Thanks. Happy Holidays to you too
Seems down now..We were DOS'ed. Someone seems to be a little bit envious...
Topic: HoboNickels - HBN - High Fast Stake - Version 2.0! More Secure, Less Intensive - page 268. (Read 478852 times)
December 27, 2013, 02:56:32 AM
We were DOS'ed. Someone seems to be a little bit envious...
December 27, 2013, 02:49:59 AM
The Washington Post mentions HoboNickels 
http://www.washingtonpost.com/blogs/the-switch/wp/2013/12/26/dogecoins-and-litecoins-and-peercoins-oh-my-what-you-need-to-know-about-bitcoin-alternatives/
http://www.washingtonpost.com/blogs/the-switch/wp/2013/12/26/dogecoins-and-litecoins-and-peercoins-oh-my-what-you-need-to-know-about-bitcoin-alternatives/
December 26, 2013, 11:56:51 AM
what payload is on the HBN client? I started to notice the ASIC miners on a computer would start to go on and off while the sticks on other computers were not being affected. Eventually I pinpointed the cause to the HBN client. None of the other clients running on the same computer have any effect on the usb sticks. so the question is obvious, what did you add to the client? I noticed the CPU running at 90%+ used by the HBN client. I will no longer run the client, i will send the coins straight into cryptsy and recommend everyone to do the same
If you solo mined for sometime, then you have MANY MANY small inputs trying to stake. See the post above.
I run multiple wallets and I run ASCIs with no issues at all on same computer. I have quad core. Sounds like you have single core. So you need keep the inputs for stake down to a reasonable level.
that particular computer has a I5 2.7. The ASIC lights keep going steady when the HBN wallet is running. I have around 50 sticks on that machine. I haven't run a packet sniffer but is very suspicious that only happens when the HBN client is running
Are you running stakes with many small inputs? If so this is the cause of the high CPU usage, which could effect other processes.
But if you are insinuating that there is some type of back door to which is taking your ASCI mining power, well sorry my friend that is not the case. The source is on github, and can be compiled easily.
December 26, 2013, 11:45:07 AM
what payload is on the HBN client? I started to notice the ASIC miners on a computer would start to go on and off while the sticks on other computers were not being affected. Eventually I pinpointed the cause to the HBN client. None of the other clients running on the same computer have any effect on the usb sticks. so the question is obvious, what did you add to the client? I noticed the CPU running at 90%+ used by the HBN client. I will no longer run the client, i will send the coins straight into cryptsy and recommend everyone to do the same
If you solo mined for sometime, then you have MANY MANY small inputs trying to stake. See the post above.
I run multiple wallets and I run ASCIs with no issues at all on same computer. I have quad core. Sounds like you have single core. So you need keep the inputs for stake down to a reasonable level.
that particular computer has a I5 2.7. The ASIC lights keep going steady when the HBN wallet is running. I have around 50 sticks on that machine. I haven't run a packet sniffer but is very suspicious that only happens when the HBN client is running
December 26, 2013, 10:34:03 AM
So it sounds like you have many many small inputs, trying to stake at once. This is a common problem with fast staking coins. I handle this by creating a second wallet(use the new button) (wallet-stake.dat). Then send the coins in 10% batches from the one wallet to the other. I like to wait a few hours between sends.
This should help. You will loose coins days, but only takes 10 days to begin staking again.
To get the wallet to be more responsive to do this action, start it with -reservebalance=9999999. After you have sent the coins to the stake wallet, and they are confirmed, stop the client and restart.
but If I loose coin days I`ll loose future coins? and coins-days will never restore to the same amount?
I was solomining for a while and all inputs I had - "5" and it`s a lot cause I mined ~6k
any work around to save coin days?
does my 90% orphans PoS problem caused by many transactions?
Not sure what you mean by future coins? There is no work around to save coins days. But after a coin stakes, those days reset anyway. So not much is lost.
Yes 6,000, in 5 block size is too much for the CPU to handle. That is 1,200 inputs going into the CPU at once.
Think of it this way. What you have is like running 1,200 5870s on the same box. If you combine them, it would be like running 10 7950s. Much more efficient.
All the issues are related.
Combine your coins into another wallet, in 500 chunks, with 2 or 3 hours separating the batches. Then those coins will start staking very nicely for many many months, until you need to combine again.
Good luck
December 26, 2013, 10:16:21 AM
So it sounds like you have many many small inputs, trying to stake at once. This is a common problem with fast staking coins. I handle this by creating a second wallet(use the new button) (wallet-stake.dat). Then send the coins in 10% batches from the one wallet to the other. I like to wait a few hours between sends.
This should help. You will loose coins days, but only takes 10 days to begin staking again.
To get the wallet to be more responsive to do this action, start it with -reservebalance=9999999. After you have sent the coins to the stake wallet, and they are confirmed, stop the client and restart.
but If I loose coin days I`ll loose future coins? and coins-days will never restore to the same amount?
I was solomining for a while and all inputs I had - "5" and it`s a lot cause I mined ~6k
any work around to save coin days?
does my 90% orphans PoS problem caused by many transactions?
December 26, 2013, 09:53:23 AM
what payload is on the HBN client? I started to notice the ASIC miners on a computer would start to go on and off while the sticks on other computers were not being affected. Eventually I pinpointed the cause to the HBN client. None of the other clients running on the same computer have any effect on the usb sticks. so the question is obvious, what did you add to the client? I noticed the CPU running at 90%+ used by the HBN client. I will no longer run the client, i will send the coins straight into cryptsy and recommend everyone to do the same
If you solo mined for sometime, then you have MANY MANY small inputs trying to stake. See the post above.
I run multiple wallets and I run ASCIs with no issues at all on same computer. I have quad core. Sounds like you have single core. So you need keep the inputs for stake down to a reasonable level.
December 26, 2013, 09:50:48 AM
90% of my PoS mined coins currently "Generated but not accepted" why? it was opposite before 90% was accepted...
10% orphan rate is normal. 90% is definitely wrong.
One other person complained of similar issue. I am gathering more information.
Please answer the following questions.
What version of HBN are you using?
Are you fully up-to-date with the block explorer? As far as the correct block number and difficulty?
What type system are you running on? Win build(if win), ram, cpu?
Is your CPU maxed at one core? IE Hobonickels-qt.exe is taking 25% of a quad core system.
What is your internet type? and latency?
How many connections are you holding?
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake -maxconnections=50
Let it run for a bit get a few good stakes or orphans, then please zip up the debug.log and put it somewhere for me to look at. You can PM me the location or post here.
- version is: v1.2.2.3-ge43cb68-hobo
- looks like it is fully up to date:
{
"version" : "v1.2.2.3-ge43cb68-hobo",
"protocolversion" : 70002,
"blocks" : 445602,
"moneysupply" : 2243498.30957900,
"connections" : 8,
"wallets" : 1,
"proxy" : "",
"ip" : "98.216.202.19",
"difficulty" : 0.63282155,
"testnet" : false,
"paytxfee" : 0.00000000,
"errors" : ""
}
- Win 8.1 Pro x64 32Gb Ram i7-3960x
- it is 8% - what is equal to 1 core in 12 core CPU (6 physical + 6 virtual)
Also hobo running extremly slow (starting tooks a minute+ and other actions - even getinfo and trying to copy it - make window unresponsive, transaction log sorting for ex. makes a hobo-window unresponsive for a minute+ too)
- internet pretty good - let me know how to measure it and where to ping... as for speedtest.net it is 14 ms/10/10mbits
- maxconnections=100
I have an old debug log ~ 26 Mb and I`ll create a new one - let me know which you want or both.
Thanks!
So it sounds like you have many many small inputs, trying to stake at once. This is a common problem with fast staking coins. I handle this by creating a second wallet(use the new button) (wallet-stake.dat). Then send the coins in 10% batches from the one wallet to the other. I like to wait a few hours between sends.
This should help. You will loose coins days, but only takes 10 days to begin staking again.
To get the wallet to be more responsive to do this action, start it with -reservebalance=9999999. After you have sent the coins to the stake wallet, and they are confirmed, stop the client and restart.
December 26, 2013, 09:45:28 AM
Just got my first PoSes, it's very attractive to print money from money
I just cant get how this magic works: it looks like it splits the amount in wallet to lower parts or combines the transactions to make several stakes ?
And also it looks like i got more than 2% (almost 3 %
) Thats great, but is'nt it a bug ?
I just cant get how this magic works: it looks like it splits the amount in wallet to lower parts or combines the transactions to make several stakes ?
And also it looks like i got more than 2% (almost 3 %
) Thats great, but is'nt it a bug ? It ranges from 2-6% depending on the length of time it took to stake
December 26, 2013, 09:15:23 AM
90% of my PoS mined coins currently "Generated but not accepted" why? it was opposite before 90% was accepted...
10% orphan rate is normal. 90% is definitely wrong.
One other person complained of similar issue. I am gathering more information.
Please answer the following questions.
What version of HBN are you using?
Are you fully up-to-date with the block explorer? As far as the correct block number and difficulty?
What type system are you running on? Win build(if win), ram, cpu?
Is your CPU maxed at one core? IE Hobonickels-qt.exe is taking 25% of a quad core system.
What is your internet type? and latency?
How many connections are you holding?
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake -maxconnections=50
Let it run for a bit get a few good stakes or orphans, then please zip up the debug.log and put it somewhere for me to look at. You can PM me the location or post here.
- version is: v1.2.2.3-ge43cb68-hobo
- looks like it is fully up to date:
{
"version" : "v1.2.2.3-ge43cb68-hobo",
"protocolversion" : 70002,
"blocks" : 445602,
"moneysupply" : 2243498.30957900,
"connections" : 8,
"wallets" : 1,
"proxy" : "",
"ip" : "98.216.202.19",
"difficulty" : 0.63282155,
"testnet" : false,
"paytxfee" : 0.00000000,
"errors" : ""
}
- Win 8.1 Pro x64 32Gb Ram i7-3960x
- it is 8% - what is equal to 1 core in 12 core CPU (6 physical + 6 virtual)
Also hobo running extremly slow (starting tooks a minute+ and other actions - even getinfo and trying to copy it - make window unresponsive, transaction log sorting for ex. makes a hobo-window unresponsive for a minute+ too)
- internet pretty good - let me know how to measure it and where to ping... as for speedtest.net it is 14 ms/10/10mbits
- maxconnections=100
I have an old debug log ~ 26 Mb and I`ll create a new one - let me know which you want or both.
Thanks!
December 26, 2013, 08:56:16 AM
what payload is on the HBN client? I started to notice the ASIC miners on a computer would start to go on and off while the sticks on other computers were not being affected. Eventually I pinpointed the cause to the HBN client. None of the other clients running on the same computer have any effect on the usb sticks. so the question is obvious, what did you add to the client? I noticed the CPU running at 90%+ used by the HBN client. I will no longer run the client, i will send the coins straight into cryptsy and recommend everyone to do the same
December 26, 2013, 03:00:46 AM
Just got my first PoSes, it's very attractive to print money from money
I just cant get how this magic works: it looks like it splits the amount in wallet to lower parts or combines the transactions to make several stakes ?
And also it looks like i got more than 2% (almost 3 %) Thats great, but is'nt it a bug ?
I just cant get how this magic works: it looks like it splits the amount in wallet to lower parts or combines the transactions to make several stakes ?
And also it looks like i got more than 2% (almost 3 %
) Thats great, but is'nt it a bug ? December 26, 2013, 01:00:08 AM
90% of my PoS mined coins currently "Generated but not accepted" why? it was opposite before 90% was accepted...
10% orphan rate is normal. 90% is definitely wrong.
One other person complained of similar issue. I am gathering more information.
Please answer the following questions.
What version of HBN are you using?
Are you fully up-to-date with the block explorer? As far as the correct block number and difficulty?
What type system are you running on? Win build(if win), ram, cpu?
Is your CPU maxed at one core? IE Hobonickels-qt.exe is taking 25% of a quad core system.
What is your internet type? and latency?
How many connections are you holding?
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake -maxconnections=50
Let it run for a bit get a few good stakes or orphans, then please zip up the debug.log and put it somewhere for me to look at. You can PM me the location or post here.
December 26, 2013, 12:54:15 AM
Hi Tranz,
My compliments, you're doing a great job!
Have a nice Christmas all!
My compliments, you're doing a great job!
Have a nice Christmas all!
Thanks! Merry Christmas to you too.
December 25, 2013, 11:18:22 AM
90% of my PoS mined coins currently "Generated but not accepted" why? it was opposite before 90% was accepted...
December 25, 2013, 11:01:33 AM
Hi Tranz,
My compliments, you're doing a great job!
Have a nice Christmas all!
My compliments, you're doing a great job!
Have a nice Christmas all!
December 24, 2013, 11:53:12 AM
Merry christmas everybody!
The next three days you're mining Hobo with zero fees. Good luck!
hbn.smartmining.net
The next three days you're mining Hobo with zero fees. Good luck!
hbn.smartmining.net
Thanks. Happy Holidays to you too
Seems down now..
December 24, 2013, 11:46:57 AM
dear all,
need support in testing our new HBN pool 0% pool fees. http://hbn.cryptoplanet.net
if any support needed please contact on: [email protected]
need support in testing our new HBN pool 0% pool fees. http://hbn.cryptoplanet.net
if any support needed please contact on: [email protected]
Testing it out, so far so good. Will throw it up on the website after successful few hours of mining. What is the pool fee normally?
December 24, 2013, 11:20:58 AM
dear all,
need support in testing our new HBN pool 0% pool fees. http://hbn.cryptoplanet.net
if any support needed please contact on: [email protected]
need support in testing our new HBN pool 0% pool fees. http://hbn.cryptoplanet.net
if any support needed please contact on: [email protected]
December 23, 2013, 05:44:57 PM
Merry christmas everybody!
The next three days you're mining Hobo with zero fees. Good luck!
hbn.smartmining.net
The next three days you're mining Hobo with zero fees. Good luck!
hbn.smartmining.net
Thanks. Happy Holidays to you too
Jump to: