TRUCKCOIN BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Wallet Version Ver 1.0.0.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: TruckcoinBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a Truckcoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from TruckcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Truckcoin
Then open Truckcoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Truckcoin is closed
Go under c:\Users\"username"\AppData\Roaming\Truckcoin (for Windows) or in the Truckcoin data folder for other OSes
Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from TruckcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Truckcoin
Then open Truckcoin and it will start syncing the BlockChain from the last snapshot.
Once your Truckcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Truckcoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
http://www.presstab.pw/phpexplorer/TRK/nodes.php
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
Topic: Kiklo's Premium Blockchain Snapshot Service (Read 1189 times)
SATIVACOIN BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Wallet Version v1.3.0.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: SativacoinBlockchainSnapshot-2017-4-24.rar
SHA-256: D0B1EC5D49D55D98DDD94C5D18E1D8A3984130E9BC4636A4C5CCC73581618DA5
Direct Link : https://mega.nz/#!jUIBWLSK!ME2ZgcjsnyOcQbyY1mGi3cESIYF6PeVHFjTlbH6f3fU
General Link: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
http://onlinemd5.com can be used to verify the above SHA-256 checksums.
NEW Wallet: Install Instructions
Make a Sativacoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from SativacoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\sativacoin
Then open Sativacoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Sativacoin is closed
Go under c:\Users\"username"\AppData\Roaming\Sativacoin (for Windows) or in the Sativacoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from SativacoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\sativacoin
Then open Sativacoin and it will start syncing the BlockChain from the last snapshot.
Once your Sativacoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Sativacoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://www.cryptopia.co.nz/BlockExplorer?coin=STV
Premium Service Status => Active = SnapShot & BootStrap Updated Every 2 Weeks
ZEIT Address => MZYR3sPeVJPRbPfLoVyhjUMbcJxGhcajVD
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Wallet Version v1.3.0.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: SativacoinBlockchainSnapshot-2017-4-24.rar
SHA-256: D0B1EC5D49D55D98DDD94C5D18E1D8A3984130E9BC4636A4C5CCC73581618DA5
Direct Link : https://mega.nz/#!jUIBWLSK!ME2ZgcjsnyOcQbyY1mGi3cESIYF6PeVHFjTlbH6f3fU
General Link: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
http://onlinemd5.com can be used to verify the above SHA-256 checksums.
NEW Wallet: Install Instructions
Make a Sativacoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from SativacoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\sativacoin
Then open Sativacoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Sativacoin is closed
Go under c:\Users\"username"\AppData\Roaming\Sativacoin (for Windows) or in the Sativacoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from SativacoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\sativacoin
Then open Sativacoin and it will start syncing the BlockChain from the last snapshot.
Once your Sativacoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Sativacoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://www.cryptopia.co.nz/BlockExplorer?coin=STV
Premium Service Status => Active = SnapShot & BootStrap Updated Every 2 Weeks
ZEIT Address => MZYR3sPeVJPRbPfLoVyhjUMbcJxGhcajVD
Click Here to See a List of All Available SnapShots.
BOTTLECAPS BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Wallet Version Ver 2.2.2.0-g418187240-Caps2.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: BottlecapsBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a BottleCaps folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BottlecapsBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BottleCaps
Then open BottleCaps and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Bottlecaps is closed
Go under c:\Users\"username"\AppData\Roaming\BottleCaps (for Windows) or in the BottleCaps data folder for other OSes
Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from BottlecapsBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BottleCaps\
Then open Bottlecaps and it will start syncing the BlockChain from the last snapshot.
Once your BottleCaps Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Bottlecaps-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
http://www.presstab.pw/phpexplorer/CAP/nodes.php
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Wallet Version Ver 2.2.2.0-g418187240-Caps2.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: BottlecapsBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a BottleCaps folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BottlecapsBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BottleCaps
Then open BottleCaps and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Bottlecaps is closed
Go under c:\Users\"username"\AppData\Roaming\BottleCaps (for Windows) or in the BottleCaps data folder for other OSes
Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from BottlecapsBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BottleCaps\
Then open Bottlecaps and it will start syncing the BlockChain from the last snapshot.
Once your BottleCaps Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Bottlecaps-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
http://www.presstab.pw/phpexplorer/CAP/nodes.php
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
BLACKCOIN BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Wallet Version Ver 1.2.4 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: BlackcoinBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a BlackCoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BlackcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BlackCoin
Then open Blackcoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Blackcoin is closed
Go under c:\Users\"username"\AppData\Roaming\BlackCoin (for Windows) or in the BlackCoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from BlackcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BlackCoin
Then open Blackcoin and it will start syncing the BlockChain from the last snapshot.
Once your Blackcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Blackcoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://chainz.cryptoid.info/blk/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Wallet Version Ver 1.2.4 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: BlackcoinBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a BlackCoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BlackcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BlackCoin
Then open Blackcoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Blackcoin is closed
Go under c:\Users\"username"\AppData\Roaming\BlackCoin (for Windows) or in the BlackCoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from BlackcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BlackCoin
Then open Blackcoin and it will start syncing the BlockChain from the last snapshot.
Once your Blackcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Blackcoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://chainz.cryptoid.info/blk/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
NOBLECOIN BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Wallet Version Ver 2.0.2.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: NobleBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a NoblecoinPOS folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from NobleBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\NoblecoinPOS
Then open Noblecoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Noblecoin is closed
Go under c:\Users\"username"\AppData\Roaming\NoblecoinPOS (for Windows) or in the NoblecoinPOS data folder for other OSes
Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from NobleBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\NoblecoinPOS\
Then open Noblecoin and it will start syncing the BlockChain from the last snapshot.
Once your Noblecoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Noblecoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://chainz.cryptoid.info/nobl/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Wallet Version Ver 2.0.2.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: NobleBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a NoblecoinPOS folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from NobleBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\NoblecoinPOS
Then open Noblecoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Noblecoin is closed
Go under c:\Users\"username"\AppData\Roaming\NoblecoinPOS (for Windows) or in the NoblecoinPOS data folder for other OSes
Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from NobleBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\NoblecoinPOS\
Then open Noblecoin and it will start syncing the BlockChain from the last snapshot.
Once your Noblecoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Noblecoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://chainz.cryptoid.info/nobl/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
SPROUTS BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Wallet Version Ver 0.1.22-gd0cbc83 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: SproutsBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
http://onlinemd5.com can be used to verify the above checksums.
NEW Wallet: Install Instructions
Make a Sprouts folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from SproutsBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Sprouts
Then open Sprouts and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Sprouts is closed
Go under c:\Users\"username"\AppData\Roaming\Sprouts (for Windows) or in the Sprouts data folder for other OSes
Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from SproutsBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Sprouts\
Then open Sprouts and it will start syncing the BlockChain from the last snapshot.
Once your Sprouts Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Sprouts.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://www.coinexchange.io/network/peers/SPRTS
https://chainz.cryptoid.info/sprts/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Wallet Version Ver 0.1.22-gd0cbc83 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: SproutsBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
http://onlinemd5.com can be used to verify the above checksums.
NEW Wallet: Install Instructions
Make a Sprouts folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from SproutsBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Sprouts
Then open Sprouts and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Sprouts is closed
Go under c:\Users\"username"\AppData\Roaming\Sprouts (for Windows) or in the Sprouts data folder for other OSes
Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from SproutsBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Sprouts\
Then open Sprouts and it will start syncing the BlockChain from the last snapshot.
Once your Sprouts Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Sprouts.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://www.coinexchange.io/network/peers/SPRTS
https://chainz.cryptoid.info/sprts/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
BTCTALKCOIN BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Wallet Version Ver 1.5.2.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: BTCtalkBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a BTCtalkcoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BTCtalkBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BTCtalkcoin
Then open BTCtalkcoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure BTCtalkcoin is closed
Go under c:\Users\"username"\AppData\Roaming\BTCtalkcoin (for Windows) or in the BTCtalkcoin data folder for other OSes
Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from BTCtalkcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BTCtalkcoin\
Then open BTCtalkcoin and it will start syncing the BlockChain from the last snapshot.
Once your BTCtalkcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run BTCtalkcoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://chainz.cryptoid.info/talk/#!network
https://novaexchange.com/addnodes/TALK/
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Wallet Version Ver 1.5.2.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: BTCtalkBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a BTCtalkcoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BTCtalkBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\BTCtalkcoin
Then open BTCtalkcoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure BTCtalkcoin is closed
Go under c:\Users\"username"\AppData\Roaming\BTCtalkcoin (for Windows) or in the BTCtalkcoin data folder for other OSes
Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log
Then Delete 1 folder named : database
Then Extract and copy the files from BTCtalkcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\BTCtalkcoin\
Then open BTCtalkcoin and it will start syncing the BlockChain from the last snapshot.
Once your BTCtalkcoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run BTCtalkcoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://chainz.cryptoid.info/talk/#!network
https://novaexchange.com/addnodes/TALK/
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
BITBEAN BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Wallet Version Ver 1.1.0.0-g32a928eRC1 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: BitBeanBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a Bitbean folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BitBeanBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Bitbean
Then open Bitbean and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Bitbean is closed
Go under c:\Users\"username"\AppData\Roaming\Bitbean (for Windows) or in the Bitbean data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from BitbeanBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Bitbean
Then open Bitbean and it will start syncing the BlockChain from the last snapshot.
Once your Bitbean Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Bitbean-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://chainz.cryptoid.info/bitb/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Wallet Version Ver 1.1.0.0-g32a928eRC1 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: BitBeanBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a Bitbean folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from BitBeanBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Bitbean
Then open Bitbean and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Bitbean is closed
Go under c:\Users\"username"\AppData\Roaming\Bitbean (for Windows) or in the Bitbean data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from BitbeanBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Bitbean
Then open Bitbean and it will start syncing the BlockChain from the last snapshot.
Once your Bitbean Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Bitbean-qt.exe -rescan
will take a little while but should correct your balance info.
List of AddNodes
https://chainz.cryptoid.info/bitb/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
SUPERCOIN BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Wallet Version Ver 4.0.1.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: SupercoinBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
* File is over 1 Gig , Download with MegaSync *
NEW Wallet: Install Instructions
Make a Supercoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from SupercoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Supercoin
Then open Supercoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Supercoin is closed
Go under c:\Users\"username"\AppData\Roaming\Supercoin (for Windows) or in the Supercoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from SupercoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Supercoin
Then open Supercoin and it will start syncing the BlockChain from the last snapshot.
Once your Supercoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Supercoin-qt.exe -rescan
will take a little while but should correct your balance info.
(This Snapshot is ~2gig, if your internet access is too slow to download the snapshot, use the Bootstrap instead.)
List of Addnodes:
https://chainz.cryptoid.info/super/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Wallet Version Ver 4.0.1.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: SupercoinBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
* File is over 1 Gig , Download with MegaSync *
NEW Wallet: Install Instructions
Make a Supercoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from SupercoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Supercoin
Then open Supercoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Supercoin is closed
Go under c:\Users\"username"\AppData\Roaming\Supercoin (for Windows) or in the Supercoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from SupercoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Supercoin
Then open Supercoin and it will start syncing the BlockChain from the last snapshot.
Once your Supercoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Supercoin-qt.exe -rescan
will take a little while but should correct your balance info.
(This Snapshot is ~2gig, if your internet access is too slow to download the snapshot, use the Bootstrap instead.)
List of Addnodes:
https://chainz.cryptoid.info/super/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
SUPERCOIN BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Wallet Version Ver 4.0.1.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: SupercoinBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
* File is over 1 Gig , Download with MegaSync *
NEW Wallet: Install Instructions
Make a Supercoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from SupercoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Supercoin
Then open Supercoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Supercoin is closed
Go under c:\Users\"username"\AppData\Roaming\Supercoin (for Windows) or in the Supercoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from SupercoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Supercoin
Then open Supercoin and it will start syncing the BlockChain from the last snapshot.
Once your Supercoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Supercoin-qt.exe -rescan
will take a little while but should correct your balance info.
(This Snapshot is ~2gig, if your internet access is too slow to download the snapshot, use the Bootstrap instead.)
List of Addnodes:
https://chainz.cryptoid.info/super/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Wallet Version Ver 4.0.1.0 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: SupercoinBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
* File is over 1 Gig , Download with MegaSync *
NEW Wallet: Install Instructions
Make a Supercoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from SupercoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Supercoin
Then open Supercoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Supercoin is closed
Go under c:\Users\"username"\AppData\Roaming\Supercoin (for Windows) or in the Supercoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from SupercoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Supercoin
Then open Supercoin and it will start syncing the BlockChain from the last snapshot.
Once your Supercoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run Supercoin-qt.exe -rescan
will take a little while but should correct your balance info.
(This Snapshot is ~2gig, if your internet access is too slow to download the snapshot, use the Bootstrap instead.)
List of Addnodes:
https://chainz.cryptoid.info/super/#!network
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
KOBOCOIN BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Wallet Version v2.1.0.3 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: KoboBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
http://onlinemd5.com can be used to verify the above checksums.
NEW Wallet: Install Instructions
Make a Kobocoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from KobocoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Kobocoin
Then open Kobocoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Kobocoin is closed
Go under c:\Users\"username"\AppData\Roaming\Kobocoin (for Windows) or in the Kobocoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from KobocoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Kobocoin
Then open Kobocoin and it will start syncing the BlockChain from the last snapshot.
Once your Kobocoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run kobocoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of Addnodes:
http://www.presstab.pw/phpexplorer/KOBO/nodes.php
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Wallet Version v2.1.0.3 used with this SnapShot.
_______________________________________________________________________________ _____________________
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: KoboBlockChainSnapShot-(Date Created).rar
Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
http://onlinemd5.com can be used to verify the above checksums.
NEW Wallet: Install Instructions
Make a Kobocoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from KobocoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Kobocoin
Then open Kobocoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Kobocoin is closed
Go under c:\Users\"username"\AppData\Roaming\Kobocoin (for Windows) or in the Kobocoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from KobocoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Kobocoin
Then open Kobocoin and it will start syncing the BlockChain from the last snapshot.
Once your Kobocoin Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run kobocoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of Addnodes:
http://www.presstab.pw/phpexplorer/KOBO/nodes.php
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
HOBONICKEL BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Version 1.5.1.0-gf46fa0c-V1.5 used with this Snapshot
_______________________________________________________________________________ ____
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: HBNBlockChainSnapShot-(Date Created).rar
Download: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a HoboNickels folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from HBNBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\HoboNickels
Then open HoboNickels-qt.exe and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure HoboNickels is closed
Go under c:\Users\"username"\AppData\Roaming\HoboNickels (for Windows) or in the HBN data folder for other OSes
Then Delete 5 files : .lock & blk0001.dat & blk0002 & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from HBNBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\HoboNickels
Then open HoboNickel and it will start syncing the BlockChain from the last snapshot.
Once your HBN Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run HoboNickels-qt.exe -rescan
will take a little while but should correct your balance info.
List of Addnodes:
http://www.presstab.pw/phpexplorer/HBN/nodes.php
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Version 1.5.1.0-gf46fa0c-V1.5 used with this Snapshot
_______________________________________________________________________________ ____
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: HBNBlockChainSnapShot-(Date Created).rar
Download: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
NEW Wallet: Install Instructions
Make a HoboNickels folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from HBNBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\HoboNickels
Then open HoboNickels-qt.exe and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure HoboNickels is closed
Go under c:\Users\"username"\AppData\Roaming\HoboNickels (for Windows) or in the HBN data folder for other OSes
Then Delete 5 files : .lock & blk0001.dat & blk0002 & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from HBNBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\HoboNickels
Then open HoboNickel and it will start syncing the BlockChain from the last snapshot.
Once your HBN Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run HoboNickels-qt.exe -rescan
will take a little while but should correct your balance info.
List of Addnodes:
http://www.presstab.pw/phpexplorer/HBN/nodes.php
Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months
Click Here to See a List of All Available SnapShots.
ZEIT BLOCKCHAIN SNAPSHOT
(The Fastest Way to Sync)
Latest Version 2.0.1.7 Gauntlet
Windows: www.zeit-coin.net/beta/zeitcoin-qt.exe
MacOS: http://zeit-coin.net/beta/zeitcoin-2017-gauntlet.dmg
Linux : https://github.com/zeitcoin/zeitcoin
_______________________________________________________________________________ ____
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: ZeitBlockChainSnapShot-2017-05-10.rar
SHA-256: B9D8F5E9A6ACEB4181452913A877BB8C00103D8D70A9D3708F673A6AF1DC1FBE
Direct Link : https://mega.nz/#!GNYAHYjb!gnfY9OsKoE8aGvrf2bQlTT5j8fsZO2PQS12EtpN1t2c
General Link: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
http://onlinemd5.com can be used to verify the above checksums.
NEW Wallet: Install Instructions
Make a Zeitcoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from ZeitcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Zeitcoin
Then open Zeitcoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Zeitcoin is closed
Go under c:\Users\"username"\AppData\Roaming\Zeitcoin (for Windows) or in the Zeitcoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from ZeitcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Zeitcoin
Then open Zeitcoin and it will start syncing the BlockChain from the last snapshot.
Once your Zeit Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run zeitcoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of Addnodes:
https://chainz.cryptoid.info/zeit/#!network
Click Here to See a List of All Available SnapShots.
(The Fastest Way to Sync)
Latest Version 2.0.1.7 Gauntlet
Windows: www.zeit-coin.net/beta/zeitcoin-qt.exe
MacOS: http://zeit-coin.net/beta/zeitcoin-2017-gauntlet.dmg
Linux : https://github.com/zeitcoin/zeitcoin
_______________________________________________________________________________ ____
You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm
Filename: ZeitBlockChainSnapShot-2017-05-10.rar
SHA-256: B9D8F5E9A6ACEB4181452913A877BB8C00103D8D70A9D3708F673A6AF1DC1FBE
Direct Link : https://mega.nz/#!GNYAHYjb!gnfY9OsKoE8aGvrf2bQlTT5j8fsZO2PQS12EtpN1t2c
General Link: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg
http://onlinemd5.com can be used to verify the above checksums.
NEW Wallet: Install Instructions
Make a Zeitcoin folder under C:\Users\"username"\AppData\Roaming\
Then Extract and copy the files from ZeitcoinBlockchainSnapShot.rar into
C:\Users\"username"\AppData\Roaming\Zeitcoin
Then open Zeitcoin and it will start syncing the BlockChain from the last snapshot.
ACTIVE Wallet:Install Instructions ,
(Be sure to have a backup of your Wallet.dat 1st)
Make sure Zeitcoin is closed
Go under c:\Users\"username"\AppData\Roaming\Zeitcoin (for Windows) or in the Zeitcoin data folder for other OSes
Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log
Then Delete 2 folders named : database & txleveldb
Then Extract and copy the files from ZeitcoinBlockchainSnapshot into
C:\Users\"username"\AppData\Roaming\Zeitcoin
Then open Zeitcoin and it will start syncing the BlockChain from the last snapshot.
Once your Zeit Wallet is completely Synced.
Check your Balance, if the Balance is incorrect.
Click on Help, click Debug Window, click Console,
type in repairwallet and hit enter, then check your Balance
If Balance is still not correct.
Then From a Command Prompt run zeitcoin-qt.exe -rescan
will take a little while but should correct your balance info.
List of Addnodes:
https://chainz.cryptoid.info/zeit/#!network
Click Here to See a List of All Available SnapShots.
How to install a Bootstrap.dat file
After downloading and uncompressing the rar file ,
Start up your new Wallet software,
after it opens, then Close it, (In windows , this allows the new wallet to create the folder under C:\Users\"username"\AppData\Roaming\WalletNameHere )
Copy the bootstrap.dat file in the folder c:\Users\"username"\AppData\Roaming\WalletNameHere (for Windows) or in the WalletNameHere data folder for other OSes. Now Start the New Wallet to import the BootStrap.dat , (Depending on your PC and the size of the bootstrap , this can take many hours) (You can watch the progress of the import by opening the folder c:\Users\"username"\AppData\Roaming\WalletNameHere and watch the blk0001.dat file size to see how close it is to the bootstrap.dat to get a feel for how much longer it might be) once finished it will then begin synchronization to retrieve any blocks found after the Bootstrap was created. (Tech Note, the wallet does not completely Open until it finishes the Import.)
Bootstraps can be downloaded from the Blockchain Folder at
https://mega.nz/#F!CJRnyDDL!vbYN-3mvj9RBE7Phl27Sjg
After downloading and uncompressing the rar file ,
Start up your new Wallet software,
after it opens, then Close it, (In windows , this allows the new wallet to create the folder under C:\Users\"username"\AppData\Roaming\WalletNameHere )
Copy the bootstrap.dat file in the folder c:\Users\"username"\AppData\Roaming\WalletNameHere (for Windows) or in the WalletNameHere data folder for other OSes. Now Start the New Wallet to import the BootStrap.dat , (Depending on your PC and the size of the bootstrap , this can take many hours) (You can watch the progress of the import by opening the folder c:\Users\"username"\AppData\Roaming\WalletNameHere and watch the blk0001.dat file size to see how close it is to the bootstrap.dat to get a feel for how much longer it might be) once finished it will then begin synchronization to retrieve any blocks found after the Bootstrap was created. (Tech Note, the wallet does not completely Open until it finishes the Import.)
Bootstraps can be downloaded from the Blockchain Folder at
https://mega.nz/#F!CJRnyDDL!vbYN-3mvj9RBE7Phl27Sjg
Kiklo's Premium Blockchain Snapshot Service
You will need a program that can uncompress rar files to access the files.
example: http://rarlabs.com/download.htm
Tech Tips: Always scan a download for Viruses before installing , one such service is https://www.virustotal.com .
Our Blockchain Snapshots can be installed on a New or Already Working Wallet.
SnapShots will install much Faster than the BootStraps.
Difference between a Bootstrap vs a Snapshot.
Instructions on How to Install a Bootstrap.dat file is on the very next Post.
Instructions on How to Install a SnapShot is included when you click on the SnapShot Link in the following table.
_______________________________________________________________________________ _____
Services for BlockChain SnapShots
Direct Link to Snapshot download
Exact Date created included in the Snapshot Post
SHA-256 Hash Generated so you can verify the File download matches the original created file.
Snapshot & BootStrap Updated every 2 weeks
Current Price is 250 thousand ZEIT per month per coin to add these options.
(Only ZEIT Accepted)
Direct Link to the top of this OP.
You will need a program that can uncompress rar files to access the files.
example: http://rarlabs.com/download.htm
Tech Tips: Always scan a download for Viruses before installing , one such service is https://www.virustotal.com .
Our Blockchain Snapshots can be installed on a New or Already Working Wallet.
SnapShots will install much Faster than the BootStraps.
Difference between a Bootstrap vs a Snapshot.
Instructions on How to Install a Bootstrap.dat file is on the very next Post.
Instructions on How to Install a SnapShot is included when you click on the SnapShot Link in the following table.
_______________________________________________________________________________ _____
Services for BlockChain SnapShots
Direct Link to Snapshot download
Exact Date created included in the Snapshot Post
SHA-256 Hash Generated so you can verify the File download matches the original created file.
Snapshot & BootStrap Updated every 2 weeks
Current Price is 250 thousand ZEIT per month per coin to add these options.
(Only ZEIT Accepted)
Direct Link to the top of this OP.
Code:
[url=https://bitcointalk.org/index.php?topic=1910100.msg18953386#msg18953386]Kiklo's Premium Blockchain Snapshot Service [/url]
Jump to: