know withthe 17xxxx ports one doesnt need to add a wallets as goes to the worker on MPH. I would prefer an all coin string for ethash. I hope i havent confused everything..
Jupie2008
the OS looks good so far only one Issue which i dont think is the OS problem but my Problem. I been usingSMOS on MiningPoolHub for about 2 months and would like to try Hiveos. But my issue has always been ....I for some frigging reason can never configure the strings for MPH. Could somebody please try to assist me with fixing this issue. the stirng i have been using on Claymore 10.5 has been as below on SMOS and it works
-epool europe.ethash-hub.miningpoolhub.com:17020 -ewal JUPIE2008.worker1 -eworker JUPIE2008.worker1 -esm 2 -epsw x -allcoins 1 -allpools 1 -dpool stratum+tcp://hub.miningpoolhub.com:20550 -dwal JUPIE2008.worker1 -dcri 10 -dpsw x -dcoin sc
with the demise of SIACOIN i have altered the string as follows:
-epool europe.ethash-hub.miningpoolhub.com:20535, WALLET: %EWAL%.%WORKER_NAME%, PSW: x, ESM: 2
Please could somebody tell me where im going wrong or what the hell is going on..... I know withthe 17xxxx ports one doesnt need to add a wallets as goes to the worker on MPH. I would prefer an all coin string for ethash. I hope i havent confused everything..
Jupie2008
Jump to: