Op, i would chose vnish (awesome miner) as that lets you use the monitoring software without extra cost, since you will be overclocking the miners, you need something like that.
Also, be careful with the PSU rating, some profiles on those custom firmware require a custom PSU, the solder on those gears is bad so make sure the fluid you use is of a very high quality.
Like willi i am also interested.
Topic: Imersion cooling project - page 2. (Read 568 times)
Cool topic, can you share some photos and a DIY story if you are finish.
How much cost your setup if you are finish and your Asic Miner are Running?
Best regards
Willi
How much cost your setup if you are finish and your Asic Miner are Running?
Best regards
Willi
Just received the kit and will start putting it together with 8 T17+ inside.
Hello,
recently ordered a complete immersion cooling system from DCX https://cryptocooling.eu and waiting for delivery.
my plan is to fit 8 T17+ in there and upgrade their firmware to the max,
guys from DCX explained to me how to prep the ASICs for the immersion
and the firmware upgrades I am thinking are mskminer.com or Asic.to
as this is a first for me
would like to learn from people with experience on the subject
tips on prepping the machines to be immersed
and of course best or better firmware upgrades for immersed T17s
many thanks in advance
Jump to: