fwiw; yesterday on a larger machine only got one payout, when its normally 2-3 a day.
Profitability was down for ~22 hours or so give or take.
Topic: ▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!KAWPOW!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂ - page 221. (Read 279614 times)
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
hmq1725 Is reporting low hash rates again. It's actually affecting the pay %.
It was fine after the first time we reported it, but it's happening again now.
It was fine after the first time we reported it, but it's happening again now.
Its off by 1000
I'm mining at 15.5 Mh/s but it's reporting 68 kh/s.
It's not just a reporting/cosmetic issue because the payouts reflect the performance. I was getting larger payments for each Espers block found but now the payouts are as small as the reported hash rate (same ratio).
I'm seeing the same thing. I think I'm disabling hmq1725 for now. Not sure why the pool hashrate is so low compared to what local miners are saying.
Technically your paid by the share and the hashrate is simply something that's calculated from that. Once I'm back I'll check and see with the yiimp dev to see about changing the hashrate calculation. It's not going to change anything in regards to your connection, just a GUI fix.
But the earnings of everything reporting on the site seems to indicate that it's not paying out what the site is reporting it should. All graphs look flat, the hashrates of the workers are showing significantly lower than what is being reported locally. Are you saying that we should see similar earnings to what we've seen in the past few days if we keep mining hmq1725? I trust you, but it's very hard to judge if our miners are actually effective when the tools to measure the performance on the pool show otherwise.
I do see that I was getting shares of a few Esper mined, but again it seems near impossible to know what returns that we can expect from it when the graphs are all showing either flat or decreasing earnings.
hmq1725 Is reporting low hash rates again. It's actually affecting the pay %.
It was fine after the first time we reported it, but it's happening again now.
It was fine after the first time we reported it, but it's happening again now.
Its off by 1000
I'm mining at 15.5 Mh/s but it's reporting 68 kh/s.
It's not just a reporting/cosmetic issue because the payouts reflect the performance. I was getting larger payments for each Espers block found but now the payouts are as small as the reported hash rate (same ratio).
I'm seeing the same thing. I think I'm disabling hmq1725 for now. Not sure why the pool hashrate is so low compared to what local miners are saying.
Technically your paid by the share and the hashrate is simply something that's calculated from that. Once I'm back I'll check and see with the yiimp dev to see about changing the hashrate calculation. It's not going to change anything in regards to your connection, just a GUI fix.
hmq1725 Is reporting low hash rates again. It's actually affecting the pay %.
It was fine after the first time we reported it, but it's happening again now.
It was fine after the first time we reported it, but it's happening again now.
Its off by 1000
I'm mining at 15.5 Mh/s but it's reporting 68 kh/s.
It's not just a reporting/cosmetic issue because the payouts reflect the performance. I was getting larger payments for each Espers block found but now the payouts are as small as the reported hash rate (same ratio).
I'm seeing the same thing. I think I'm disabling hmq1725 for now. Not sure why the pool hashrate is so low compared to what local miners are saying.
Crackfoo,
Can you talk / explain Hashtap a little bit. I really like the idea but but i'm not sure who would use it at it's current price structure. It appears to be 2x the current algo 24 hour estimate.
for people to actually use it would it have to be less than current estimate?
like somewhere between 90%-95% of 24 hr est.
Can you talk / explain Hashtap a little bit. I really like the idea but but i'm not sure who would use it at it's current price structure. It appears to be 2x the current algo 24 hour estimate.
for people to actually use it would it have to be less than current estimate?
like somewhere between 90%-95% of 24 hr est.
Remember it's the miners multipool. No miner will want to give their hash away at a price less than what they can be by mining coins so the price will most always be slightly higher than mining would make. Keep in mind there is no order fees or work restart penelties or order cancel fees like you get by using Nicehash.
Crackfoo,
Can you talk / explain Hashtap a little bit. I really like the idea but but i'm not sure who would use it at it's current price structure. It appears to be 2x the current algo 24 hour estimate.
for people to actually use it would it have to be less than current estimate?
like somewhere between 90%-95% of 24 hr est.
Can you talk / explain Hashtap a little bit. I really like the idea but but i'm not sure who would use it at it's current price structure. It appears to be 2x the current algo 24 hour estimate.
for people to actually use it would it have to be less than current estimate?
like somewhere between 90%-95% of 24 hr est.
legendary
Activity: 1848
Merit: 1166
My AR-15 ID's itself as a toaster. Want breakfast?
MAn, I picked the wrong time to take a few days away from forums.
Most info people have been requesting is in my batch link in my signature; how to normalize, etc... but looks like its all sorted now.
Still working on updates for my batch.
Ill probably integrate the core/clock modifications to the batch I see in the posts above me.
Will add some more convolution, but that's all right.
Right now I'm trying to get my "All batches in one" to work properly. Lots to figure out still.
Most info people have been requesting is in my batch link in my signature; how to normalize, etc... but looks like its all sorted now.
Still working on updates for my batch.
Ill probably integrate the core/clock modifications to the batch I see in the posts above me.
Will add some more convolution, but that's all right.
Right now I'm trying to get my "All batches in one" to work properly. Lots to figure out still.
hmq1725 Is reporting low hash rates again. It's actually affecting the pay %.
It was fine after the first time we reported it, but it's happening again now.
It was fine after the first time we reported it, but it's happening again now.
Its off by 1000
I'm mining at 15.5 Mh/s but it's reporting 68 kh/s.
It's not just a reporting/cosmetic issue because the payouts reflect the performance. I was getting larger payments for each Espers block found but now the payouts are as small as the reported hash rate (same ratio).
Just another 100 GH or so and we get a fee drop!
hmq1725 Is reporting low hash rates again. It's actually affecting the pay %.
It was fine after the first time we reported it, but it's happening again now.
It was fine after the first time we reported it, but it's happening again now.
Its off by 1000
hmq1725 Is reporting low hash rates again. It's actually affecting the pay %.
It was fine after the first time we reported it, but it's happening again now.
It was fine after the first time we reported it, but it's happening again now.
Little concerned... the api earnings are not matching up to my earnings today... looks like today will be one of the lowest payed days in a while....
hmq1725 is broke need to disable it for now..
Im currently only mining equihash, skein, and blake2s as my rotation
equihash i find doesnt perform that well so i have it disabled myself..
skein i also have disabled
blake2s has tanked in price last 48hours as it got added to "nicehash"
i run -Algorithm hmq1725,groestl,timetravel,sib,bitcore,x17,blakecoin,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s
I need to sit down and take the time to rewrite my batch file... i recently learned how to tune the cards via the batch file so it switches core and mem settings when it starts a new algo... atleast on the pascal cards....not figured it out on any other cards yet
Merry Christmas
Code:
@echo off
SETLOCAL EnableExtensions
SET ADDY=BTC ADDRESS HERE
SET PASS=RIG02,c=BTC,skein=4200,blake2s=36,stats
SET CCMINER=C:\CRYPTO\MINERS\CCMINER\
:start
ECHO Setting Optimized System Values
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ECHO multi-algo Switcher....
ECHO Setting optimized Clocks.....
@echo off
REM --------SKIEN---------
SET GPU0=-setBaseClockOffset:0,0,250 -setMemoryClockOffset:0,0,-1000 -setPowerTarget:0,80 -setTempTarget:0,0,83 -forcepstate:0,0
SET GPU1=-setBaseClockOffset:1,0,250 -setMemoryClockOffset:1,0,-1000 -setPowerTarget:1,80 -setTempTarget:1,0,83 -forcepstate:1,0
SET GPU2=-setBaseClockOffset:2,0,250 -setMemoryClockOffset:2,0,-1000 -setPowerTarget:2,80 -setTempTarget:2,0,83 -forcepstate:2,0
SET GPU3=-setBaseClockOffset:3,0,250 -setMemoryClockOffset:3,0,-1000 -setPowerTarget:3,80 -setTempTarget:3,0,83 -forcepstate:3,0
SET GPU4=-setBaseClockOffset:4,0,250 -setMemoryClockOffset:4,0,-1000 -setPowerTarget:4,80 -setTempTarget:4,0,83 -forcepstate:4,0
SET GPU5=-setBaseClockOffset:5,0,250 -setMemoryClockOffset:5,0,-1000 -setPowerTarget:5,80 -setTempTarget:5,0,83 -forcepstate:5,0
SET GPU6=-setBaseClockOffset:6,0,250 -setMemoryClockOffset:6,0,-1000 -setPowerTarget:6,80 -setTempTarget:6,0,83 -forcepstate:6,0
C:\CRYPTO\SOFTWARE\nvidiaInspector\nvidiaInspector.exe %GPU0% %GPU1% %GPU2% %GPU3% %GPU4% %GPU5% %GPU6%
CD %CCMINER%
ECHO Starting Miner.....
ccminer_sp.exe -r 0 -t 7 -a skein -i 25.25 -o stratum+tcp://skein.mine.zpool.ca:4933/#xnsub -b 0.0.0.0:4068 -u %ADDY% -p %PASS%
ECHO Setting optimized Clocks.....
@echo off
REM --------BLAKE2S--------
SET GPU0=-setBaseClockOffset:0,0,275 -setMemoryClockOffset:0,0,-1000 -setPowerTarget:0,80 -setTempTarget:0,0,83 -forcepstate:0,0
SET GPU1=-setBaseClockOffset:1,0,275 -setMemoryClockOffset:1,0,-1000 -setPowerTarget:1,80 -setTempTarget:1,0,83 -forcepstate:1,0
SET GPU2=-setBaseClockOffset:2,0,275 -setMemoryClockOffset:2,0,-1000 -setPowerTarget:2,80 -setTempTarget:2,0,83 -forcepstate:2,0
SET GPU3=-setBaseClockOffset:3,0,275 -setMemoryClockOffset:3,0,-1000 -setPowerTarget:3,80 -setTempTarget:3,0,83 -forcepstate:3,0
SET GPU4=-setBaseClockOffset:4,0,275 -setMemoryClockOffset:4,0,-1000 -setPowerTarget:4,80 -setTempTarget:4,0,83 -forcepstate:4,0
SET GPU5=-setBaseClockOffset:5,0,275 -setMemoryClockOffset:5,0,-1000 -setPowerTarget:5,80 -setTempTarget:5,0,83 -forcepstate:5,0
SET GPU6=-setBaseClockOffset:6,0,275 -setMemoryClockOffset:6,0,-1000 -setPowerTarget:6,80 -setTempTarget:6,0,83 -forcepstate:6,0
C:\CRYPTO\SOFTWARE\nvidiaInspector\nvidiaInspector.exe %GPU0% %GPU1% %GPU2% %GPU3% %GPU4% %GPU5% %GPU6%
CD %CCMINER%
ECHO Starting Miner.....
ccminer_tpruvot.exe -r 0 -t 7 -a blake2s -i 30 -o stratum+tcp://blake2s.mine.zpool.ca:5766/#xnsub -b 0.0.0.0:4068 -u %ADDY% -p %PASS%
goto start
Wow, you did exactly what I have been trying to self teach myself for days lol.....I did it slightly different than the way you did it, but I like how clean yours is so ima transfer my stuff over to your layout.....I managed to get it dialed in on 5 different algos lastnight.....I'm having issues with it exiting z miner for equihash...it sometimes fails to close it before starting the next algo on ccminer ... have this issue?
Little concerned... the api earnings are not matching up to my earnings today... looks like today will be one of the lowest payed days in a while....
hmq1725 is broke need to disable it for now..
Im currently only mining equihash, skein, and blake2s as my rotation
equihash i find doesnt perform that well so i have it disabled myself..
skein i also have disabled
blake2s has tanked in price last 48hours as it got added to "nicehash"
i run -Algorithm hmq1725,groestl,timetravel,sib,bitcore,x17,blakecoin,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s
I need to sit down and take the time to rewrite my batch file... i recently learned how to tune the cards via the batch file so it switches core and mem settings when it starts a new algo... atleast on the pascal cards....not figured it out on any other cards yet
Merry Christmas
Code:
@echo off
SETLOCAL EnableExtensions
SET ADDY=BTC ADDRESS HERE
SET PASS=RIG02,c=BTC,skein=4200,blake2s=36,stats
SET CCMINER=C:\CRYPTO\MINERS\CCMINER\
:start
ECHO Setting Optimized System Values
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ECHO multi-algo Switcher....
ECHO Setting optimized Clocks.....
@echo off
REM --------SKIEN---------
SET GPU0=-setBaseClockOffset:0,0,250 -setMemoryClockOffset:0,0,-1000 -setPowerTarget:0,80 -setTempTarget:0,0,83 -forcepstate:0,0
SET GPU1=-setBaseClockOffset:1,0,250 -setMemoryClockOffset:1,0,-1000 -setPowerTarget:1,80 -setTempTarget:1,0,83 -forcepstate:1,0
SET GPU2=-setBaseClockOffset:2,0,250 -setMemoryClockOffset:2,0,-1000 -setPowerTarget:2,80 -setTempTarget:2,0,83 -forcepstate:2,0
SET GPU3=-setBaseClockOffset:3,0,250 -setMemoryClockOffset:3,0,-1000 -setPowerTarget:3,80 -setTempTarget:3,0,83 -forcepstate:3,0
SET GPU4=-setBaseClockOffset:4,0,250 -setMemoryClockOffset:4,0,-1000 -setPowerTarget:4,80 -setTempTarget:4,0,83 -forcepstate:4,0
SET GPU5=-setBaseClockOffset:5,0,250 -setMemoryClockOffset:5,0,-1000 -setPowerTarget:5,80 -setTempTarget:5,0,83 -forcepstate:5,0
SET GPU6=-setBaseClockOffset:6,0,250 -setMemoryClockOffset:6,0,-1000 -setPowerTarget:6,80 -setTempTarget:6,0,83 -forcepstate:6,0
C:\CRYPTO\SOFTWARE\nvidiaInspector\nvidiaInspector.exe %GPU0% %GPU1% %GPU2% %GPU3% %GPU4% %GPU5% %GPU6%
CD %CCMINER%
ECHO Starting Miner.....
ccminer_sp.exe -r 0 -t 7 -a skein -i 25.25 -o stratum+tcp://skein.mine.zpool.ca:4933/#xnsub -b 0.0.0.0:4068 -u %ADDY% -p %PASS%
ECHO Setting optimized Clocks.....
@echo off
REM --------BLAKE2S--------
SET GPU0=-setBaseClockOffset:0,0,275 -setMemoryClockOffset:0,0,-1000 -setPowerTarget:0,80 -setTempTarget:0,0,83 -forcepstate:0,0
SET GPU1=-setBaseClockOffset:1,0,275 -setMemoryClockOffset:1,0,-1000 -setPowerTarget:1,80 -setTempTarget:1,0,83 -forcepstate:1,0
SET GPU2=-setBaseClockOffset:2,0,275 -setMemoryClockOffset:2,0,-1000 -setPowerTarget:2,80 -setTempTarget:2,0,83 -forcepstate:2,0
SET GPU3=-setBaseClockOffset:3,0,275 -setMemoryClockOffset:3,0,-1000 -setPowerTarget:3,80 -setTempTarget:3,0,83 -forcepstate:3,0
SET GPU4=-setBaseClockOffset:4,0,275 -setMemoryClockOffset:4,0,-1000 -setPowerTarget:4,80 -setTempTarget:4,0,83 -forcepstate:4,0
SET GPU5=-setBaseClockOffset:5,0,275 -setMemoryClockOffset:5,0,-1000 -setPowerTarget:5,80 -setTempTarget:5,0,83 -forcepstate:5,0
SET GPU6=-setBaseClockOffset:6,0,275 -setMemoryClockOffset:6,0,-1000 -setPowerTarget:6,80 -setTempTarget:6,0,83 -forcepstate:6,0
C:\CRYPTO\SOFTWARE\nvidiaInspector\nvidiaInspector.exe %GPU0% %GPU1% %GPU2% %GPU3% %GPU4% %GPU5% %GPU6%
CD %CCMINER%
ECHO Starting Miner.....
ccminer_tpruvot.exe -r 0 -t 7 -a blake2s -i 30 -o stratum+tcp://blake2s.mine.zpool.ca:5766/#xnsub -b 0.0.0.0:4068 -u %ADDY% -p %PASS%
goto start
Hey
Does anyone mine alt coins there? and not do the btc exchange?
If so...do you get paid out ur available mined balance in full all the time?
It doesnt seem to do that for me...especially with mining DP.
I only get portions of the available balance at time of payment. The rest sits there, hopefully to be paid out the next pay period.
Coins that are often short or with long confirmation periods are often paid only in part. The pool is currently 4900 short for DP, which is a lot for a coin with a block size of 27, even if it is not difficult to mine. I might switch payout address or go to a back up pool until the pool catches up some.Does anyone mine alt coins there? and not do the btc exchange?
If so...do you get paid out ur available mined balance in full all the time?
It doesnt seem to do that for me...especially with mining DP.
I only get portions of the available balance at time of payment. The rest sits there, hopefully to be paid out the next pay period.
OH YUP that makes much more sense now.
I remember reading that at some point on the zpool site..but too noob to absorb exactly what it meant back then..
Got it now. THANK U!!
im disabling blake2s for a few days, im already in the 700's on immatures for the week on blake2s coins... i have a few hundred worth of btc tied up in immatures from these massive delays in exchanges...
Hey
Does anyone mine alt coins there? and not do the btc exchange?
If so...do you get paid out ur available mined balance in full all the time?
It doesnt seem to do that for me...especially with mining DP.
I only get portions of the available balance at time of payment. The rest sits there, hopefully to be paid out the next pay period.
Coins that are often short or with long confirmation periods are often paid only in part. The pool is currently 4900 short for DP, which is a lot for a coin with a block size of 27, even if it is not difficult to mine. I might switch payout address or go to a back up pool until the pool catches up some. Does anyone mine alt coins there? and not do the btc exchange?
If so...do you get paid out ur available mined balance in full all the time?
It doesnt seem to do that for me...especially with mining DP.
I only get portions of the available balance at time of payment. The rest sits there, hopefully to be paid out the next pay period.
Hey
Does anyone mine alt coins there? and not do the btc exchange?
If so...do you get paid out ur available mined balance in full all the time?
It doesnt seem to do that for me...especially with mining DP.
I only get portions of the available balance at time of payment. The rest sits there, hopefully to be paid out the next pay period.
Does anyone mine alt coins there? and not do the btc exchange?
If so...do you get paid out ur available mined balance in full all the time?
It doesnt seem to do that for me...especially with mining DP.
I only get portions of the available balance at time of payment. The rest sits there, hopefully to be paid out the next pay period.
or you could just run of my batch's already done just choose the algos you want..
and use software to OC and UV (EVGA - Software - Precision XOC)
and use software to OC and UV (EVGA - Software - Precision XOC)
I know what your miner does... what im talking about is as the pool switches the algo, the new algo starts up and changes the OC and UV settings i have preprogrammed in the batch file to that specific algo... right now i only have it working on skein, blake2s, and equihash... basically it allows me to run the memory intensive algo's with +400ish on memory on them, then when it switches to skein it drops down the memory by 1000 and rasies the core by +317 on the GPU's on the rig i have been testing it on...
or you could just run of my batch's already done just choose the algos you want..
and use software to OC and UV (EVGA - Software - Precision XOC)
and use software to OC and UV (EVGA - Software - Precision XOC)
Little concerned... the api earnings are not matching up to my earnings today... looks like today will be one of the lowest payed days in a while....
hmq1725 is broke need to disable it for now..
Im currently only mining equihash, skein, and blake2s as my rotation
equihash i find doesnt perform that well so i have it disabled myself..
skein i also have disabled
blake2s has tanked in price last 48hours as it got added to "nicehash"
i run -Algorithm hmq1725,groestl,timetravel,sib,bitcore,x17,blakecoin,Nist5,MyriadGroestl,Lyra2RE2,neoscrypt,blake2s
I need to sit down and take the time to rewrite my batch file... i recently learned how to tune the cards via the batch file so it switches core and mem settings when it starts a new algo... atleast on the pascal cards....not figured it out on any other cards yet
Jump to: