Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner - page 176.

SplinterZalinsk

full member

Activity: 227

Merit: 100

Quote from: Ryancope123 on July 04, 2017, 01:49:30 AM

Quote from: crypticj on July 04, 2017, 01:22:23 AM

Quote from: blah01 on July 04, 2017, 01:18:05 AM

shouldnt the prices go down as the same machine comes out with increased difficulty?

Yes logically yes, however price of LTC is staying ahead of difficulty and also people are using there L3+ to mine altcoins as oppose to LTC only because altcoins are around 20-25% more profitable so the ROI is faster.

what other coins are people mining ? mine arrives anytime now and i am interested to see what others are mining?

You can mine any scrypt coin

Ryancope123

sr. member

Activity: 277

Merit: 250

Quote from: crypticj on July 04, 2017, 01:22:23 AM

Quote from: blah01 on July 04, 2017, 01:18:05 AM

shouldnt the prices go down as the same machine comes out with increased difficulty?

Yes logically yes, however price of LTC is staying ahead of difficulty and also people are using there L3+ to mine altcoins as oppose to LTC only because altcoins are around 20-25% more profitable so the ROI is faster.

what other coins are people mining ? mine arrives anytime now and i am interested to see what others are mining?

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: SplinterZalinsk on July 03, 2017, 08:57:19 PM

Quote from: SplinterZalinsk on July 02, 2017, 07:54:34 PM

The power cord for APW3++ is not included... Bitmain says: "please find one with at least 10A from your local market."
What are the recommendations for the cable regarding the size of the cable, etc? Is there any limit about how long the cable is for run the miners (24/7) in 100% safe way?
Do you guys recommend any specific cable?

Can I use a 100ft 12AWG 15A extension cord cable like this: http://amzn.to/2skyd07 for L3+/APW3++ safely running 24/7?

er NO

just go and get some say 3/4" electrical conduit....and box it out that way ..even if it is on the floor...would be what I would do
to be safe.....

my setup with sub panels (50 amp) 4 20 amp circuits.I simply run one to a miner in my basement for overkill.

lostgonzo.imgur.com

dig around the pics..also have push fans to match the shutter fan moving air

the above is all over on how to do on youtube ...so not a big deal to do

but don't use a long cord..that would be silly imho and maybe not safe (damage) etc

aleksand

legendary

Activity: 868

Merit: 1000

I had been waiting for litecoin miner i have even tried he new router miner from BITMAIN, the device is fine but it is kind of very costly in terms when you compare it with other company product.

crypticj

sr. member

Activity: 873

Merit: 268

Quote from: blah01 on July 04, 2017, 01:18:05 AM

shouldnt the prices go down as the same machine comes out with increased difficulty?

Yes logically yes, however price of LTC is staying ahead of difficulty and also people are using there L3+ to mine altcoins as oppose to LTC only because altcoins are around 20-25% more profitable so the ROI is faster.

blah01

sr. member

Activity: 291

Merit: 250

shouldnt the prices go down as the same machine comes out with increased difficulty?

CryptoCrane

sr. member

Activity: 384

Merit: 256

Quote from: bel123 on July 03, 2017, 10:34:57 AM

anybody want to sell L3+?

If you don't want to wait, you can pick up some from the July batch on Amazon. They're priced really really high - so it may be better to just grab one of the late Sept batches for 40ltc. Most people purchasing from us on Amazon are doing so because they want to use credit cards and also want all of the built-in consumer protections that Amazon offers. Plus, if you need to return it for some reason, you don't have to ship to China.

SplinterZalinsk

full member

Activity: 227

Merit: 100

Quote from: SplinterZalinsk on July 02, 2017, 07:54:34 PM

The power cord for APW3++ is not included... Bitmain says: "please find one with at least 10A from your local market."
What are the recommendations for the cable regarding the size of the cable, etc? Is there any limit about how long the cable is for run the miners (24/7) in 100% safe way?
Do you guys recommend any specific cable?

Can I use a 100ft 12AWG 15A extension cord cable like this: http://amzn.to/2skyd07 for L3+/APW3++ safely running 24/7?

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

Quote from: Micky25 on July 03, 2017, 01:22:56 AM

Quote from: Searing on July 02, 2017, 06:47:11 AM

on the other hand...perhaps..just perhaps...I shoulda saved the like Paid Out 12490.662295630000 LTC from www.litecoinpool.org it shows me from accounts that at todays LTC rate of $37.70 is $470,897.97 usd...ouch.......ouch....ouch......this is all the hash I've made accumulating LTC since Nov 8th 2014 with my first knc Titan.

well played Sir, rock on Cool

Heh every virgin odd ball coin I ever made (less elec and equip) since 2013 I should
Have held and kept 'virgin'. I'd have a bit over 3/4 of a million dollars. Playing it safe I made 1/3
Of a million (on paper etc)

Silly hobby keeps you humble. I'm like a monkey running the roller coaster. Having a lot
Of fun. But completely clueless.

bel123

member

Activity: 97

Merit: 10

anybody want to sell L3+?

SplinterZalinsk

full member

Activity: 227

Merit: 100

Quote from: lavdimi on July 03, 2017, 10:12:51 AM

Quote from: SplinterZalinsk on July 03, 2017, 10:08:02 AM

Quote from: lavdimi on July 03, 2017, 09:58:45 AM

Quote from: SplinterZalinsk on June 22, 2017, 03:58:26 PM

The APW3++ for S9 (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679) is 100% identical to The APW3++ for L3+ (https://shop.bitmain.com/productDetail.htm?pid=000201706190812304704Fch048r0646), except the interface type. It's '5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)' in APW3++ for S9 and it's '9 pairs of 6 pin PCI-E connectors (i.e. 18 connectors)' in APW3++ for L3+. So, if you will run only 1 L3+/APW3++ in a 110v like me (you can't run more than 1 L3+/APW3++ in 110v anyway)... you can get the APW3++ for S9 (July batch still available) to run your L3+ and it will be 100% identical to using APW3++ for L3+! Plus it's $10 cheaper each that savings $40 in my case.

Hello,
I buy 6 antminer L3 and the PSU APW3++,July Batch × 6 link (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679 ) i see right now only: Interface Type: 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
Is it sufficient for one L3 antiminer how much PCI-E connetctos need for one antminer L3, Where is the difference between them APW3++ for L3+,September batch link: (https://shop.bitmain.com/productDetail.htm?pid=000201706271739309427J1lvI3X0667)

and

PSU APW3++,July Batch (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679 )

Yes, with APW3++ (July batch) you can run 1 x L3+ and with that APW3++ (September batch) you can run up to 2 x L3+ (but need 220V for 2 L3+). 1 L3+ needs 9 PCI-E connectors.

but the PSU APW3++,July Batch Have only 5 pairs of 6 pin PCI-E connectors What can i do ?Should I order supplements?

APW3++ have 5 pairs of 6 pin PCI-E connectors (10 connectors) and L3+ needs only 9 connectors.

lavdimi

newbie

Activity: 2

Merit: 0

Quote from: SplinterZalinsk on July 03, 2017, 10:08:02 AM

Quote from: lavdimi on July 03, 2017, 09:58:45 AM

Quote from: SplinterZalinsk on June 22, 2017, 03:58:26 PM

The APW3++ for S9 (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679) is 100% identical to The APW3++ for L3+ (https://shop.bitmain.com/productDetail.htm?pid=000201706190812304704Fch048r0646), except the interface type. It's '5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)' in APW3++ for S9 and it's '9 pairs of 6 pin PCI-E connectors (i.e. 18 connectors)' in APW3++ for L3+. So, if you will run only 1 L3+/APW3++ in a 110v like me (you can't run more than 1 L3+/APW3++ in 110v anyway)... you can get the APW3++ for S9 (July batch still available) to run your L3+ and it will be 100% identical to using APW3++ for L3+! Plus it's $10 cheaper each that savings $40 in my case.

Hello,
I buy 6 antminer L3 and the PSU APW3++,July Batch × 6 link (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679 ) i see right now only: Interface Type: 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
Is it sufficient for one L3 antiminer how much PCI-E connetctos need for one antminer L3, Where is the difference between them APW3++ for L3+,September batch link: (https://shop.bitmain.com/productDetail.htm?pid=000201706271739309427J1lvI3X0667)

and

PSU APW3++,July Batch (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679 )

Yes, with APW3++ (July batch) you can run 1 x L3+ and with that APW3++ (September batch) you can run up to 2 x L3+ (but need 220V for 2 L3+). 1 L3+ needs 9 PCI-E connectors.

but the PSU APW3++,July Batch Have only 5 pairs of 6 pin PCI-E connectors What can i do ?Should I order supplements?

SplinterZalinsk

full member

Activity: 227

Merit: 100

Quote from: lavdimi on July 03, 2017, 09:58:45 AM

Quote from: SplinterZalinsk on June 22, 2017, 03:58:26 PM

The APW3++ for S9 (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679) is 100% identical to The APW3++ for L3+ (https://shop.bitmain.com/productDetail.htm?pid=000201706190812304704Fch048r0646), except the interface type. It's '5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)' in APW3++ for S9 and it's '9 pairs of 6 pin PCI-E connectors (i.e. 18 connectors)' in APW3++ for L3+. So, if you will run only 1 L3+/APW3++ in a 110v like me (you can't run more than 1 L3+/APW3++ in 110v anyway)... you can get the APW3++ for S9 (July batch still available) to run your L3+ and it will be 100% identical to using APW3++ for L3+! Plus it's $10 cheaper each that savings $40 in my case.

Hello,
I buy 6 antminer L3 and the PSU APW3++,July Batch × 6 link (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679 ) i see right now only: Interface Type: 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
Is it sufficient for one L3 antiminer how much PCI-E connetctos need for one antminer L3, Where is the difference between them APW3++ for L3+,September batch link: (https://shop.bitmain.com/productDetail.htm?pid=000201706271739309427J1lvI3X0667)

and

PSU APW3++,July Batch (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679 )

Yes, with APW3++ (July batch) you can run 1 x L3+ and with that APW3++ (September batch) you can run up to 2 x L3+ (but need 220V for 2 L3+). 1 L3+ needs 9 PCI-E connectors.

lavdimi

newbie

Activity: 2

Merit: 0

Quote from: SplinterZalinsk on June 22, 2017, 03:58:26 PM

The APW3++ for S9 (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679) is 100% identical to The APW3++ for L3+ (https://shop.bitmain.com/productDetail.htm?pid=000201706190812304704Fch048r0646), except the interface type. It's '5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)' in APW3++ for S9 and it's '9 pairs of 6 pin PCI-E connectors (i.e. 18 connectors)' in APW3++ for L3+. So, if you will run only 1 L3+/APW3++ in a 110v like me (you can't run more than 1 L3+/APW3++ in 110v anyway)... you can get the APW3++ for S9 (July batch still available) to run your L3+ and it will be 100% identical to using APW3++ for L3+! Plus it's $10 cheaper each that savings $40 in my case.

Hello,
I buy 6 antminer L3 and the PSU APW3++,July Batch × 6 link (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679 ) i see right now only: Interface Type: 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
Is it sufficient for one L3 antiminer how much PCI-E connetctos need for one antminer L3, Where is the difference between them APW3++ for L3+,September batch link: (https://shop.bitmain.com/productDetail.htm?pid=000201706271739309427J1lvI3X0667)

and

PSU APW3++,July Batch (https://shop.bitmain.com/productDetail.htm?pid=000201706220552393488UOm1xDH0679 )

Ryancope123

sr. member

Activity: 277

Merit: 250

Quote from: Ryancope123 on June 29, 2017, 01:53:33 AM

Quote from: Albortz on June 28, 2017, 04:37:46 AM

Do you guys have any reply from Bitmain Support lately?

I ordered some L3+ from July Batch with PSU (shipping 10 days after payment) and I have not received the PSU yet. If they send it together fair enough, but a day after I bought the PSU was "sold out" and now the new one arrived. I am not sure What to think after it clearly stated shipping within 10 days....

I contacted Bitmain 2 times in the last 10 days and I have not received ANY reply... Huh

Does anyone have the same problems?

I am exactly the same !!

Contacted bitmain and the guy didn't understand what i was actually saying to him, the fact the PSU should have been here like 2 months ago....

i just looked my oder date up April 5th.. 3 months exactly and no PSU yet still... or L3+

Micky25

legendary

Activity: 974

Merit: 1000

Quote from: Searing on July 02, 2017, 06:47:11 AM

on the other hand...perhaps..just perhaps...I shoulda saved the like Paid Out 12490.662295630000 LTC from www.litecoinpool.org it shows me from accounts that at todays LTC rate of $37.70 is $470,897.97 usd...ouch.......ouch....ouch......this is all the hash I've made accumulating LTC since Nov 8th 2014 with my first knc Titan.

well played Sir, rock on Cool

crypticj

sr. member

Activity: 873

Merit: 268

Quote from: Icon on July 02, 2017, 11:27:43 PM

you can, go to your hashnest wallet and hit the deposit button.. simple

Icon

Yep its confirmed... no more deposit allowed.

Icon

hero member

Activity: 821

Merit: 503

you can, go to your hashnest wallet and hit the deposit button.. simple

Icon

crypticj

sr. member

Activity: 873

Merit: 268

Quote from: Icon on July 02, 2017, 09:20:53 PM

"Due to regulatory concerns beyond our control we cannot accept deposits from the State of New York."

Just a little FYI: Seems Bitmain/Hashnest is now blocking ALL USA from making any kind of deposits to your btc/ltc wallets in accordance with the New York Bit license.. Ya they just band all North America..

Smooth

Icon

Can any one else please confirm that?

Icon

hero member

Activity: 821

Merit: 503

"Due to regulatory concerns beyond our control we cannot accept deposits from the State of New York."

Just a little FYI: Seems Bitmain/Hashnest is now blocking ALL USA from making any kind of deposits to your btc/ltc wallets in accordance with the New York Bit license.. Ya they just band all North America..

Smooth

Icon

Topic: Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner - page 176. (Read 284882 times)