Author

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1002. (Read 5352429 times)

hero member
Activity: 658
Merit: 500
Visualize whirledps

It needs to be rather strong to get the dust out of the middle of the miner.  Just remove the two fans and goto town on it. Blow from both sides. I didn't have to remove the case or anything.  I blew straight 110psi thru them(prolly overkill).  Dust went everywhere. Used one of those blow guns with a reduced tip. Hard to say what the pressure is coming out the end.  Happy Easter everyone

BR

I will pull all the boards out and clean out / blow out each board individually to get into all the crooks and crannies. No worries about taking them apart as the warranty is long gone. Wink

We have something like this at work:

hero member
Activity: 658
Merit: 500
Visualize whirledps
Man, I'm loving all that GREEN on the Block Statistics table!  Cheesy Cheesy
legendary
Activity: 1736
Merit: 1032
Carl, aka Sonny :)
Block! by BlockBadger Smiley
S9v2 (prolly a T9)
and 3 payouts Smiley

A good start to BLOCK MONDAY! Cheesy
hero member
Activity: 1610
Merit: 538
I'm in BTC XTC
It really IS a blockalanche!!!   Cheesy
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
Block! by BlockBadger Smiley
S9v2 (prolly a T9)
and 3 payouts Smiley
legendary
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks

Mine ran for about 6 months. Pulling in outside air pollen moths:) etc.  when temps rose above 70 they would push close to 80c board temp. I pulled them offline. Blew them out.  You wouldn't believe the dust bunnies inside them.  Now I've got them oc to 575 and 85 f they made it to 60c board temp.  I feel they will be good up to 90-95 before I need to clock them back down. Def want to get some compressed air and get them clean.

BR

Yes, mine are definitely past due for a good cleaning. We have one of those electric computer blowers for electronic devices at work. We use it to blow out dust and cobwebs from computers and case. I keep meaning to bring it home one weekend when I can get motivated to tear down four S9's one by one and clean them thoroughly.

That blower works 100 times better than canned air. I guess an air compressor and hose would work just as well. Just have to be careful not to damage anything with a very strong blast of air. Smiley

I'm sure it will lower my temps and add a little more longevity to the miners.

It needs to be rather strong to get the dust out of the middle of the miner.  Just remove the two fans and goto town on it. Blow from both sides. I didn't have to remove the case or anything.  I blew straight 110psi thru them(prolly overkill).  Dust went everywhere. Used one of those blow guns with a reduced tip. Hard to say what the pressure is coming out the end.  Happy Easter everyone

BR
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
Happy Easter to all guys!  God has heard our Block prayers this month!  Smiley
Yes She has Smiley
hero member
Activity: 1092
Merit: 552
Retired IRCX God
...That blower works 100 times better than canned air. I guess an air compressor and hose would work just as well. Just have to be careful not to damage anything with a very strong blast of air.....
We started with one of these (eventually got a bigger tank for more rigs):
     and one of these     
Set @ 30PSI for regular scheduled cleaning and 60PSI for times when the whole rig is torn down and "deep cleaned".
hero member
Activity: 658
Merit: 500
Visualize whirledps

Mine ran for about 6 months. Pulling in outside air pollen moths:) etc.  when temps rose above 70 they would push close to 80c board temp. I pulled them offline. Blew them out.  You wouldn't believe the dust bunnies inside them.  Now I've got them oc to 575 and 85 f they made it to 60c board temp.  I feel they will be good up to 90-95 before I need to clock them back down. Def want to get some compressed air and get them clean.

BR

Yes, mine are definitely past due for a good cleaning. We have one of those electric computer blowers for electronic devices at work. We use it to blow out dust and cobwebs from computers and case. I keep meaning to bring it home one weekend when I can get motivated to tear down four S9's one by one and clean them thoroughly.

That blower works 100 times better than canned air. I guess an air compressor and hose would work just as well. Just have to be careful not to damage anything with a very strong blast of air. Smiley

I'm sure it will lower my temps and add a little more longevity to the miners.
sr. member
Activity: 508
Merit: 250
Happy Easter to all guys!  God has heard our Block prayers this month!  Smiley
legendary
Activity: 4634
Merit: 1851
Linux since 1997 RedHat 4
Heh, nice to wake up to 2 more after an awse day already Smiley
cobramining with an A7v2
and blockmines with an S9v2
legendary
Activity: 1453
Merit: 1011
Bitcoin Talks Bullshit Walks

why need to under clock when the temp just 76'f /25'c  Roll Eyes still much lower from antminer spec under 40'c

Because I have four S9's in a small spare bedroom. Two fans pull in outside air onto the miner air intakes. Another fan is for exhaust.
When the outside air temp get's to be 75F and hotter, the miner chip temps start to get hot - over 97-103C. I don't like them running that hot so I turn the frequency down so that the chip temps stay in the mid 90's C.

EDIT: They all also need a good cleaning. So I need to take them off-line one by one and disassemble them blowing out dust and cleaning the fans. I'm sure that will lower my temps by about 5C. I just have to find the time.

Mine ran for about 6 months. Pulling in outside air pollen moths:) etc.  when temps rose above 70 they would push close to 80c board temp. I pulled them offline. Blew them out.  You wouldn't believe the dust bunnies inside them.  Now I've got them oc to 575 and 85 f they made it to 60c board temp.  I feel they will be good up to 90-95 before I need to clock them back down. Def want to get some compressed air and get them clean.

BR
legendary
Activity: 4354
Merit: 9201
'The right to privacy matters'
The first half of April certainly has been kind to us! Let's hope the second half will be just as profitable!!  Cheesy Cheesy Cheesy Cheesy Cheesy
Let's make it six!!!

COMEONBLOCKSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!!  Grin Grin Grin Grin Grin Grin

six is even   lets go for it.
hero member
Activity: 658
Merit: 500
Visualize whirledps
The first half of April certainly has been kind to us! Let's hope the second half will be just as profitable!!  Cheesy Cheesy Cheesy Cheesy Cheesy
Let's make it six!!!

COMEONBLOCKSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!!  Grin Grin Grin Grin Grin Grin
member
Activity: 85
Merit: 10
legendary
Activity: 1736
Merit: 1032
Carl, aka Sonny :)
hero member
Activity: 658
Merit: 500
Visualize whirledps
Block! Smiley

Takes me back to the "olden days" of 6 block days! Smiley LOL
hero member
Activity: 658
Merit: 500
Visualize whirledps
four blocks in the oven.  nice

lets get a block five

I concur!  Grin  Grin  Grin  Grin  Grin

COMEONBLOCKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!!!!!!!!!!!!!!  Cheesy Cheesy Cheesy Cheesy Cheesy
legendary
Activity: 4354
Merit: 9201
'The right to privacy matters'
four blocks in the oven.  nice

lets get a block five
legendary
Activity: 1736
Merit: 1032
Carl, aka Sonny :)
Block by cobramining!  That is number 4 on this BLOCK SUNDAY!

Sweet! Smiley

Looks like Kano finally passed out!  Smiley

Haha!  Even Kano has to sleep sometime! Grin
Jump to: