Author

Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 217. (Read 279614 times)

full member
Activity: 322
Merit: 233
Is maintenance or connection issues happening? All my mining rigs have disconnected from both mining locations to all algo ports.. i am unable to connect to any algo port for more than a few seconds before being disconnected, ping to ports is over 5000ms....

connection at both sites exceed 100mb, so not isp...

Not right now no but the chaps blasting yescrypt with a bot net I think are the culprits.

I may just drop yescrypt altogether, it's always been a resource hog at the best of times.

i really hope something can be done.. because the lack of ability to connect to your pool is forcing my multi-algo miner to connect to minerpoolhub more and more the last few hours... even with your pool listed at a higher priority... it just cycles through 3 attempts to connect to 11 different algo's, then after 33 attempts it defaults to equihash on minerpoolhub for 60minutes before it attempts again...
member
Activity: 66
Merit: 10
Having problem with connecting to blake2s stratum. 'Stratum connection failed: connection refused.'
sr. member
Activity: 434
Merit: 251
Pool host: decred.mine.zpool.ca
Pool port: 5744
Pool user:
Pool pass: x
Algorithm: Decred

Resolving pool host decred.mine.zpool.ca... OK
Establishing connection with proxy... OK
Establishing connection with pool 149.56.122.79:5744... OK
Sending mining.subscribe... OK
Sending mining.authorize... OK
Received mining.notify subscription... OK
Received authorization result... OK
Received mining.set_difficulty... OK: difficulty=1
Error: Read timed out
Your pool is shown as incompatible therefore we encourage you to contact pool operator to make sure that the pool is using minimal/starting pool share difficulty which is compatible with our service (and thus compatible with today's miners), please send them link to our FAQ on this topic: https://www.nicehash.com/index.jsp?p=faq#faqb3. Thank you!
legendary
Activity: 3486
Merit: 1126
Is maintenance or connection issues happening? All my mining rigs have disconnected from both mining locations to all algo ports.. i am unable to connect to any algo port for more than a few seconds before being disconnected, ping to ports is over 5000ms....

connection at both sites exceed 100mb, so not isp...

Not right now no but the chaps blasting yescrypt with a bot net I think are the culprits.

I may just drop yescrypt altogether, it's always been a resource hog at the best of times.
full member
Activity: 322
Merit: 233
Is maintenance or connection issues happening? All my mining rigs have disconnected from both mining locations to all algo ports.. i am unable to connect to any algo port for more than a few seconds before being disconnected, ping to ports is over 5000ms....

connection at both sites exceed 100mb, so not isp...
sr. member
Activity: 434
Merit: 251
Made some changes to the payouts:

Payouts are made automatically every 4 hours for all balances above 0.02 and balances more than 0.002 are paid on Sunday.

Cheers

Why the change?
newbie
Activity: 30
Merit: 0
crackfoo, plz, be a good pool master, check my 2 days old support ticket, eh?
newbie
Activity: 10
Merit: 0
Made some changes to the payouts:

Payouts are made automatically every 4 hours for all balances above 0.02 and balances more than 0.002 are paid on Sunday.

Cheers

Any chans to get Dash payouts soon?

We just found a DASH block so after that confirms, it should be paid... might make it to payouts later tonight.

Great News. Thnaks
legendary
Activity: 3486
Merit: 1126
Made some changes to the payouts:

Payouts are made automatically every 4 hours for all balances above 0.02 and balances more than 0.002 are paid on Sunday.

Cheers

Any chans to get Dash payouts soon?

We just found a DASH block so after that confirms, it should be paid... might make it to payouts later tonight.
full member
Activity: 322
Merit: 233
crackfoo,

Whatever you did for equihash, thank you... i switched my other rigs over to allow equihash.. ive only had 2 disconnects in 11hrs... which both reconnected within 3 tries

good to hear. ^_^

Ya whatever you did increased my speed to your server, i was running in the 40ms ping rate, now im around 15ms to the server...but i have noticed that the last 2 days ping rate on skein port is randomly spiking to the 200-300ms range
full member
Activity: 322
Merit: 233
crackfoo,

Whatever you did for equihash, thank you... i switched my other rigs over to allow equihash.. ive only had 2 disconnects in 11hrs... which both reconnected within 3 tries
newbie
Activity: 10
Merit: 0
Made some changes to the payouts:

Payouts are made automatically every 4 hours for all balances above 0.02 and balances more than 0.002 are paid on Sunday.

Cheers

Any chans to get Dash payouts soon?
legendary
Activity: 3486
Merit: 1126
Made some changes to the payouts:

Payouts are made automatically every 4 hours for all balances above 0.02 and balances more than 0.002 are paid on Sunday.

Cheers
full member
Activity: 144
Merit: 100
Here is something I have been wondering about.

I rent from NH, lets say x11, and I have the possibility of creating 1 order/miner with 500Ghs.
Is it better to have 1 big order or multiple small orders?

For some of the coins that are on x11 that would be alot of hashing power.

My thought is that a few smaller orders is better because it allows the pool to switch around.
1 big order would be focused on the coins that can handle it, which may not be the most profitable.

I have no facts to support my idea so I thought I would ask you.
newbie
Activity: 30
Merit: 0
It was kinda telling you I'd opened a ticket two days ago  Smiley

As for NH EH I spent 'bout 1/2 hour waiting and cancelled order. But now seems smooth.
legendary
Activity: 3486
Merit: 1126
crackfoo, should I open support ticket here or smbd give a quick look?  Smiley

I don't see a way in NH to enable this, only if you are sending hash TO NH... Maybe a support ticket with them to see if they have a way to use #xnsub for sending hash to pools...
newbie
Activity: 30
Merit: 0
crackfoo, should I open support ticket here or smbd give a quick look?  Smiley
newbie
Activity: 17
Merit: 0
Decred is where the profit is right now!

How are you guys calculating potential profit?

This is my current understanding; please correct me if I'm wrong:

Using decred and 4x1060 3GB cards as an example:

- 0.95 mBTC/GH last 24h "actual" return (read below for why this is in quotes)
- GH/s = roughly 1.4 * 4 (from benchmarks page) = 5.6GH/s
- Therefore if all things remain the same, mBTC per day should be 5.6 * 0.95 = 5.32
- Translates at current prices into $13.83 per day

However, you have to take into account the price at which the coins will be sold.  This depends on confirmation time + batch creation time (sometime coins are sold in batches to reduce fees or because of exchange restrictions) + exchange rate and fees.  In other words, the coins you mine now may only be sold a few days later (NETKO is a good example) at prices that are different to what the mBTC per day value shows.  This means that the "Actual" 24 hour rate is only indicative of what the coins could return if everything remained the same.  But as we know it rarely does.  More often than not the value that is reported is not a useful guide over short periods of time.

Is my arithmetic and/or reasoning flawed?  Am I missing anything?
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
can someone please post a bat file for equihash ? do I use ccminer or ewbf miner? please post batfile example because my ccminer has no equihash algo
Code:
equihash.exe --server equihash.mine.zpool.ca --user %ADDY% --pass c=BTC,equihash,stats --port 2142 --eexit 3
using ewbf.
Jump to: