Merry christmas everybody!
The next three days you're mining Hobo with zero fees. Good luck!
hbn.smartmining.net
Topic: HoboNickels - HBN - High Fast Stake - Version 2.0! More Secure, Less Intensive - page 269. (Read 478852 times)
December 23, 2013, 12:04:14 PM
December 23, 2013, 11:39:28 AM
Hot Diggity Dang, I just got me 1 bitcoin worth of them there HoboNickels. I'll toss it in my pouch and bury it out back of Mr Richards' ole apple tree.
I mean, keep up the good work supporting this coin...any future plans for it?
I mean, keep up the good work supporting this coin...any future plans for it?
Definitely want to bury them. The coverage from coinmarketcap.com and also our advertising campaign is making the community grow everyday
December 23, 2013, 08:19:50 AM
Hot Diggity Dang, I just got me 1 bitcoin worth of them there HoboNickels. I'll toss it in my pouch and bury it out back of Mr Richards' ole apple tree.
I mean, keep up the good work supporting this coin...any future plans for it?
I mean, keep up the good work supporting this coin...any future plans for it?
Thanks. Although with HBNs generous staking algo, it is best to leave a little bit connected to the network to enjoy a nice juicy stake.
I have lots of plans for HBN. Short term, continue to secure the network and wallet. Mid term employ Stake 4 Charity. Longer Term, create "Deal of the Day" directly into the wallet, pushed through the network.
Thanks for your support!
December 23, 2013, 03:25:00 AM
Hot Diggity Dang, I just got me 1 bitcoin worth of them there HoboNickels. I'll toss it in my pouch and bury it out back of Mr Richards' ole apple tree.
I mean, keep up the good work supporting this coin...any future plans for it?
I mean, keep up the good work supporting this coin...any future plans for it?
December 22, 2013, 01:12:59 PM
issues with transaction. Got a new motherboard and didnt realize my computer time was off. I had sent 40 hobocoins to a second wallet I had setup for stake with the time set wrong. As a result these coins wont confirm. I do a wallet repair and it pulls the coins back into my wallet. But on next boot it trys to send transaction back out. Any idea how to fix this? If not and for my sanity I may just write off 40 HBN and start a new wallet. Thank you
This is an interesting one. I'm not sure the best way to handle that. Let me see if I came up with a solution.
Ended up fixing it. Just dumped the private key deleted and created a default wallet and imported private key again. And vwalla it worked all coins accounted for
Thanks though
December 22, 2013, 01:10:49 PM
The usual 1%.
December 22, 2013, 01:06:51 PM
Here is a new PPLNS HBN pool.
hbn.smartmining.net
Feel free to sign up. We have VARDIFF, stratum and payout every 5 minutes.
Hobo is a fast coin and we have setup stratum accordingly. Works very well with low- and high-end rigs.
Our stratum server has no problems with POS coins (like Hobo), so it runs very smoothly serving the pool.
If you have any questions just drop me a note.
Happy hashing!
hbn.smartmining.net
Feel free to sign up. We have VARDIFF, stratum and payout every 5 minutes.
Hobo is a fast coin and we have setup stratum accordingly. Works very well with low- and high-end rigs.
Our stratum server has no problems with POS coins (like Hobo), so it runs very smoothly serving the pool.
If you have any questions just drop me a note.
Happy hashing!
what is your pool fee?
December 22, 2013, 10:53:39 AM
issues with transaction. Got a new motherboard and didnt realize my computer time was off. I had sent 40 hobocoins to a second wallet I had setup for stake with the time set wrong. As a result these coins wont confirm. I do a wallet repair and it pulls the coins back into my wallet. But on next boot it trys to send transaction back out. Any idea how to fix this? If not and for my sanity I may just write off 40 HBN and start a new wallet. Thank you
This is an interesting one. I'm not sure the best way to handle that. Let me see if I came up with a solution.
December 22, 2013, 09:29:03 AM
Here is a new PPLNS HBN pool.
hbn.smartmining.net
Feel free to sign up. We have VARDIFF, stratum and payout every 5 minutes.
Hobo is a fast coin and we have setup stratum accordingly. Works very well with low- and high-end rigs.
Our stratum server has no problems with POS coins (like Hobo), so it runs very smoothly serving the pool.
If you have any questions just drop me a note.
Happy hashing!
hbn.smartmining.net
Feel free to sign up. We have VARDIFF, stratum and payout every 5 minutes.
Hobo is a fast coin and we have setup stratum accordingly. Works very well with low- and high-end rigs.
Our stratum server has no problems with POS coins (like Hobo), so it runs very smoothly serving the pool.
If you have any questions just drop me a note.
Happy hashing!
December 22, 2013, 12:33:49 AM
issues with transaction. Got a new motherboard and didnt realize my computer time was off. I had sent 40 hobocoins to a second wallet I had setup for stake with the time set wrong. As a result these coins wont confirm. I do a wallet repair and it pulls the coins back into my wallet. But on next boot it trys to send transaction back out. Any idea how to fix this? If not and for my sanity I may just write off 40 HBN and start a new wallet. Thank you
December 21, 2013, 09:53:56 PM
Messed around adding Level DB tonight. So far so good. I am hoping it will help improve start up time. It does at least lower the block chain size from 619 meg to 309. So that is at should be helpful for the future.
December 20, 2013, 04:06:34 PM
i am getting lot of stake orphans is this normal?
like i get 5-6 orphan stakes to get 1 that confirms
like i get 5-6 orphan stakes to get 1 that confirms
Normal maybe, but not acceptable. It should be 1 or 2 orphans for every 10 good ones. If you are getting that many orphans, that is usually caused by too many small stakes. It is best to combine the coins into larger batches. depending on how many coins you have I suggest 250-1000 coin batches. This can be easily done by creating a second wallet called wallet-stake.dat and sending coins to it.
i have my payments in 500-1000 batches in a second wallet if you remember we discussed this few pages back and i did as you recommended.
screenshot http://prntscr.com/2clcga
today all orphans
this is a screenshot of my payments http://prntscr.com/2clfz1
Ok thank you I forgot about our conversation. Hmmm something is wrong for sure. I see you have plenty of connections, so that is not it.
Are you fully up-to-date with the block explorer? As far as the correct block number and difficulty?
What type system are you running on? Win type, ram, cpu?
Is your CPU maxed at one core?
What is your internet type? and latency?
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake
Let it run for a bit get a few good stakes or orphans, then please zip up the debug.log and put it somewhere for me to look at. You can PM me the location or post here.
Sorry about the trouble. I will do my best to get to the bottom of it. This is the first I have heard of this problem
how do i restart
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake
and i am running windows 7 64bit 4gb and i am mining on the same system it is an amd cpu
screenshot of cpu usage http://prntscr.com/2coe6l
Just shut down the client, then in the dos command prompt start it up with those switches.
how is your mining going? No issues with orphans?
mining is fine i am using the blocks pool
i will try these commands
and report back
do i close it after that and restart it normal??
Ok I thought you were solo mining.
yes you can close and restart normal after you get a few stakes.
December 20, 2013, 04:03:21 PM
i am getting lot of stake orphans is this normal?
like i get 5-6 orphan stakes to get 1 that confirms
like i get 5-6 orphan stakes to get 1 that confirms
Normal maybe, but not acceptable. It should be 1 or 2 orphans for every 10 good ones. If you are getting that many orphans, that is usually caused by too many small stakes. It is best to combine the coins into larger batches. depending on how many coins you have I suggest 250-1000 coin batches. This can be easily done by creating a second wallet called wallet-stake.dat and sending coins to it.
i have my payments in 500-1000 batches in a second wallet if you remember we discussed this few pages back and i did as you recommended.
screenshot http://prntscr.com/2clcga
today all orphans
this is a screenshot of my payments http://prntscr.com/2clfz1
Ok thank you I forgot about our conversation. Hmmm something is wrong for sure. I see you have plenty of connections, so that is not it.
Are you fully up-to-date with the block explorer? As far as the correct block number and difficulty?
What type system are you running on? Win type, ram, cpu?
Is your CPU maxed at one core?
What is your internet type? and latency?
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake
Let it run for a bit get a few good stakes or orphans, then please zip up the debug.log and put it somewhere for me to look at. You can PM me the location or post here.
Sorry about the trouble. I will do my best to get to the bottom of it. This is the first I have heard of this problem
how do i restart
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake
and i am running windows 7 64bit 4gb and i am mining on the same system it is an amd cpu
screenshot of cpu usage http://prntscr.com/2coe6l
Just shut down the client, then in the dos command prompt start it up with those switches.
how is your mining going? No issues with orphans?
mining is fine i am using the blocks pool
i will try these commands
and report back
do i close it after that and restart it normal??
December 20, 2013, 04:00:57 PM
i am getting lot of stake orphans is this normal?
like i get 5-6 orphan stakes to get 1 that confirms
like i get 5-6 orphan stakes to get 1 that confirms
Normal maybe, but not acceptable. It should be 1 or 2 orphans for every 10 good ones. If you are getting that many orphans, that is usually caused by too many small stakes. It is best to combine the coins into larger batches. depending on how many coins you have I suggest 250-1000 coin batches. This can be easily done by creating a second wallet called wallet-stake.dat and sending coins to it.
i have my payments in 500-1000 batches in a second wallet if you remember we discussed this few pages back and i did as you recommended.
screenshot http://prntscr.com/2clcga
today all orphans
this is a screenshot of my payments http://prntscr.com/2clfz1
Ok thank you I forgot about our conversation. Hmmm something is wrong for sure. I see you have plenty of connections, so that is not it.
Are you fully up-to-date with the block explorer? As far as the correct block number and difficulty?
What type system are you running on? Win type, ram, cpu?
Is your CPU maxed at one core?
What is your internet type? and latency?
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake
Let it run for a bit get a few good stakes or orphans, then please zip up the debug.log and put it somewhere for me to look at. You can PM me the location or post here.
Sorry about the trouble. I will do my best to get to the bottom of it. This is the first I have heard of this problem
how do i restart
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake
and i am running windows 7 64bit 4gb and i am mining on the same system it is an amd cpu
screenshot of cpu usage http://prntscr.com/2coe6l
Just shut down the client, then in the dos command prompt start it up with those switches.
how is your mining going? No issues with orphans?
December 20, 2013, 03:23:57 PM
i am getting lot of stake orphans is this normal?
like i get 5-6 orphan stakes to get 1 that confirms
like i get 5-6 orphan stakes to get 1 that confirms
Normal maybe, but not acceptable. It should be 1 or 2 orphans for every 10 good ones. If you are getting that many orphans, that is usually caused by too many small stakes. It is best to combine the coins into larger batches. depending on how many coins you have I suggest 250-1000 coin batches. This can be easily done by creating a second wallet called wallet-stake.dat and sending coins to it.
i have my payments in 500-1000 batches in a second wallet if you remember we discussed this few pages back and i did as you recommended.
screenshot http://prntscr.com/2clcga
today all orphans
this is a screenshot of my payments http://prntscr.com/2clfz1
Ok thank you I forgot about our conversation. Hmmm something is wrong for sure. I see you have plenty of connections, so that is not it.
Are you fully up-to-date with the block explorer? As far as the correct block number and difficulty?
What type system are you running on? Win type, ram, cpu?
Is your CPU maxed at one core?
What is your internet type? and latency?
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake
Let it run for a bit get a few good stakes or orphans, then please zip up the debug.log and put it somewhere for me to look at. You can PM me the location or post here.
Sorry about the trouble. I will do my best to get to the bottom of it. This is the first I have heard of this problem
how do i restart
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake
and i am running windows 7 64bit 4gb and i am mining on the same system it is an amd cpu
screenshot of cpu usage http://prntscr.com/2coe6l
December 20, 2013, 02:54:33 PM
i am getting lot of stake orphans is this normal?
like i get 5-6 orphan stakes to get 1 that confirms
like i get 5-6 orphan stakes to get 1 that confirms
Normal maybe, but not acceptable. It should be 1 or 2 orphans for every 10 good ones. If you are getting that many orphans, that is usually caused by too many small stakes. It is best to combine the coins into larger batches. depending on how many coins you have I suggest 250-1000 coin batches. This can be easily done by creating a second wallet called wallet-stake.dat and sending coins to it.
i have my payments in 500-1000 batches in a second wallet if you remember we discussed this few pages back and i did as you recommended.
screenshot http://prntscr.com/2clcga
today all orphans
this is a screenshot of my payments http://prntscr.com/2clfz1
Ok thank you I forgot about our conversation. Hmmm something is wrong for sure. I see you have plenty of connections, so that is not it.
Are you fully up-to-date with the block explorer? As far as the correct block number and difficulty?
What type system are you running on? Win type, ram, cpu?
Is your CPU maxed at one core?
What is your internet type? and latency?
Please also restart the client with -debug and -printstakemodifier and -printcreation and -printcoinstake
Let it run for a bit get a few good stakes or orphans, then please zip up the debug.log and put it somewhere for me to look at. You can PM me the location or post here.
Sorry about the trouble. I will do my best to get to the bottom of it. This is the first I have heard of this problem
December 20, 2013, 11:05:18 AM
An update on the advertising campaign:
Our reddit advertising campaign began yesterday, we have advertising setup in the following subreddits: namecoin, peercoin, cryptocurrency, gpumining, and litecoin.
Our litecoin campaign has already been exhausted, and also is the most successful so far. For spending $12.30 we got 16,500 views and 224 clicks. Cryptsy volume went up from the 2-4BTC traded daily to just about 12.4 btc traded. These are huge results for such cheap advertising.
I would recommend chipping in a few coins so that we can re-up our litecoin section advertising. With such good results it would be a shame not to continue.
Please see the donation page on the website for wallet addresses. http://hobonickels.info/donate.html
Our reddit advertising campaign began yesterday, we have advertising setup in the following subreddits: namecoin, peercoin, cryptocurrency, gpumining, and litecoin.
Our litecoin campaign has already been exhausted, and also is the most successful so far. For spending $12.30 we got 16,500 views and 224 clicks. Cryptsy volume went up from the 2-4BTC traded daily to just about 12.4 btc traded. These are huge results for such cheap advertising.
I would recommend chipping in a few coins so that we can re-up our litecoin section advertising. With such good results it would be a shame not to continue.
Please see the donation page on the website for wallet addresses. http://hobonickels.info/donate.html
December 20, 2013, 09:18:58 AM
i am getting lot of stake orphans is this normal?
like i get 5-6 orphan stakes to get 1 that confirms
like i get 5-6 orphan stakes to get 1 that confirms
Normal maybe, but not acceptable. It should be 1 or 2 orphans for every 10 good ones. If you are getting that many orphans, that is usually caused by too many small stakes. It is best to combine the coins into larger batches. depending on how many coins you have I suggest 250-1000 coin batches. This can be easily done by creating a second wallet called wallet-stake.dat and sending coins to it.
i have my payments in 500-1000 batches in a second wallet if you remember we discussed this few pages back and i did as you recommended.
screenshot http://prntscr.com/2clcga
today all orphans
this is a screenshot of my payments http://prntscr.com/2clfz1
December 20, 2013, 08:13:56 AM
i am getting lot of stake orphans is this normal?
like i get 5-6 orphan stakes to get 1 that confirms
like i get 5-6 orphan stakes to get 1 that confirms
Normal maybe, but not acceptable. It should be 1 or 2 orphans for every 10 good ones. If you are getting that many orphans, that is usually caused by too many small stakes. It is best to combine the coins into larger batches. depending on how many coins you have I suggest 250-1000 coin batches. This can be easily done by creating a second wallet called wallet-stake.dat and sending coins to it.
December 20, 2013, 02:02:18 AM
i am getting lot of stake orphans is this normal?
like i get 5-6 orphan stakes to get 1 that confirms
like i get 5-6 orphan stakes to get 1 that confirms
Jump to: