Forgive for my newb question
Why would my average pay outs for 24 hours consistently be less then what I should be getting If I were just mining LTC?
I thought multi-pools were slightly more profitable...
FYI I am running 10 L3+ miners and getting about 2 LTC a day on average yet LTC difficulty has been down and has been sitting between 2.4 and 3 a day for pay out (mostly). if you were to just mine LTC. I would think that the multi-port pool would switch to LTC if it is more profitable. That being said, my payouts with 10 miners should be over 2 LTC.
What gives?
Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 145. (Read 279744 times)
November 07, 2017, 04:18:14 AM
November 07, 2017, 04:04:28 AM
Crackfoo,
Please give your BTC wallet a kick !
Payout stalled again.
46m ago 0.00227227 ...
Please give your BTC wallet a kick !
Payout stalled again.
46m ago 0.00227227 ...
Look at how well the blockchain is moving... and diff....
This is the new and improved BTC apparently....
I guess after the fork it will get much worse. Fees are going to skyrocket also.
Crackfoo, what are your plans/thoughts regarding the war that is about to start on 14th?
It's only a suggestion! But perhaps an idea to think about doing payouts in a different currency, for instance LTC or Dash?
Just for avoiding those tx-high fees
November 07, 2017, 01:55:19 AM
Worker names go in your password:
Worker1,c=BTC
worker2,c=BTC
Worker1,c=BTC
worker2,c=BTC
Thank you.
I see zpool x11 not much profitable. How max you earn with D3 per day?
November 07, 2017, 12:34:07 AM
is UNO mining available on the pool?
I see this page but don't see any other references on the site for being able to mine UNO
https://www.zpool.ca/site/block?id=485
I see this page but don't see any other references on the site for being able to mine UNO
https://www.zpool.ca/site/block?id=485
crackfoo, can you please confirm?
November 06, 2017, 10:38:25 PM
Crackfoo,
Please give your BTC wallet a kick !
Payout stalled again.
46m ago 0.00227227 ...
Please give your BTC wallet a kick !
Payout stalled again.
46m ago 0.00227227 ...
Look at how well the blockchain is moving... and diff....
This is the new and improved BTC apparently....
I guess after the fork it will get much worse. Fees are going to skyrocket also.
Crackfoo, what are your plans/thoughts regarding the war that is about to start on 14th?
November 06, 2017, 10:13:07 PM
Something is wrong with m7m...
November 06, 2017, 05:27:11 PM
Worker names go in your password:
Worker1,c=BTC
worker2,c=BTC
Worker1,c=BTC
worker2,c=BTC
November 06, 2017, 05:21:40 PM
D3 has it's own fields, just put host in host, BTC address in worker and password as c=BTC.
URL: stratum+tcp://x11.mine.zpool.ca:3533#xnsub
User: your BTC address
Password: c=BTC
URL: stratum+tcp://x11.mine.zpool.ca:3533#xnsub
User: your BTC address
Password: c=BTC
Thank you, very much. And how set worker id?
I mean Antminer worker id.
My AddresBTC.worker1 name not work.
When one my RIG offline, I need know see in table.
November 06, 2017, 05:14:51 PM
D3 has it's own fields, just put host in host, BTC address in worker and password as c=BTC.
URL: stratum+tcp://x11.mine.zpool.ca:3533#xnsub
User: your BTC address
Password: c=BTC
URL: stratum+tcp://x11.mine.zpool.ca:3533#xnsub
User: your BTC address
Password: c=BTC
Thank you, very much. And how set worker id?
November 06, 2017, 05:09:18 PM
D3 has it's own fields, just put host in host, BTC address in worker and password as c=BTC.
URL: stratum+tcp://x11.mine.zpool.ca:3533#xnsub
User: your BTC address
Password: c=BTC
URL: stratum+tcp://x11.mine.zpool.ca:3533#xnsub
User: your BTC address
Password: c=BTC
Thank you, very much. And how set worker id?
November 06, 2017, 04:43:05 PM
D3 has it's own fields, just put host in host, BTC address in worker and password as c=BTC.
URL: stratum+tcp://x11.mine.zpool.ca:3533#xnsub
User: your BTC address
Password: c=BTC
URL: stratum+tcp://x11.mine.zpool.ca:3533#xnsub
User: your BTC address
Password: c=BTC
November 06, 2017, 04:20:00 PM
Somebody help me!
Have an Antminer D3 19.3 ghs x11.
Wants to leave it on arctic coin mining.
I don't understand the inputs from the pool.
What do I have to do with
URL: stratum+tcp: //x11. mine. zpool. ca: 3533#xnsub
User: (I need a BTC Wallet or an arctic coin wallet)
Password:
Ask for help.
I want the arctic coin directly mine it my arctic wallet what do I have to type there everything.
or do any of you know a better coin to mine?
Have an Antminer D3 19.3 ghs x11.
Wants to leave it on arctic coin mining.
I don't understand the inputs from the pool.
What do I have to do with
URL: stratum+tcp: //x11. mine. zpool. ca: 3533#xnsub
User: (I need a BTC Wallet or an arctic coin wallet)
Password:
Ask for help.
I want the arctic coin directly mine it my arctic wallet what do I have to type there everything.
or do any of you know a better coin to mine?
Please answer me too, same question about setup D3. And multipool can auto-convert coin to BTC exchange?
November 06, 2017, 12:18:29 PM
Hi All,
This is probably one of the more ridiculous questions that get asked on here...I apologize in advance.
I got the equihash zpool miner running nicely with my 4 x 1080 ti setup on ccminer but I see in the "miners" section on the zpool site that EWBF is the most commonly used miner for equihash and that is the one I've found I prefer but I can't seem to get it fired up with zpool.
I've used it on supernova pools successfully so I'm was just replacing things in hopes it would work...here's where I am. I must be close! I found that d=45 was a pretty good place for ccminer but I'm not sure how that translates...and obviously I replace with my BTC ADDY...
miner.exe --server equihash.mine.zpool.ca --user --pass d=45 c=BTC --port 2142 --cuda_devices 0 1 2 3
This is probably one of the more ridiculous questions that get asked on here...I apologize in advance.
I got the equihash zpool miner running nicely with my 4 x 1080 ti setup on ccminer but I see in the "miners" section on the zpool site that EWBF is the most commonly used miner for equihash and that is the one I've found I prefer but I can't seem to get it fired up with zpool.
I've used it on supernova pools successfully so I'm was just replacing things in hopes it would work...here's where I am. I must be close! I found that d=45 was a pretty good place for ccminer but I'm not sure how that translates...and obviously I replace
miner.exe --server equihash.mine.zpool.ca --user
November 06, 2017, 12:11:21 PM
Somebody help me!
Have an Antminer D3 19.3 ghs x11.
Wants to leave it on arctic coin mining.
I don't understand the inputs from the pool.
What do I have to do with
URL: stratum+tcp: //x11. mine. zpool. ca: 3533#xnsub
User: (I need a BTC Wallet or an arctic coin wallet)
Password:
Ask for help.
I want the arctic coin directly mine it my arctic wallet what do I have to type there everything.
or do any of you know a better coin to mine?
Have an Antminer D3 19.3 ghs x11.
Wants to leave it on arctic coin mining.
I don't understand the inputs from the pool.
What do I have to do with
URL: stratum+tcp: //x11. mine. zpool. ca: 3533#xnsub
User: (I need a BTC Wallet or an arctic coin wallet)
Password:
Ask for help.
I want the arctic coin directly mine it my arctic wallet what do I have to type there everything.
or do any of you know a better coin to mine?
November 06, 2017, 10:35:49 AM
Crackfoo,
Can you update the PHI (LUX) wallet your end ?
Version 3 is out and you have 2.2.4.0 running which will not sync anymore.
Can you update the PHI (LUX) wallet your end ?
Version 3 is out and you have 2.2.4.0 running which will not sync anymore.
updated.
Thanks
November 06, 2017, 10:19:44 AM
Crackfoo,
Can you update the PHI (LUX) wallet your end ?
Version 3 is out and you have 2.2.4.0 running which will not sync anymore.
Can you update the PHI (LUX) wallet your end ?
Version 3 is out and you have 2.2.4.0 running which will not sync anymore.
November 06, 2017, 08:26:51 AM
pool down?
-- back online --
little glitch...
-- back online --
little glitch...
my newer coin box crashed again. I've ordered a new one as I can't be bothered to log support issues. It's quicker to replace.
November 06, 2017, 07:48:35 AM
What’s going on here?
Verge (blake2s) 3.500722 XVG 0.224% 0.00385362 8w ago Immature (64827/140)
Verge (blake2s) 2.013900 XVG 0.129% 0.00221692 8w ago Immature (64828/140)
Verge (blake2s) 3.995147 XVG 0.256% 0.00439789 8w ago Immature (64922/140)
Verge (blake2s) 3.500722 XVG 0.224% 0.00385362 8w ago Immature (64827/140)
Verge (blake2s) 2.013900 XVG 0.129% 0.00221692 8w ago Immature (64828/140)
Verge (blake2s) 3.995147 XVG 0.256% 0.00439789 8w ago Immature (64922/140)
November 06, 2017, 05:49:12 AM
pool down?
-- back online --
little glitch...
-- back online --
little glitch...
November 06, 2017, 01:55:14 AM
What is blowing up on SHA256? Showing .27 current and .7 24 hour actual? Is this an error? Highest I see on whattomine and coinwarz is BitcoinCash and it is .19 right now.
Jump to: