▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 187.

Windozxpert

full member

Activity: 196

Merit: 100

Quote from: crackfoo on August 25, 2017, 05:31:50 AM

Quote from: spider703 on August 25, 2017, 05:24:08 AM

A good time of day, and will other algorithms be added, for example m7m

I just dropped m7m cause of the instability of the magi Blockchain.

I'm open to coin suggestions though as long as it listed on an exchange the pool uses.

The problems with the blockchain have been resolved and the exchanges are picking it back up. The fix is supposed to be for good; then again, there's no way to tell if it'll split again. It's a determined community.
I'd rather have my m7m hashes going to zpool, but I've had to point them to an xmg pool instead.

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: spider703 on August 25, 2017, 05:24:08 AM

A good time of day, and will other algorithms be added, for example m7m

I just dropped m7m cause of the instability of the magi Blockchain.

I'm open to coin suggestions though as long as it listed on an exchange the pool uses.

spider703

full member

Activity: 1890

Merit: 148

A good time of day, and will other algorithms be added, for example m7m

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: balloontree on August 24, 2017, 09:04:35 PM

am i able to specify my L3+ to mine BitConnect Coin only and get payouts in Bitcoin?

No, it will mine what it thinks will earn the best for the hashrates the pool has. Lately, most has been on BCC anyway...

balloontree

newbie

Activity: 28

Merit: 0

am i able to specify my L3+ to mine BitConnect Coin only and get payouts in Bitcoin?

Max3k

newbie

Activity: 79

Merit: 0

Hi Crackfoo,
Please tell me, on what principle you add new coins for mining on pool, remarked that sometimes there are coins that are already possible to change on the exchange, but you have them yet not. Certainly there not always a large volume of trades, but us not this interested in, and only the final result =) For example SmartCash (keccak), Namo (nist5) etc.

MegaMiner48

newbie

Activity: 3

Merit: 0

Quote from: crackfoo on August 23, 2017, 03:05:46 PM

Upgrade completed. Downtime was ~15m at most. Any issues you see that are new let me know.

Cheers

No payments TOPAZ. Within 21 hours. What is the reason?

MikeBuzz

member

Activity: 68

Merit: 10

Any ideas why i get a high reject rate mining keccak

[2017-08-21 09:52:57] GPU #0: Zotac GTX 1070, 718.52 MH/s
[2017-08-21 09:52:57] accepted: 111/214 (51.87%), 717.52 MH/s booooo
[2017-08-21 09:52:57] reject reason: Low difficulty share
[2017-08-21 09:53:00] GPU #0: Zotac GTX 1070, 718.01 MH/s

Mining with exactly the same setting on MPH i get no such errors

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: balloontree on August 23, 2017, 10:11:52 PM

Quote from: crackfoo on August 23, 2017, 09:58:27 PM

I would first let the pool handle the diff, then set it to whatever diff most of your miners stick with. Then you can make it even all across the board.

It looks like most of the L3+'s have diff's between 75000 - 100000

Is it possible to observe which miner brings in how much in your pool? Or do i need to have different bitcoin address for it?

for that, they'd need their own BTC address...

balloontree

newbie

Activity: 28

Merit: 0

Quote from: crackfoo on August 23, 2017, 09:58:27 PM

I would first let the pool handle the diff, then set it to whatever diff most of your miners stick with. Then you can make it even all across the board.

It looks like most of the L3+'s have diff's between 75000 - 100000

Is it possible to observe which miner brings in how much in your pool? Or do i need to have different bitcoin address for it?

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: balloontree on August 23, 2017, 09:50:49 PM

Quote from: crackfoo on August 23, 2017, 12:17:45 PM

Quote from: balloontree on August 23, 2017, 10:44:58 AM

Hi guys,

I just got myself a L3+, is the following correct to setup it up to give payouts in Bitcoin?

Address: stratum+tcp://scrypt.mine.zpool.ca:3433
UserID:
Password: c=BTC,d=65536

Also, can I set a difficulty higher than 65536? Or maybe not set it at all?

If I want to receive different coins as payout, are the following correct?

Ether: c=ETH
Litecoin: c=LTC
Ripple: c=XRP
Dash: c=DASH
ZCash: c=ZCASH
XMR: c=XMR

Thanks!

yes you can set it higher if you want. I don't have one of those so you may have to try some different values to get one that the miner runs well on.

We don't have payouts in ETH XRP ZCASH or XMR. LTC we don't mine yet but I occasionally fill the wallet but its a manual process so payouts arn't regular. DASH is ok, just keep an eye on the pool stats. It list as red if there is not enough DASH to pay do to no blocks being found recently.

Is there a way to differentiate the different L3+ mining at your site? I have about 100+

Like which is mining at what capacity or which does better payouts, so we would know if the hash board is broken

I would first let the pool handle the diff, then set it to whatever diff most of your miners stick with. Then you can make it even all across the board.

It looks like most of the L3+'s have diff's between 75000 - 100000

balloontree

newbie

Activity: 28

Merit: 0

Quote from: crackfoo on August 23, 2017, 12:17:45 PM

Quote from: balloontree on August 23, 2017, 10:44:58 AM

Hi guys,

I just got myself a L3+, is the following correct to setup it up to give payouts in Bitcoin?

Address: stratum+tcp://scrypt.mine.zpool.ca:3433
UserID:
Password: c=BTC,d=65536

Also, can I set a difficulty higher than 65536? Or maybe not set it at all?

If I want to receive different coins as payout, are the following correct?

Ether: c=ETH
Litecoin: c=LTC
Ripple: c=XRP
Dash: c=DASH
ZCash: c=ZCASH
XMR: c=XMR

Thanks!

yes you can set it higher if you want. I don't have one of those so you may have to try some different values to get one that the miner runs well on.

We don't have payouts in ETH XRP ZCASH or XMR. LTC we don't mine yet but I occasionally fill the wallet but its a manual process so payouts arn't regular. DASH is ok, just keep an eye on the pool stats. It list as red if there is not enough DASH to pay do to no blocks being found recently.

Is there a way to differentiate the different L3+ mining at your site? I have about 100+

Like which is mining at what capacity or which does better payouts, so we would know if the hash board is broken

ItsCrafty

full member

Activity: 826

Merit: 135

Tontogether | Save Smart & Win Big

I am not getting this.

.\sgminer\sgminer.exe -k x11mod -o stratum+tcp://x11.mine.zpool.ca:3533 -u 1DRncKyjnLJE99zk3p3HB7YhkeDGBvZAky -p c=BTC -I 20 -g 2 -w 256 --auto-fan --thread-concurrency 8192 --lookup-gap 2 --vectors 1

Bfgminer --scrypt -o stratum+tcp://scrypt.mine.zpool.ca:3433 -u 1DRncKyjnLJE99zk3p3HB7YhkeDGBvZAky -p c=BTC -d 32 --auto-fan --intensity 20

I tried mining with both these combinations and with 1.4MH speed for x11 and 480Kh for scrypt, not a single hash is getting registered on Zpool.

What am I doing wrong?

Any help is appreciated.

Windozxpert

full member

Activity: 196

Merit: 100

Quote from: Windozxpert on August 23, 2017, 07:10:37 PM

Neoscrypt is down?

It's up now. Must have been a hiccup

Windozxpert

full member

Activity: 196

Merit: 100

Neoscrypt is down?

Pirozhkov

newbie

Activity: 20

Merit: 0

Quote from: crackfoo on August 23, 2017, 03:05:46 PM

Quote from: crackfoo on August 23, 2017, 12:45:08 PM

I'll be flipping the switch to the new server shortly. Looks like everything is primed and ready. I've not done this move in 2y so there may be something I forgot but AFAIK, it should be fairly smooth. The longest process will be performing the DB backup after the live server shuts down, moving and importing it and then waiting for the IP block to get moved to the new server which in the past takes 4-5 mins.

Upgrade completed. Downtime was ~15m at most. Any issues you see that are new let me know.

Cheers

Hello.
I started to mine on your pool. And he indicated the address of the SIGT.
My .bat file:

Quote

ccminer-x64 -a skunk -o stratum+tcp://mine.zpool.ca:8433 -u BMnB8DM5LXVZDTgr5E82toYZkiuLYCVPWW -p c=sigt --cpu-priority=5 -d 0 -i 25
pause

You are told:

Quote

You can also use any valid wallet address from any of the coins we mine. This feature has had minimal testing so use at your own risk

So I used the SIGT address.
But I saw this:
https://i.imgur.com/T9DJ3gy.png
So how do I get paid and what address to use?
Thank you. Sorry, for bad english.

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: crackfoo on August 23, 2017, 12:45:08 PM

I'll be flipping the switch to the new server shortly. Looks like everything is primed and ready. I've not done this move in 2y so there may be something I forgot but AFAIK, it should be fairly smooth. The longest process will be performing the DB backup after the live server shuts down, moving and importing it and then waiting for the IP block to get moved to the new server which in the past takes 4-5 mins.

Upgrade completed. Downtime was ~15m at most. Any issues you see that are new let me know.

Cheers

crackfoo

legendary

Activity: 3570

Merit: 1126

Quote from: jmvarner83 on August 23, 2017, 01:32:10 PM

Quote from: crackfoo on August 23, 2017, 12:45:08 PM

I'll be flipping the switch to the new server shortly. Looks like everything is primed and ready. I've not done this move in 2y so there may be something I forgot but AFAIK, it should be fairly smooth. The longest process will be performing the DB backup after the live server shuts down, moving and importing it and then waiting for the IP block to get moved to the new server which in the past takes 4-5 mins.

Do you care to check into lost shares? Two of us hoped on your server and never got paid on BTX shares. 1P79qNbj6R9K7RfyNbgWsSYTiptUGgCMhK is wallet ID

Thanks!

BTX markets were down for ~24h there a couple days go so it look like they were 0 value.

jmvarner83

member

Activity: 194

Merit: 12

Quote from: crackfoo on August 23, 2017, 12:45:08 PM

I'll be flipping the switch to the new server shortly. Looks like everything is primed and ready. I've not done this move in 2y so there may be something I forgot but AFAIK, it should be fairly smooth. The longest process will be performing the DB backup after the live server shuts down, moving and importing it and then waiting for the IP block to get moved to the new server which in the past takes 4-5 mins.

Do you care to check into lost shares? Two of us hoped on your server and never got paid on BTX shares. 1P79qNbj6R9K7RfyNbgWsSYTiptUGgCMhK is wallet ID

Thanks!

crackfoo

legendary

Activity: 3570

Merit: 1126

I'll be flipping the switch to the new server shortly. Looks like everything is primed and ready. I've not done this move in 2y so there may be something I forgot but AFAIK, it should be fairly smooth. The longest process will be performing the DB backup after the live server shuts down, moving and importing it and then waiting for the IP block to get moved to the new server which in the past takes 4-5 mins.

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 187. (Read 279744 times)