Topic: Ice Fury (nano fury) support thread. - page 4. (Read 11857 times)

------------------------------------------------------------------------
bfgminer 3.9.0 configuration options summary
------------------------------------------------------------------------

  CFLAGS...............: -pthread -g -O2 -I/usr/include/libusb-1.0 -pthread -Ilibblkmaker -I/usr/include/hidapi
  LDFLAGS..............: -pthread -Llibblkmaker/.libs -Wl,-rpath,\$$ORIGIN/libblkmaker/.libs,-zorigin -lpthread -ldl -lcurl -ljansson -lncurses -ltinfo -lm -ludev -lusb-1.0 -lrt -lblkmaker_jansson-0.1 -lblkmaker-0.1
  Installation.prefix..: /usr/local

  Enabled..Drivers.....: avalon bifury bigpic bitforce bitfury_gpio cairnsmore erupter hashbuster hashbusterusb icarus klondike littlefury modminer nanofury twinfury x6500 ztex
  Disabled.Drivers.....: bfsb cpu knc metabank opencl proxy
    To enable proxy, install libmicrohttpd 0.9.5+ (getwork) or libevent 2.0.3+ (stratum)
  Enabled..Algorithms..: SHA256d
  Disabled.Algorithms..: scrypt
  Enabled..Options.....: libusb ncurses5
  Disabled.Options.....:

pi@raspberrypi ~/bfgminer $ uname -a
Linux raspberrypi 3.10.24+ #614 PREEMPT Thu Dec 19 20:38:42 GMT 2013 armv6l GNU/Linux

For startup I have tried using the --set-device as below and with just -S all, neither worked.

./bfgminer -o stratum+tcp://us1.eclipsemc.com:3333 -O user:pass -S all --set-device NFY:osc6_bits=52

Thanks again for the help.

IRQ, Can you post your command startup string?
Also can you confirm version of bfgminer & OS used , and output from configure to show the driver is enabled?

Please pm snoopy_nzl in regards to damaged units. He handles shipping.

I purchased 50 Units and 19 of them were damaged in shipping. Why were these not put in cases?

I have only one Ice Fury and one block eruptor. If I plug in the Ice fury alone bfgminer shows no devices, the error is shown only when the block eruptor is present.

Current sales are via group buy leads you can message me and I can connect you with one closest to you.

Hi Irq, Can you say how many you have attached? have you tried plugging in one USB miner (starting with Ice F)at a time? I have seen this error once a thresh-hold seems to get breached, which presents itself along the lines of a maximum number of devices per USB controller. ie on Windows 7 on single controller I get device manager "This device cannot start. (Code 10)"

On Ubuntu Bfgminer I have seen " mcp2210 lowlevel driver failed to open it " again when more than x devices are attached to a single USB controller, I spread devices around multiple hubs and plugged in different USB controller ports which allowed up to 48 devices to be seen.

Where are you selling these Beastlymac?

Also looking for help with my new Ice Fury. I've tried all suggested NanoFury configurations but still get errors when starting:

nanofury_lowl_probe: Matched "NanoFury NF1 v0.7" serial "0000093289", but mcp2210 lowlevel driver failed to open it

This is white PCB with 'iceFury' text on Raspbian with latest hidapi and bfgminer 3.9.0.

Appreciate any help with getting this running or at least identifying what the problem is.

Units from us are distinctive with name Ice fury on the PCB , White PCB and silver heatsink, made in New Zealand. I have been arranging purchase through group buy leads.

It seems like the drivers are having issues with large amounts of devices roughly 20+. I have notified Vs3

Have to agree they are a stud stick.  better then any of the other 1 chip bitfury sticks I am running 16 of them all at 54 overclock.

They range between 2.47 and 2.90

 I use 2  gearmo hubs


http://www.gearmo.com/shop/10-port-usb-3-hub-gm-3dh10/   with better quality power bricks.

I do have 1 question I can not seem to run more then 15 sticks on 1 pc using bfgminer.  but the 15 sticks do get me over  37.5 gh.  so I run 15 on 1 pc and 1 on another.

I've got two here, very happy with them.  One's running at 2.77GH and the other at 2.55GH - both at 54.  Running them on bfgminer 3.9.0, plugged in to a DLink 7-port.  Also work fine on an aluminium Anker 10-port USB3 hub.

They are coming from us. Not marto. Vs3 tweaked the design for us so that we would have better component availability.

In addition to the support topics you've got in mind, is there any chance you can share any background information on these please Beastlymac? I'm seeing a few around but no consistent story of where they're coming from, some are claiming they're you, some saying Technobit (marto). Do you know who's tweaked the design, what the changes are, and who is manufacturing/assembling/wholesale these?

Bfgminer.

Native support in bfgminer 3.5+

Current mining software that supports Ice Fury devices.

Bfgminer
Cgminer
Minepeon

Software being worked on.

Bitminter

Information will be updated here with support and setup information.