Topic: I was given a bunch of habaneros but... (Read 1325 times)
I tried Linux, URL changes, RESETS etc... I think this Habanero was a bit too HOT for it's own good.
Well I downloaded this last night as well and ran it as admin and then selected the option to list all devices and then proceeded to replace the driver for the M1 Device.
So after doing so it appears that bfgminer can no longer detect the device and cgminer (4.9.2) detects it as HFB / HFA hash fast device.. but again it doesn't seem to do anything after this, no errors nothing.
CGMiner Screenshot: https://onedrive.live.com/redir?resid=25C0C35F0E21EB15!407594&authkey=!AMGBNB9c9_JQAgs&v=3&ithint=photo%2cPNG
Edit: Fixed my URL, Sorry
So after doing so it appears that bfgminer can no longer detect the device and cgminer (4.9.2) detects it as HFB / HFA hash fast device.. but again it doesn't seem to do anything after this, no errors nothing.
CGMiner Screenshot: https://onedrive.live.com/redir?resid=25C0C35F0E21EB15!407594&authkey=!AMGBNB9c9_JQAgs&v=3&ithint=photo%2cPNG
Edit: Fixed my URL, Sorry
So you did fix stratum+tcp://stratum.bitcoin.cz:3333 ?
You also could try running it from a Live Linux Usb build, drivers usually aren't an issue then.
yea there are two resets. one of them worked for me.
look for 2 small buttons.... one is a reset. I bought one off ebay 6 months ago and the guy said it was dead. I got it for $35 shipped and I couldnt get the damn thing to run..... one late night I was going over the pcb with a flashlight and saw the buttons. I pressed the reset and the pc said new usb device and so i ran cgminer and boom it ran flawlessly. before the reset was pressed windows seemed to see the device and cgminer would act wierd but no hashing.
You know what is interesting? I do not think I managed to get mine even generating error messages until I pushed that button. However, I didn't may much attention to it. I will mess with it a little more tonight before I call it a loss.
Thanks brother!
look for 2 small buttons.... one is a reset. I bought one off ebay 6 months ago and the guy said it was dead. I got it for $35 shipped and I couldnt get the damn thing to run..... one late night I was going over the pcb with a flashlight and saw the buttons. I pressed the reset and the pc said new usb device and so i ran cgminer and boom it ran flawlessly. before the reset was pressed windows seemed to see the device and cgminer would act wierd but no hashing.
Ok this damn thing must be dead: https://onedrive.live.com/redir?resid=25C0C35F0E21EB15!407700&authkey=!AHZ0DstZehAzhoQ&v=3&ithint=photo%2cPNG
kind looks that way i looked at the thread and most of it was done non windows boxes for the pepper miner or from what i saw most got them running best on linux type boxes .
The original forum thread setup for this spoke about a tool they designed to check the cores etc... Does ANYONE have any of these tools backed up? Firmware etc?
one last question what bfg or cg miner command line are you using , some times not having the right conmans or full set in a line will make both software miners think there is no drivers for the hardware.
other wise
gl
Well let me grab a few of the commands I was testing and post them here. I even tried just running the miners and feeding in the URL etc after the fact
Also, thanks man! Appreciated
runing it the URL way in most cases won't find a driver unless you add something like
when it asks for a option i think.
-S all
that lone might find any driver needed if bfg lets says has it enable, I'm looking at the BFG read me to see whats on by default, i know BFG has support for that hardware but can't remember if that's one you have to enable and recompile so it is on . same in CFMINER, i like BFG more but both are very good software miners, I use both as needed.
here is a download link to those tools you asked about
https://bitbucket.org/gateway69/hf-tool/downloads
but it looks like you may need a ubuntu OS installed PC or non windows installed PC for most of those boards to work right or pI, cubieboard, or andriod controllers if you don't want a full blown PC running them etc
i may try to get few of those boards for fun to learn with .
So I don't mind firing up a linux box to do some more testing with this miner later tonight. As for those tools you posted, those are one of a few tools I am seeking. One tool specifically gives me a GUI representation of the card and displays the actual details from the ASICS. It was called the "pepper-miner-app" and was designed to run on Windows.
Let me try the linux deal tonight and get back to you.
Thanks!
The original forum thread setup for this spoke about a tool they designed to check the cores etc... Does ANYONE have any of these tools backed up? Firmware etc?
one last question what bfg or cg miner command line are you using , some times not having the right conmans or full set in a line will make both software miners think there is no drivers for the hardware.
other wise
gl
Well let me grab a few of the commands I was testing and post them here. I even tried just running the miners and feeding in the URL etc after the fact
Also, thanks man! Appreciated
runing it the URL way in most cases won't find a driver unless you add something like
when it asks for a option i think.
-S all
that lone might find any driver needed if bfg lets says has it enable, I'm looking at the BFG read me to see whats on by default, i know BFG has support for that hardware but can't remember if that's one you have to enable and recompile so it is on . same in CFMINER, i like BFG more but both are very good software miners, I use both as needed.
here is a download link to those tools you asked about
https://bitbucket.org/gateway69/hf-tool/downloads
but it looks like you may need a ubuntu OS installed PC or non windows installed PC for most of those boards to work right or pI, cubieboard, or andriod controllers if you don't want a full blown PC running them etc
i may try to get few of those boards for fun to learn with .
The original forum thread setup for this spoke about a tool they designed to check the cores etc... Does ANYONE have any of these tools backed up? Firmware etc?
one last question what bfg or cg miner command line are you using , some times not having the right conmans or full set in a line will make both software miners think there is no drivers for the hardware.
other wise
gl
Well let me grab a few of the commands I was testing and post them here. I even tried just running the miners and feeding in the URL etc after the fact.
Also, thanks man! Appreciated
The original forum thread setup for this spoke about a tool they designed to check the cores etc... Does ANYONE have any of these tools backed up? Firmware etc?
one last question what bfg or cg miner command line are you using , some times not having the right conmans or full set in a line will make both software miners think there is no drivers for the hardware.
other wise
gl
here is those other drivers i could only get it to work with grindseeds
http://www.st.com/web/en/catalog/tools/PF257938
http://www.st.com/web/en/catalog/tools/PF257938
The original forum thread setup for this spoke about a tool they designed to check the cores etc... Does ANYONE have any of these tools backed up? Firmware etc?
here it is
https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
there is one other driver but I'm almost sure that only works with gridseeds.
it's driver issue in windows or linex etc if bfg is complied wrong in linex you may need to redo a BFG to enable that support in BFG .
https://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
there is one other driver but I'm almost sure that only works with gridseeds.
it's driver issue in windows or linex etc if bfg is complied wrong in linex you may need to redo a BFG to enable that support in BFG .
Well I downloaded this last night as well and ran it as admin and then selected the option to list all devices and then proceeded to replace the driver for the M1 Device.
So after doing so it appears that bfgminer can no longer detect the device and cgminer (4.9.2) detects it as HFB / HFA hash fast device.. but again it doesn't seem to do anything after this, no errors nothing.
CGMiner Screenshot: https://onedrive.live.com/redir?resid=25C0C35F0E21EB15!407594&authkey=!AMGBNB9c9_JQAgs&v=3&ithint=photo%2cPNG
So after doing so it appears that bfgminer can no longer detect the device and cgminer (4.9.2) detects it as HFB / HFA hash fast device.. but again it doesn't seem to do anything after this, no errors nothing.
CGMiner Screenshot: https://onedrive.live.com/redir?resid=25C0C35F0E21EB15!407594&authkey=!AMGBNB9c9_JQAgs&v=3&ithint=photo%2cPNG
[fixed link]
Your one-drive link doesn't work for me.
Well I downloaded this last night as well and ran it as admin and then selected the option to list all devices and then proceeded to replace the driver for the M1 Device.
So after doing so it appears that bfgminer can no longer detect the device and cgminer (4.9.2) detects it as HFB / HFA hash fast device.. but again it doesn't seem to do anything after this, no errors nothing.
So after doing so it appears that bfgminer can no longer detect the device and cgminer (4.9.2) detects it as HFB / HFA hash fast device.. but again it doesn't seem to do anything after this, no errors nothing.
it's hard explain but for bfg you have uninstall it in windows then redo it etc for bfg there is another driver im looking for i haven't minded on a windows PC in very long time , sense i discovered using PI or cubieboards works a 100 % better they come with all the drivers needed , but you are having driver issue sadly and windows at least for me is not the best OS to run miners on , I love win 10 as my Main OS On my pC's after i turn off all the BS but for mining to me it's a waste .
Well I downloaded this last night as well and ran it as admin and then selected the option to list all devices and then proceeded to replace the driver for the M1 Device.
So after doing so it appears that bfgminer can no longer detect the device and cgminer (4.9.2) detects it as HFB / HFA hash fast device.. but again it doesn't seem to do anything after this, no errors nothing.
CGMiner Screenshot: https://onedrive.live.com/redir?resid=25C0C35F0E21EB15!407594&authkey=!AMGBNB9c9_JQAgs&v=3&ithint=photo%2cPNG
Edit: Fixed my URL, Sorry
So after doing so it appears that bfgminer can no longer detect the device and cgminer (4.9.2) detects it as HFB / HFA hash fast device.. but again it doesn't seem to do anything after this, no errors nothing.
CGMiner Screenshot: https://onedrive.live.com/redir?resid=25C0C35F0E21EB15!407594&authkey=!AMGBNB9c9_JQAgs&v=3&ithint=photo%2cPNG
Edit: Fixed my URL, Sorry
this should do it
http://zadig.akeo.ie/ you need those drivers for both CGMINER and BFGMINER with windows "_).
http://zadig.akeo.ie/ you need those drivers for both CGMINER and BFGMINER with windows "_).
Jump to: