[INSTOCK] Flexible USB 3.0 Powered PCI-E 1x - 16x Risers! $6.99 Free Shipping! - page 3.

httpcore

full member

Activity: 130

Merit: 100

I've received a lot of questions on how the Dual PSU Adapter works, here is a quick summary,

You plug the 2nd PSU into the 24pin ATX and a SATA cable from the first power supply. Once you turn on the first power supply, the 2nd one will turn on automatically, it will also power off at the same time.

httpcore

full member

Activity: 130

Merit: 100

Quote from: hoodlikegaza on February 23, 2014, 01:58:16 PM

it's not obvious from the picture of the slim riser. Where does the power cable plug into? I only see the usb connector on the actual riser.

The power cable plugs right underneath the USB Connector. Let me know if you have any questions. While most of our competition sell pre-orders, all products listed on our site are INSTOCK and ready to ship! Most orders are shipped within 24 hours, however most of the time they're shipped the same day if placed before 9PM PST.

hoodlikegaza

newbie

Activity: 31

Merit: 0

it's not obvious from the picture of the slim riser. Where does the power cable plug into? I only see the usb connector on the actual riser.

httpcore

full member

Activity: 130

Merit: 100

Quote from: dogeisbest on February 22, 2014, 04:53:29 PM

Wow... that is a lot of cables. Could you tell me the difference between the wide and slim risers you're selling?

The slim boards have two power filters and the wide have three. However, it's up to personal / visual preference. I use both type of risers in my setups. They've been running great!

Let me know if you have any questions.

dogeisbest

newbie

Activity: 1

Merit: 0

Wow... that is a lot of cables. Could you tell me the difference between the wide and slim risers you're selling?

httpcore

full member

Activity: 130

Merit: 100

Interested in buying with Bitcoin? Are you an international buyer? Well we're accepting Bitcoin on our website (for all domestic + international orders) and we now ship to the following countries

United Kingdom
Canada
Australia
Belgium
Brazil
Denmark
France
Germany
Ireland
Israel
Spain
Sweden
Switzerland

Let me know if you don't see your country on their and we can add it!

Many people ask us if we have any inventory... well here is our weekly inventory shipment

httpcore

full member

Activity: 130

Merit: 100

Quote from: Dogebear on February 13, 2014, 10:06:45 PM

what does qc 100% mean exactly? sorry new to this =[ lol how does that compare with the three(the fat ones) i bought from you? do i need to rebuy new ones? also for the current ones i own do i have to take off the soft foam on the bottom or do i leave them on?

We're changing all our risers to 100% QC test for all future batches. Most of the time risers either work on the first try or they don't work at all. In order to avoid any RMAs since they're costly in terms of customer time, shipping cost and replacement parts, we decided to QC 85-100% of all risers. We have a low percentage of RMAs, less than 2%. If your risers work, then there is no reason to RMA.

You should keep the foam on the bottom of the risers.

Our shipments have been delayed by customs and will not come until the middle of next week. Due to the high demand, I will setup a preorder page, and items will ship at the latest the 22nd. I will keep prices the same, but after this next batch of 1000 units prices will go up a tad bit.

Dogebear

newbie

Activity: 27

Merit: 0

what does qc 100% mean exactly? sorry new to this =[ lol how does that compare with the three(the fat ones) i bought from you? do i need to rebuy new ones? also for the current ones i own do i have to take off the soft foam on the bottom or do i leave them on?

httpcore

full member

Activity: 130

Merit: 100

We will be receiving a small batch of risers that will be for sale on Sunday.

New risers will have a yellow connector instead of blue. We will have 50,60 and 100cm risers instock. We've also upgraded our QC process to QC 100% of all our risers!

Please contact me if you have any questions or concerns.

httpcore

full member

Activity: 130

Merit: 100

Quote from: XZed on February 05, 2014, 03:38:24 PM

Hello all,
Sorry to post it here but can't find support anywhere else for this problem....

Indeed, I bought the model shown in the first post, to a local supplier (that bought where ?).

I didn't manage to put more than 2 GPU on the mining rig, with such risers...

As soon as I put 3 of them, mining irg either shutdowns immediately after starting ming or shutdowns after a few minutes...

I tried multiples configurations, add an extra PSU, etc...

The problem really seems related to use of USB risers...

Testing configuration :

Asrock H61 Pro BTC
Intel G1620
4Go RAM
4x VTX 280x
Lepa 1600W
BAMT

Can't find any feedback about such risers.... So, can't define if functioning is approved...or not...

BUT, I found this thread describing the SAME problem... :

http://forum.feathercoin.com/index.php/topic,7322.msg56082.html#msg56082

Thank you for any help...

Sorry to OP to post it in a "commercial" thread...

Sincerely,

It sounds a configuration issue or a defective 1x PCI-E card. Do all three cards work in 2 configuration?

XZed

sr. member

Activity: 309

Merit: 250

Hello all,
Sorry to post it here but can't find support anywhere else for this problem....

Indeed, I bought the model shown in the first post, to a local supplier (that bought where ?).

I didn't manage to put more than 2 GPU on the mining rig, with such risers...

As soon as I put 3 of them, mining irg either shutdowns immediately after starting ming or shutdowns after a few minutes...

I tried multiples configurations, add an extra PSU, etc...

The problem really seems related to use of USB risers...

Testing configuration :

Asrock H61 Pro BTC
Intel G1620
4Go RAM
4x VTX 280x
Lepa 1600W
BAMT

Can't find any feedback about such risers.... So, can't define if functioning is approved...or not...

BUT, I found this thread describing the SAME problem... :

http://forum.feathercoin.com/index.php/topic,7322.msg56082.html#msg56082

Thank you for any help...

Sorry to OP to post it in a "commercial" thread...

Sincerely,

dethdeks

full member

Activity: 206

Merit: 100

got my order today. well packaged. will do business again

httpcore

full member

Activity: 130

Merit: 100

Quote from: flowdoge on February 03, 2014, 04:32:44 PM

I received my order today, very fast shipping! Thank you.

Sounds good! I will be offering more risers by the end of next week! Limited quantities!

flowdoge

newbie

Activity: 6

Merit: 0

I received my order today, very fast shipping! Thank you.

httpcore

full member

Activity: 130

Merit: 100

It appears my inventory system needs to be worked on. We took in more orders than we can fulfill. I'll be sending a message to anyone affected by this. We will issue a refund immediately and offer a huge discount for our next shipment (basically at cost).

EDIT: 2/3/14 - We will receive more inventory towards the end of the month. We've learned a lot over the past few weeks and will be implementing some changes in our ordering and manufacturing process. Stay tuned!

Please PM me if you have any questions.

wobbzz

full member

Activity: 135

Merit: 100

Looking for 12 if you can release the RMA stock. Thanks!

httpcore

full member

Activity: 130

Merit: 100

Quote from: PerplexedMiner on January 31, 2014, 02:34:53 PM

Darn, just missed the cutoff. Subscribed for when you get more in stock.

edit: care to make a "wait" list for those of us interested in your bundle reserved for RMA purposes?

Yup, we can do that. Just post here or PM me with your desired amount and I will work on a first come, first serve basis.

PerplexedMiner

newbie

Activity: 1

Merit: 0

Darn, just missed the cutoff. Subscribed for when you get more in stock.

edit: care to make a "wait" list for those of us interested in your bundle reserved for RMA purposes?

httpcore

full member

Activity: 130

Merit: 100

We're out of stock! I've saved about 20-30 risers for RMA purposes. If there are no RMAs within the next week, these risers will go on sale.

Thanks guys! You can expect more inventory towards the end of February / start of March.

httpcore

full member

Activity: 130

Merit: 100

Quote from: nwfella on January 31, 2014, 03:38:44 AM

Interested in picking up 5x to try out. E-mail and PM both sent

*Who say's redundancy isn't a good thing?

Hah! Will reply to you within the next hour. All orders will be processed and shipped out tomorrow morning. Replies will take approx. 1-2 hours.

Topic: [INSTOCK] Flexible USB 3.0 Powered PCI-E 1x - 16x Risers! $6.99 Free Shipping! - page 3. (Read 14759 times)