Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 148. (Read 279744 times)

the pool can not be connected ...

Consider adding copper coin to the scrypt pool?

I see a current calculated profit of 0.00956 mbtc MH/day listed on cryptopia

https://bitcointalksearch.org/topic/ann-coppercoin-copper-hybrid-cryptocoin-pow-pos-2170714

Been solid here myself.   Are you sure its not connectivity issues with your given internet routing?

do some traces and look for packet loss/issues.  I can't play one of my favorite game servers anymore because of a bad node between California and their server.  50% packet loss or more through that one hop.  Slowly degraded over time too.

Nope. Clear day today.

is ddos today too? I think it's often connection lost for 2-3 min.

Not at the moment.

Sounds about right I have 2 Antminer L3+'s pointed at zpool atm making about 0.005 ish a day

hello, can anybody answer how much the daily profit (in BTC) for Antminer L3+ and Antminer D3 on Zpool is ? i am mining on Zpool with L3+ (scrypt) since yesterday, 15 hours exactly so my total earned amount of btc is : 0.00120046 BTC, is it ok ? they say zpool is more profitable for l3 than nicehash and other pools, so i wonder am i doing something wrong???

Any news regarding zpool will support BTG as soon as mainnet launches?

Yep... simplest way to see it, but just seeing the math problems always explained it easier in the past  To use less chars, just remove a zero from the beginning of each number: x11=0.001,x13=1,x14=1.... etc.     Some devices/apps don't like long passwords with a bunch of algos and parameters.



example pf a typical ccminer launch string:

-p i7-7100-GPU,c=BTC,algoName

i7-7100-GPU would be the rig name.  This way, when you see the connected miners on the right pane, its password string starts with its name.  Pick anything, separate it from the rest of the password with a comma as shown.

You should read this thread... you literally posted on the page after what explains the problem; and there is a quote of the pool admin's response at the very top of this page.


Please guys, try and read whats recently been talked about before repeating the same things already answered.
There was a DDOS or other host/datacenter issue.   Happened to everyone.


sometimes the message appears after you stop mining.... such as, the pool estimated the blocks to be enough to pay before the exchange magic happened; but not after it happened for the rest of the people who got credits on the same blocks you worked on.

The dots are a TX that has not happened yet; but it about to or in progress.
Those pictured blocks were immature.  until they get sold on market, then you get your final credit.  It's complicated, and that's why its called an estimate. you can only count it as a real number once it hits the "Balance" portion.  Anything else is a number that gets influenced by another [set of] variable(s).

You received what the pool was able to send you most likely.

I have received only 0.00773367 XCT.
WTF?
I stopped mining before red message appeared.

hello, can anybody answer how much the daily profit (in BTC) for Antminer L3+ and Antminer D3 on Zpool is ?

Help mining dead
https://i.imgur.com/Z6S8sF3.png

Hey quick question (they all are arent they?)
I was wondering if there was an ability on zpool to tag a miner.  I currently run about 6 different rigs and would love to be able to easily distinguish between all of them looking at the zpool dashboard.  If not, are there currently any plans to implement that kind of functionality?

Thanks in advance!

I had the same problem the past several hours (5am - 9am or so), where mining periodically went to 0, switched to my secondary pool, then came back to zpool.  No connection problems on my end, the miners never turned off, it just disconnected from Zpool without explanation.  (The gap from 6-10pm was scheduled maintenance)

So to make the things work properly i should set something like
x11=0.0001,x13=0.1,x14=0.1,x15=0.1,quark=0.0001,qubit=0.0001
due to the fact that x11, quark and qubit value are calculated in mBTC per GH, right?

when normalizing, its all about being a ratio to each other.

with .1 being your chosen normalization for all algos:


because X15 [.1*(0.00051)] is less than quark [.1*(0.176959)];   so it will pick the algo with the higher profitability/result of function based on your normalization.... which in your example numbers as I have shown; quark has the highest sum after doing the math.

i've got a question about Algo switching, hope you can help me understand better.
I have a Baikal giant+ 2Gh which can mine x11, x13, x14, x15, quark and qubit. Actually i'v set these parameters into password field:
"x11=0.1,x13=0.1,x14=0.1,x15=0.1,quark=0.1,qubit=0.1".

At the moment x15 has a value of 0.00051 mBTC/MH/day, right? Quark has a value of 0,176959 mBTC/GH/day.
My miner has 2GHash of power so i should earn more or less 1,02mBTC/day from x15 (0.00051mBTC*2000MH) and 0,353918mBTC/day from Quark (0,176959mBTC*2GH).

At this point my question is, why the auto switching algo choose to activate the quark straturm into my miner and not the x15 stratum? Shouldn't choose the most profitable alto to activate?

Am i doing something wrong?

they are back :-)

Should be ok now.