Pages:
Author

Topic: [INSTOCK] Flexible USB 3.0 Powered PCI-E 1x - 16x Risers! $6.99 Free Shipping! (Read 14759 times)

member
Activity: 110
Merit: 10
Saw this and wanted to ask if you intend to sell the usb style pcie risers in the future. Finding a reliable source for these has been dificult. I am in Washington State SW corner.
full member
Activity: 130
Merit: 100
full member
Activity: 130
Merit: 100
full member
Activity: 130
Merit: 100
full member
Activity: 130
Merit: 100
Daily Bump! $8.99 risers, best price and quality around!
full member
Activity: 130
Merit: 100
Daily Bump! $8.99 risers, best price and quality around!
full member
Activity: 130
Merit: 100
Bump! Still the best prices around!!
full member
Activity: 130
Merit: 100
Even lower prices! Starting at $8.99!!
full member
Activity: 130
Merit: 100
Bump - We still have the best prices with shipping around for high quality risers!
legendary
Activity: 1344
Merit: 1004
Ok so if the gpu doesnot have external power molex it takes power only from the sata connector?
So if I put 6 750 ti that draw 38w each from the sata connector the psu will fail even if it is 700w cause the gpus will only use the sata line and you can't provide 250 w from this line ? Am I right or not?

You need to connect the PCI-E power plugs to the video card in addition to the power plug on the riser PCB (floppy/molex/sata/whatever it is). It is required.

Most of the power will be pulled from the PCI-E power plugs. There are certain parts on the video card that need power from the PCI-E slot though (some 12v, some 3.3v which is taken from the 5v line and down-converted to 3.3v on the riser board). The power draw should not typically pull more than 75 watts; it will likely pull much less is most occasions, or maybe more, depending on what you are doing with your video card. Your best bet is use a multimeter to determine exactly how much power is being pulled through it. But there is no  way 250 watts is being pulled throug hit, because thats what the PCI-E power plugs are for.
full member
Activity: 130
Merit: 100
Ok so if the gpu doesnot have external power molex it takes power only from the sata connector?
So if I put 6 750 ti that draw 38w each from the sata connector the psu will fail even if it is 700w cause the gpus will only use the sata line and you can't provide 250 w from this line ? Am I right or not?

I believe it shouldn't be a problem but let me research a little about it to give you a definite answer.
hero member
Activity: 676
Merit: 500
Ok so if the gpu doesnot have external power molex it takes power only from the sata connector?
So if I put 6 750 ti that draw 38w each from the sata connector the psu will fail even if it is 700w cause the gpus will only use the sata line and you can't provide 250 w from this line ? Am I right or not?
full member
Activity: 130
Merit: 100
Does the USB risers power from the pci-e slot , cause when I put only the USB cable my gpu (750ti) would not power on. Only when I plug the sata molex then it starts? The gpu doesnot have a separate power molex and is only powered by the pciE slot. But on the riser it won't power on without the sata connector. Why?

USB Risers do not transfer any usable power through the USB cable. The GPU still needs power to turn on and that is provided by the SATA or Molex adapter connected to the 16x riser.
hero member
Activity: 676
Merit: 500
Does the USB risers power from the pci-e slot , cause when I put only the USB cable my gpu (750ti) would not power on. Only when I plug the sata molex then it starts? The gpu doesnot have a separate power molex and is only powered by the pciE slot. But on the riser it won't power on without the sata connector. Why?
full member
Activity: 130
Merit: 100
PRICES SLASHED!

We have the best prices around with free fast shipping! We stock only the highest quality risers, feel free to compare ours the competition, it doesn't get any better than PoweredRisers.com
full member
Activity: 130
Merit: 100
NEW LOW PRICE FOR OUR USB RISERS! ONLY $10.79 PER RISER!! We don't advertise low prices and charge outrageous shipping fees!
full member
Activity: 130
Merit: 100
Cutoff time today is 8PM PST! Use couponcode "BITCOINTALK" to get 10% off your order!!
full member
Activity: 130
Merit: 100
A photo of my rig running 6 of these

http://files.idatasys.net/IMG_1240.JPG

I have two rigs running in this configuration (plus technically a third rig, which I sold to a friend also running with 6 risers)

Another photo showing the rigs in the "standing up" position:
http://files.idatasys.net/IMG_1251.JPG

That is a pretty sweet looking case! Did you design the case yourself?
Pages:
Jump to: