Pages:
Author

Topic: How to get a 220-240 k-watt-meter in the usa - page 3. (Read 602 times)

e97
jr. member
Activity: 58
Merit: 1
February 01, 2018, 01:55:16 PM
#6
Here's a way better option IMO - buy one of these (Amazon Prime):

http://[Suspicious link removed]/2EwdI7K

buy a short C13 to C14 cable like this:

http://[Suspicious link removed]/2BLaM4d

Cut it in half, and wire it into the POW (super simple, I can take some pictures if people have any issues) - connect it to your WiFi, and voila!  You not only have a more accurate sensor than the kill-a-watt, greater load (16a instead of 13a), you can calibrate it to a known load, and it has live JSON output so you could log it if you are so inclined.  It's also tolerant from 90v to 250v, so you can run it on your normal household loads when you want, as well as the 240v ones.

I use these things all over the place, I think they're the best bang for the buck you can spend - plus it's a relay, so you can remotely reboot them.  Personally I reflash them with this firmware:

https://github.com/arendst/Sonoff-Tasmota

Which makes them even better - although I've modified mine to be more miner-friendly.

These look awesome!

How do you wire this for 240V?  The wiring diagram for the Sonoff shows L-N-G:



Household 240V has 2 lines on different phases and ground.

$17 on amazon, $10 on their official site. Hilarious.

official site ships from China so 2+ weeks shipping time vs 1-2 days with prime

$10.50 now + shipping

SF E-Parcel $3.28
Registered Air Mail $4.52
DHL Express $18.98

full member
Activity: 350
Merit: 100
February 01, 2018, 01:29:49 PM
#5
Here's a way better option IMO - buy one of these (Amazon Prime):

http://amzn.to/2EwdI7K

buy a short C13 to C14 cable like this:

http://amzn.to/2BLaM4d

Cut it in half, and wire it into the POW (super simple, I can take some pictures if people have any issues) - connect it to your WiFi, and voila!  You not only have a more accurate sensor than the kill-a-watt, greater load (16a instead of 13a), you can calibrate it to a known load, and it has live JSON output so you could log it if you are so inclined.  It's also tolerant from 90v to 250v, so you can run it on your normal household loads when you want, as well as the 240v ones.

I use these things all over the place, I think they're the best bang for the buck you can spend - plus it's a relay, so you can remotely reboot them.  Personally I reflash them with this firmware:

https://github.com/arendst/Sonoff-Tasmota

Which makes them even better - although I've modified mine to be more miner-friendly.

$17 on amazon, $10 on their official site. Hilarious.
hero member
Activity: 756
Merit: 560
February 01, 2018, 01:05:30 PM
#4
Standard USA spec Kill-A-Watts read 220v just fine. Just dont try to pull more than 8 amp through them.
hero member
Activity: 687
Merit: 511
February 01, 2018, 12:32:33 PM
#3
Here's a way better option IMO - buy one of these (Amazon Prime):

http://amzn.to/2EwdI7K

buy a short C13 to C14 cable like this:

http://amzn.to/2BLaM4d

Cut it in half, and wire it into the POW (super simple, I can take some pictures if people have any issues) - connect it to your WiFi, and voila!  You not only have a more accurate sensor than the kill-a-watt, greater load (16a instead of 13a), you can calibrate it to a known load, and it has live JSON output so you could log it if you are so inclined.  It's also tolerant from 90v to 250v, so you can run it on your normal household loads when you want, as well as the 240v ones.

I use these things all over the place, I think they're the best bang for the buck you can spend - plus it's a relay, so you can remotely reboot them.  Personally I reflash them with this firmware:

https://github.com/arendst/Sonoff-Tasmota

Which makes them even better - although I've modified mine to be more miner-friendly.
newbie
Activity: 17
Merit: 0
February 01, 2018, 12:14:31 PM
#2
Thank you for the post! I was wondering how 220/240V could be measured...

I've just been using my Fluke 323 Clamp Meter via the fuse panel.
Pages:
Jump to: