Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 183. (Read 279744 times)
August 31, 2017, 07:49:38 AM
servers not working or I have problems?
August 31, 2017, 07:07:10 AM
https://btc.com/stats/unconfirmed-tx
one input and one output is ~300 bytes or 250, no wallet to check atm. make sure you spend all 6 inputs, no change to another address!
combining 6 inputs to one output is 1800 bytes,
paying 20 satoshi per byte will get your transaction within 12 hours, that make 0,00036, out of 0,015 that's 2,4%
paying 40 satoshi per byte will drop the time to 3 hours and feee would be 0,00072 or 4,8%
you can drop those to 10 satoshi, they will confirm for a day, at most 2 days for 1,2%!
p.s. online wallets charge fee from 0,0001 to 0,001, if you can't do the math, they can and keep the change as a profit!
imagine 5000 miners store their 0,015 daily earn a total ot 75btc/+$300K on pool op's hot wallet!
one input and one output is ~300 bytes or 250, no wallet to check atm. make sure you spend all 6 inputs, no change to another address!
combining 6 inputs to one output is 1800 bytes,
paying 20 satoshi per byte will get your transaction within 12 hours, that make 0,00036, out of 0,015 that's 2,4%
paying 40 satoshi per byte will drop the time to 3 hours and feee would be 0,00072 or 4,8%
you can drop those to 10 satoshi, they will confirm for a day, at most 2 days for 1,2%!
p.s. online wallets charge fee from 0,0001 to 0,001, if you can't do the math, they can and keep the change as a profit!
imagine 5000 miners store their 0,015 daily earn a total ot 75btc/+$300K on pool op's hot wallet!
August 31, 2017, 07:02:59 AM
Great! thanks a lot. I'm testing loading APi data, but I have sometime problem with second api.
OK download balance info:
http://www.zpool.ca/api/wallet?address=1CrovZGgLioTsGXmT8ZfKoNmJ2Nd3EGiRH
Sometime I can download miners info, but sometime is there blank screen:
http://www.zpool.ca/api/walletEx?address=1CrovZGgLioTsGXmT8ZfKoNmJ2Nd3EGiRH
I'd like add also miners hashrate, not only balance info to app. thanks a lot for help.
OK download balance info:
http://www.zpool.ca/api/wallet?address=1CrovZGgLioTsGXmT8ZfKoNmJ2Nd3EGiRH
Sometime I can download miners info, but sometime is there blank screen:
http://www.zpool.ca/api/walletEx?address=1CrovZGgLioTsGXmT8ZfKoNmJ2Nd3EGiRH
I'd like add also miners hashrate, not only balance info to app. thanks a lot for help.
Same problem, makes it really hard to use the API
August 31, 2017, 06:13:37 AM
already answered - this is a pool, not an e-wallet, however you can change your address to an exchange with low withdrawal fee and sum there small payments and then send to your main wallet.
4 hours to pay, each 0.015btc. Pay 6 times a day. Each spend 0.006~0.008btc for mining fee.
Receive in total 0.015*6=0.09btc and use 0.006~0.008btc*6=0.036~0.048btc mining fee to transaction.
So the fee≈30%-40%?
Someone to explain it?
August 31, 2017, 04:51:46 AM
already answered - this is a pool, not an e-wallet, however you can change your address to an exchange with low withdrawal fee and sum there small payments and then send to your main wallet.
August 31, 2017, 12:56:54 AM
How can i request manual or customize the number of payments as above 1btc etc.
A lot of smart payments spend huge mining fee.
A lot of smart payments spend huge mining fee.
August 30, 2017, 09:40:50 AM
please tell me, I have a scrypt asic, can I mine some other algorithms? currency seems to have the same....
August 30, 2017, 08:24:54 AM
Good day to all.
Tell me how to specify?
So
stratum+tcp://scrypt.mine.zpool.ca:3433
or
so
stratum+tcp://mine.zpool.ca:3433
?
do I need to add /#xnsub?
what influenced these changes?
Tell me how to specify?
So
stratum+tcp://scrypt.mine.zpool.ca:3433
or
so
stratum+tcp://mine.zpool.ca:3433
?
do I need to add /#xnsub?
what influenced these changes?
stratum+tcp://scrypt.mine.zpool.ca:3433
what does it affect?
if I decide to move the stratum server to a new machine the IP will change... and your miners will stop. It just adds more flexibility for me and moving resources around. Please always use those hostnames then you won't even notice any changes.
Cheers
August 30, 2017, 08:16:33 AM
Good day to all.
Tell me how to specify?
So
stratum+tcp://scrypt.mine.zpool.ca:3433
or
so
stratum+tcp://mine.zpool.ca:3433
?
do I need to add /#xnsub?
what influenced these changes?
Tell me how to specify?
So
stratum+tcp://scrypt.mine.zpool.ca:3433
or
so
stratum+tcp://mine.zpool.ca:3433
?
do I need to add /#xnsub?
what influenced these changes?
stratum+tcp://scrypt.mine.zpool.ca:3433
what does it affect?
August 30, 2017, 08:10:05 AM
Is there something wrong with Zpool hashrate reporting on Skein?
I started a miner (Using Sniffdog-CCminerAlexis, 8x 1080ti reporting 8.25 Gh/s on miner) but on the pool stats it goes up to 2.4 Gh/s then drops down to around 800 Mh/s ?
I let it run for 30 minutes but it doesnt report exactly as miner.. Is there a problem with it or is the USD/Day reported on Sniffdog correct for Skein?
Please advise.
Link for miner stats http://zpool.ca/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Running it on Hashrefinery fine here to compare http://pool.hashrefinery.com/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Was running around 14 hours on Hash (Only issue I have with them is the high reject rate and I am willing to move to zpool if that issue is corrected, unless I am reading something wrong
)
I started a miner (Using Sniffdog-CCminerAlexis, 8x 1080ti reporting 8.25 Gh/s on miner) but on the pool stats it goes up to 2.4 Gh/s then drops down to around 800 Mh/s ?
I let it run for 30 minutes but it doesnt report exactly as miner.. Is there a problem with it or is the USD/Day reported on Sniffdog correct for Skein?
Please advise.
Link for miner stats http://zpool.ca/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Running it on Hashrefinery fine here to compare http://pool.hashrefinery.com/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Was running around 14 hours on Hash (Only issue I have with them is the high reject rate and I am willing to move to zpool if that issue is corrected, unless I am reading something wrong
)I just restarted skien, can you try again?
Thanks
http://zpool.ca/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Looks about right now
August 30, 2017, 07:40:50 AM
Is there something wrong with Zpool hashrate reporting on Skein?
I started a miner (Using Sniffdog-CCminerAlexis, 8x 1080ti reporting 8.25 Gh/s on miner) but on the pool stats it goes up to 2.4 Gh/s then drops down to around 800 Mh/s ?
I let it run for 30 minutes but it doesnt report exactly as miner.. Is there a problem with it or is the USD/Day reported on Sniffdog correct for Skein?
Please advise.
Link for miner stats http://zpool.ca/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Running it on Hashrefinery fine here to compare http://pool.hashrefinery.com/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Was running around 14 hours on Hash (Only issue I have with them is the high reject rate and I am willing to move to zpool if that issue is corrected, unless I am reading something wrong )
I started a miner (Using Sniffdog-CCminerAlexis, 8x 1080ti reporting 8.25 Gh/s on miner) but on the pool stats it goes up to 2.4 Gh/s then drops down to around 800 Mh/s ?
I let it run for 30 minutes but it doesnt report exactly as miner.. Is there a problem with it or is the USD/Day reported on Sniffdog correct for Skein?
Please advise.
Link for miner stats http://zpool.ca/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Running it on Hashrefinery fine here to compare http://pool.hashrefinery.com/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Was running around 14 hours on Hash (Only issue I have with them is the high reject rate and I am willing to move to zpool if that issue is corrected, unless I am reading something wrong
)I just restarted skien, can you try again?
Thanks
August 30, 2017, 07:40:30 AM
Good day to all.
Tell me how to specify?
So
stratum+tcp://scrypt.mine.zpool.ca:3433
or
so
stratum+tcp://mine.zpool.ca:3433
?
do I need to add /#xnsub?
what influenced these changes?
Tell me how to specify?
So
stratum+tcp://scrypt.mine.zpool.ca:3433
or
so
stratum+tcp://mine.zpool.ca:3433
?
do I need to add /#xnsub?
what influenced these changes?
stratum+tcp://scrypt.mine.zpool.ca:3433
you can add #xnsub which does improve efficiency afaik.
thanks
August 30, 2017, 07:24:44 AM
Is there something wrong with Zpool hashrate reporting on Skein?
I started a miner (Using Sniffdog-CCminerAlexis, 8x 1080ti reporting 8.25 Gh/s on miner) but on the pool stats it goes up to 2.4 Gh/s then drops down to around 800 Mh/s ?
I let it run for 30 minutes but it doesnt report exactly as miner.. Is there a problem with it or is the USD/Day reported on Sniffdog correct for Skein?
Please advise.
Link for miner stats http://zpool.ca/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Running it on Hashrefinery fine here to compare http://pool.hashrefinery.com/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Was running around 14 hours on Hash (Only issue I have with them is the high reject rate and I am willing to move to zpool if that issue is corrected, unless I am reading something wrong )
I started a miner (Using Sniffdog-CCminerAlexis, 8x 1080ti reporting 8.25 Gh/s on miner) but on the pool stats it goes up to 2.4 Gh/s then drops down to around 800 Mh/s ?
I let it run for 30 minutes but it doesnt report exactly as miner.. Is there a problem with it or is the USD/Day reported on Sniffdog correct for Skein?
Please advise.
Link for miner stats http://zpool.ca/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Running it on Hashrefinery fine here to compare http://pool.hashrefinery.com/?address=1LoZQEpppUi66JMyhi92xzV3Kvk9C9GizL
Was running around 14 hours on Hash (Only issue I have with them is the high reject rate and I am willing to move to zpool if that issue is corrected, unless I am reading something wrong
) August 30, 2017, 06:27:41 AM
Good day to all.
Tell me how to specify?
So
stratum+tcp://scrypt.mine.zpool.ca:3433
or
so
stratum+tcp://mine.zpool.ca:3433
?
do I need to add /#xnsub?
what influenced these changes?
Tell me how to specify?
So
stratum+tcp://scrypt.mine.zpool.ca:3433
or
so
stratum+tcp://mine.zpool.ca:3433
?
do I need to add /#xnsub?
what influenced these changes?
August 28, 2017, 11:19:15 PM
Ouch. Scrypt profitability has taken a beating.
Oh me knackers!
Oh me knackers!
I think only because of ccex listed LINDA earlier and it pumped up to 1000 sats when it should have be 5
Good to know. I didn't expect a real answer. Thanks for that.
Excuse me now while I ice my brused balls
August 28, 2017, 10:01:59 PM
Ouch. Scrypt profitability has taken a beating.
Oh me knackers!
Oh me knackers!
I think only because of ccex listed LINDA earlier and it pumped up to 1000 sats when it should have be 5
August 28, 2017, 09:56:37 PM
Ouch. Scrypt profitability has taken a beating.
Oh me knackers!
Oh me knackers!
August 28, 2017, 05:57:03 PM
@crackfoo
Got some good news for you: https://bitcointalksearch.org/topic/nicehashcom-vs-zpoolca-vs-miningpoolhubcom-and-the-winner-is-2067256
Got some good news for you: https://bitcointalksearch.org/topic/nicehashcom-vs-zpoolca-vs-miningpoolhubcom-and-the-winner-is-2067256
outstanding, thanks a lot. There were even a few hiccups this week with ddos attackers (though that is a never ending battle) and some botnets wreaking havoc.
I'll post this thread link in my OP to help defer the naysayers.
Cheers
August 28, 2017, 03:06:04 PM
@crackfoo
Got some good news for you: https://bitcointalksearch.org/topic/nicehashcom-vs-zpoolca-vs-miningpoolhubcom-and-the-winner-is-2067256
Got some good news for you: https://bitcointalksearch.org/topic/nicehashcom-vs-zpoolca-vs-miningpoolhubcom-and-the-winner-is-2067256
August 28, 2017, 02:32:30 PM
Pool not working???
Works, but very very slowly. Early (1-2 days ago) speed Scrypt (mBTC/MH/day) was more than 3 times higher....
Can be removed /#xnsub or not?
Jump to: