Topic: Kialara Physical Bitcoins/HAVEN: Update - page 16. (Read 70103 times)
I should fly out and hand pick up my series. Would be great to see Max again and enjoy the weather. I'll have to make some room on my shelf for this new series next to my thug life piece, and the other kialara collection. Keep up the great work Max!
I really can't wait to get this bar. I'm sure it will look even better in person as with all Kialara's.
From http://kialara.com/moon-production-updates/
Quote
Everything is going smoothly with assembly. There are some tasks that have taken more time than I would like… for example of the 5,000 holograms I ordered, only 1 in 10 have the square window centered inside the circle. It’s enough to complete these, but took almost a full day to inspect each. http://imgur.com/oIOJ2bE I do have someone helping me with some of the smaller tasks to help get these shipped sooner… even just unwrapping the 400 housings, 400 clips and 800 circular retaining rings from their factory packaging was a full day with help.
The NWA5000 samples have been loaded into around 1/2 of the bars, and I’m still cutting the rest. It’s a very slow process and is something I’ve spent the better part of the last week or two working on – I plan to take some photos of this process to share soon. I have gone through a dozen diamond coated saw blades already.
My goal is for shipping to begin this Friday, so I will post a new update by then.
P.S. I have also been shipping out signature series (bars/prints) orders, which I fell a little behind on – so if you’re waiting on these, know that you will be receiving them any day now.
The NWA5000 samples have been loaded into around 1/2 of the bars, and I’m still cutting the rest. It’s a very slow process and is something I’ve spent the better part of the last week or two working on – I plan to take some photos of this process to share soon. I have gone through a dozen diamond coated saw blades already.
My goal is for shipping to begin this Friday, so I will post a new update by then.
P.S. I have also been shipping out signature series (bars/prints) orders, which I fell a little behind on – so if you’re waiting on these, know that you will be receiving them any day now.
You missed a great pic, it was embedded in "bars" above... http://imgur.com/vSuWi8E
Everything sounds great, I recently received my Signature Series bar and knew the Moon series isn't far behind!
From http://kialara.com/moon-production-updates/
Quote
Everything is going smoothly with assembly. There are some tasks that have taken more time than I would like… for example of the 5,000 holograms I ordered, only 1 in 10 have the square window centered inside the circle. It’s enough to complete these, but took almost a full day to inspect each. http://imgur.com/oIOJ2bE I do have someone helping me with some of the smaller tasks to help get these shipped sooner… even just unwrapping the 400 housings, 400 clips and 800 circular retaining rings from their factory packaging was a full day with help.
The NWA5000 samples have been loaded into around 1/2 of the bars, and I’m still cutting the rest. It’s a very slow process and is something I’ve spent the better part of the last week or two working on – I plan to take some photos of this process to share soon. I have gone through a dozen diamond coated saw blades already.
My goal is for shipping to begin this Friday, so I will post a new update by then.
P.S. I have also been shipping out signature series (bars/prints) orders, which I fell a little behind on – so if you’re waiting on these, know that you will be receiving them any day now.
The NWA5000 samples have been loaded into around 1/2 of the bars, and I’m still cutting the rest. It’s a very slow process and is something I’ve spent the better part of the last week or two working on – I plan to take some photos of this process to share soon. I have gone through a dozen diamond coated saw blades already.
My goal is for shipping to begin this Friday, so I will post a new update by then.
P.S. I have also been shipping out signature series (bars/prints) orders, which I fell a little behind on – so if you’re waiting on these, know that you will be receiving them any day now.
Awesome news! I can't describe how much I'm looking forward to receiving my bars
. Got a lot of them incoming so it feels like Christmas morning. That's awesome news. I can't express how much I am looking forward to having my Suite delivered at my doorstep
. I am getting an awesome custom case made for them.
More good news, all parts will ship to me tomorrow, and the engravings look excellent and in the right location (slightly off-center on the clips so that they will be centered on the bars) I’m hoping to have parts in hand so I can work on assembly and begin shipping next week.
http://imgur.com/LEGIfVH
http://imgur.com/LEGIfVH
Another small update
http://kialara.com/moon-production-updates/
Quote
06/25/2017 Update
I received word that the factory was working overtime this weekend to complete production. I should be back with a new update late tomorrow evening or early Tuesday. I expect these to ship to me any day.
I received word that the factory was working overtime this weekend to complete production. I should be back with a new update late tomorrow evening or early Tuesday. I expect these to ship to me any day.
http://kialara.com/moon-production-updates/
good news, the housings and sliding clips have all been completed and the hand-polishing process is complete. Late last night I worked with the factory to make sure the engravings were in the correct location. All of the engraving work should be completed by tomorrow, at which point all pieces will go through a final quality control inspection, and then shipped out. I ordered extra assemblies to make sure I had plenty on hand if some did not pass inspection. So hopefully the next update will be shared Friday to confirm all pieces have shipped. Thanks again everyone.
http://imgur.com/cJVCWV3
http://imgur.com/lsFx1sF
http://imgur.com/6yHAi1Q
What these started as: http://imgur.com/oTvhg2Y
http://imgur.com/cJVCWV3
http://imgur.com/lsFx1sF
http://imgur.com/6yHAi1Q
What these started as: http://imgur.com/oTvhg2Y
Thanks for the update.
Looking forward to getting these in hand!!
Thanks Kialara for the updates and amazing work!
Nice update indeed! I can't wait until these are in hand and we can see those juicy pictures. I was a bit surprised at the "low" prices on the auction that Zepher recently ran for these.. I do believe though that once Max has shipped them all out they'll have a pretty big pricetag. I'm still a bit sad that I did not get my hands on these from the website but as is life, lol.
Nice update, looking forward to see them in people's hands and possibly on sale/auction 
FTFY 
I think its unlikely we will see any more suites up for auction. although the sets and singles I am sure will be traded
Nice update, looking forward to see them in people's hands and possibly on sale/auction
FTFY 
Nice update, looking forward to see them in people's hands and possibly on sale/auction
good news, the housings and sliding clips have all been completed and the hand-polishing process is complete. Late last night I worked with the factory to make sure the engravings were in the correct location. All of the engraving work should be completed by tomorrow, at which point all pieces will go through a final quality control inspection, and then shipped out. I ordered extra assemblies to make sure I had plenty on hand if some did not pass inspection. So hopefully the next update will be shared Friday to confirm all pieces have shipped. Thanks again everyone.
http://imgur.com/cJVCWV3
http://imgur.com/lsFx1sF
http://imgur.com/6yHAi1Q
What these started as: http://imgur.com/oTvhg2Y
http://imgur.com/cJVCWV3
http://imgur.com/lsFx1sF
http://imgur.com/6yHAi1Q
What these started as: http://imgur.com/oTvhg2Y
Nice one Max - these will be awesome
good news, the housings and sliding clips have all been completed and the hand-polishing process is complete. Late last night I worked with the factory to make sure the engravings were in the correct location. All of the engraving work should be completed by tomorrow, at which point all pieces will go through a final quality control inspection, and then shipped out. I ordered extra assemblies to make sure I had plenty on hand if some did not pass inspection. So hopefully the next update will be shared Friday to confirm all pieces have shipped. Thanks again everyone.
http://imgur.com/cJVCWV3
http://imgur.com/lsFx1sF
http://imgur.com/6yHAi1Q
What these started as: http://imgur.com/oTvhg2Y
http://imgur.com/cJVCWV3
http://imgur.com/lsFx1sF
http://imgur.com/6yHAi1Q
What these started as: http://imgur.com/oTvhg2Y
wow its so beautiful. a piece of artwork. if have the money ill buy one of these are these physical coins have a real value sir?
Thank you silverkamote. Most coins, bars and some artworks here, mine included, have a collectible value in addition to an actual bitcoin value if the work is 'funded', meaning someone sent BTC to the address included on the piece. All of my works are sold unfunded, and it is up to the owner to decide on using them as cold storage devices.
wow its so beautiful. a piece of artwork. if have the money ill buy one of these are these physical coins have a real value sir?
Jump to: