Author

Topic: KanoPool kano.is lowest 0.9% fee 🐈 since 2014 - Worldwide - 2432 blocks - page 1689. (Read 5352527 times)

legendary
Activity: 1302
Merit: 1068
The pool hashrate is increasing over that period.  The pool hashrate goes up, your hashrate stays the same, your percentage of the block goes down proportionally.

The pool hashrate goes up, we find more blocks, you get paid more often, but a smaller amount.

The pool continues to have awesome luck, you make more here than other unluckier pools.

I was talking about my N avg, I don't know if you can see the imagen on my post.

Go to Worker -> Shift Graph. I'm guessing you'll see a downtime where your miner was not mining at Kano. Thus your average N over 2 days will have dropped?
full member
Activity: 186
Merit: 100
The pool hashrate is increasing over that period.  The pool hashrate goes up, your hashrate stays the same, your percentage of the block goes down proportionally.

The pool hashrate goes up, we find more blocks, you get paid more often, but a smaller amount.

The pool continues to have awesome luck, you make more here than other unluckier pools.

I was talking about my N avg, I don't know if you can see the imagen on my post.
hero member
Activity: 615
Merit: 500
Hey people, have a doubt. Right now I have one SP20 pointed to the pool, but my N avg is going down since two days ago, don't know why. According to the stats page the sp is mining right, and my hourly avg looks as should.

I appreciate all help.

The pool hashrate is increasing over that period.  The pool hashrate goes up, your hashrate stays the same, your percentage of the block goes down proportionally.

The pool hashrate goes up, we find more blocks, you get paid more often, but a smaller amount.

The pool continues to have awesome luck, you make more here than other unluckier pools.
legendary
Activity: 4382
Merit: 9330
'The right to privacy matters'
Check that out, we are number 6 on the network for 24H period and above Slush! Great that based on block counts we should have 55PH




Pool                 HashShare   Hash Rate     Blocks Found Empty Blocks Percentage Avg. Block Size(Bytes)   Avg. Tx(BTC)
0   NETWORK   100.00 %   1,107.39 PH/s   119   4.20 %   901,520   0.38196836   1.53 %
1   AntPool   22.69 %   251.26 PH/s   27   7.41 %   805,370   0.32275525   1.29 %
2   F2Pool   21.01 %   232.65 PH/s   25   8.00 %   910,265   0.42064398   1.68 %
3   BTCC   15.97 %   176.81 PH/s   19   0.00 %   964,318   0.44387037   1.78 %
4   BitFury   13.45 %   148.89 PH/s   16   0.00 %   996,204   0.35395369   1.42 %
5   BW.COM   10.08 %   111.67 PH/s   12   0.00 %   893,827   0.40977047   1.64 %
6   Kano CK   5.04 %   55.83 PH/s   6   0.00 %   987,970   0.39301422   1.57 %
7   Slush   5.04 %   55.83 PH/s   6   0.00 %   838,346   0.40857015   1.63 %
8   21 Inc.   2.52 %   27.92 PH/s   3   0.00 %   998,161   0.30599552   1.22 %
9   BitClub   1.68 %   18.61 PH/s   2   0.00 %   998,081   0.34156527   1.37 %
10   KnCMiner   1.68 %   18.61 PH/s   2   0.00 %   920,037   0.39953943   1.60 %
11   Eligius   0.84 %   9.31 PH/s   1   100.00 %   3,476   0.00000000   0.00 %

Just think if we were actually running 55ph, we would be getting crazy blocks.

I so want this pool to be at 5%.
hero member
Activity: 770
Merit: 523
Check that out, we are number 6 on the network for 24H period and above Slush! Great that based on block counts we should have 55PH




Pool                 HashShare   Hash Rate     Blocks Found Empty Blocks Percentage Avg. Block Size(Bytes)   Avg. Tx(BTC)
0   NETWORK   100.00 %   1,107.39 PH/s   119   4.20 %   901,520   0.38196836   1.53 %
1   AntPool   22.69 %   251.26 PH/s   27   7.41 %   805,370   0.32275525   1.29 %
2   F2Pool   21.01 %   232.65 PH/s   25   8.00 %   910,265   0.42064398   1.68 %
3   BTCC   15.97 %   176.81 PH/s   19   0.00 %   964,318   0.44387037   1.78 %
4   BitFury   13.45 %   148.89 PH/s   16   0.00 %   996,204   0.35395369   1.42 %
5   BW.COM   10.08 %   111.67 PH/s   12   0.00 %   893,827   0.40977047   1.64 %
6   Kano CK   5.04 %   55.83 PH/s   6   0.00 %   987,970   0.39301422   1.57 %
7   Slush   5.04 %   55.83 PH/s   6   0.00 %   838,346   0.40857015   1.63 %
8   21 Inc.   2.52 %   27.92 PH/s   3   0.00 %   998,161   0.30599552   1.22 %
9   BitClub   1.68 %   18.61 PH/s   2   0.00 %   998,081   0.34156527   1.37 %
10   KnCMiner   1.68 %   18.61 PH/s   2   0.00 %   920,037   0.39953943   1.60 %
11   Eligius   0.84 %   9.31 PH/s   1   100.00 %   3,476   0.00000000   0.00 %

Just think if we were actually running 55ph, we would be getting crazy blocks.
hero member
Activity: 770
Merit: 523
Hey guys, i'm putting my kano.is password in the cgminer configuration and is working good, why i should put the "x" instead of my real password? It's more risky?

You never want to use your account password in the cgminer configuration!  The reason it works is because anything will work.  Change it to x or something like 123 or anything but your real password asap!

Edit:  I see everyone has already told you this...using your real password is dangerous!
And now that you have had it in the clear you should change your password.
legendary
Activity: 1736
Merit: 1032
Carl, aka Sonny :)
Hey guys, i'm putting my kano.is password in the cgminer configuration and is working good, why i should put the "x" instead of my real password? It's more risky?

You never want to use your account password in the cgminer configuration!  The reason it works is because anything will work.  Change it to x or something like 123 or anything but your real password asap!

Edit:  I see everyone has already told you this...using your real password is dangerous!
full member
Activity: 186
Merit: 100
Hey people, have a doubt. Right now I have one SP20 pointed to the pool, but my N avg is going down since two days ago, don't know why. According to the stats page the sp is mining right, and my hourly avg looks as should.



I appreciate all help.
hero member
Activity: 575
Merit: 500
Check that out, we are number 6 on the network for 24H period and above Slush! Great that based on block counts we should have 55PH




Pool                 HashShare   Hash Rate     Blocks Found Empty Blocks Percentage Avg. Block Size(Bytes)   Avg. Tx(BTC)
0   NETWORK   100.00 %   1,107.39 PH/s   119   4.20 %   901,520   0.38196836   1.53 %
1   AntPool   22.69 %   251.26 PH/s   27   7.41 %   805,370   0.32275525   1.29 %
2   F2Pool   21.01 %   232.65 PH/s   25   8.00 %   910,265   0.42064398   1.68 %
3   BTCC   15.97 %   176.81 PH/s   19   0.00 %   964,318   0.44387037   1.78 %
4   BitFury   13.45 %   148.89 PH/s   16   0.00 %   996,204   0.35395369   1.42 %
5   BW.COM   10.08 %   111.67 PH/s   12   0.00 %   893,827   0.40977047   1.64 %
6   Kano CK   5.04 %   55.83 PH/s   6   0.00 %   987,970   0.39301422   1.57 %
7   Slush   5.04 %   55.83 PH/s   6   0.00 %   838,346   0.40857015   1.63 %
8   21 Inc.   2.52 %   27.92 PH/s   3   0.00 %   998,161   0.30599552   1.22 %
9   BitClub   1.68 %   18.61 PH/s   2   0.00 %   998,081   0.34156527   1.37 %
10   KnCMiner   1.68 %   18.61 PH/s   2   0.00 %   920,037   0.39953943   1.60 %
11   Eligius   0.84 %   9.31 PH/s   1   100.00 %   3,476   0.00000000   0.00 %
hero member
Activity: 575
Merit: 500
Hey guys, i'm putting my kano.is password in the cgminer configuration and is working good, why i should put the "x" instead of my real password? It's more risky?

never use your real password. period. The miner config password field can be anything, I use 123 and xxx. All pools I know of don't require anything in the password field. Why risk it?
legendary
Activity: 1638
Merit: 1005
Hey guys, i'm putting my kano.is password in the cgminer configuration and is working good, why i should put the "x" instead of my real password? It's more risky?

don't use your account's password for a worker ... it doesn't required one. Just put "x" like the example.

From the first page information

Quote
Mining configuration:
Go to https://www.kano.is and register a username to mine with, by clicking on the Register/Reset button,
or mine directly to the pool without registering, using a bitcoin payment address as your username.
No password is required.

your password is only needed to access your web page account and should be not use for anything else.
hero member
Activity: 756
Merit: 500
Hire me! Spanish translator and community manager!
Hey guys, i'm putting my kano.is password in the cgminer configuration and is working good, why i should put the "x" instead of my real password? It's more risky?
sr. member
Activity: 294
Merit: 250
Nice to see all these blocks. My retirement fund (the coffee can in the closet) is happy-happy.

Ubuntu just pushed an update for Bitcoin Core...Bitcoin Core version v0.12.0.0-g188ca9c (64-bit). Seems to be fine when restarted. If anyone's got comments on that, you can maybe PM me to save space here. Just don't want any blindsides.

Nothing crazy.  Just an update to 0.12.0.  It's been out a few days already.

If you want to know what was included in the upgrade you can find the info here:

https://bitcoin.org/en/release/v0.12.0
hero member
Activity: 1610
Merit: 538
I'm in BTC XTC
Definitely a Block Wednesday!  Cheers to fer 'fer' cracking the latest block!  Love seeing so many blocks maturing to payout!  Wink
legendary
Activity: 952
Merit: 1003
Nice to see all these blocks. My retirement fund (the coffee can in the closet) is happy-happy.

Ubuntu just pushed an update for Bitcoin Core...Bitcoin Core version v0.12.0.0-g188ca9c (64-bit). Seems to be fine when restarted. If anyone's got comments on that, you can maybe PM me to save space here. Just don't want any blindsides.
hero member
Activity: 770
Merit: 523
hero member
Activity: 770
Merit: 523
After signing up with kano I can quickly and easily see the pool side hashrate under the workers->workers tab.
Sometimes the miner side hashrate will show OK but the poolside will show a bit low.
On my s7's I can detect if one hashboard is wonky that the miner side does not show.
On the miner side I have seen a hashboard run at 20c when it should have been at 45c and the hashrate is fine.
Nice thing is it is fixed with a reboot and not a power cycle.
newbie
Activity: 48
Merit: 0
What would setting S3+ difficulty look like with just an address? do I add it to worker or password? I'm sorry if it has been posted before I did make an effort to look for it, but there's so much to read through.

Go to https://www.kano.is, all the directions are right there, easy to read and follow what to do.

To mine your S3+ to just and address, use the following in the miner config page:
stratum+tcp://stratum.kano.is:3333
{your BTC address here}_{any worker name here}
x

You cannot configure difficulty if you only mine to an address and really there is no need, especially with just an S3+, the pool will adjust it for you.


honestly your better of just signing up with a user name. Everything become so much simpler to use and more stats are available with a user name vs btc address.

+1 to that.

Register and create a username vs. just your BTC addy. But, concerning setting the diff...let the vardiff do that for you. It really is the best way. I am mining with 2xS3plus. Works fine.

CapnBDL
     Cool

Big thanks to you all!
hero member
Activity: 1064
Merit: 500
MOBU
What would setting S3+ difficulty look like with just an address? do I add it to worker or password? I'm sorry if it has been posted before I did make an effort to look for it, but there's so much to read through.

Go to https://www.kano.is, all the directions are right there, easy to read and follow what to do.

To mine your S3+ to just and address, use the following in the miner config page:
stratum+tcp://stratum.kano.is:3333
{your BTC address here}_{any worker name here}
x

You cannot configure difficulty if you only mine to an address and really there is no need, especially with just an S3+, the pool will adjust it for you.


honestly your better of just signing up with a user name. Everything become so much simpler to use and more stats are available with a user name vs btc address.

+1 to that.

Register and create a username vs. just your BTC addy. But, concerning setting the diff...let the vardiff do that for you. It really is the best way. I am mining with 2xS3plus. Works fine.

CapnBDL
     Cool
sr. member
Activity: 266
Merit: 250
What would setting S3+ difficulty look like with just an address? do I add it to worker or password? I'm sorry if it has been posted before I did make an effort to look for it, but there's so much to read through.

Go to https://www.kano.is, all the directions are right there, easy to read and follow what to do.

To mine your S3+ to just and address, use the following in the miner config page:
stratum+tcp://stratum.kano.is:3333
{your BTC address here}_{any worker name here}
x

You cannot configure difficulty if you only mine to an address and really there is no need, especially with just an S3+, the pool will adjust it for you.


honestly your better of just signing up with a user name. Everything become so much simpler to use and more stats are available with a user name vs btc address.
Jump to: