Launching the Antminer L3+, World's Most Powerful and Efficient Litecoin Miner - page 180.

Quote from: SplinterZalinsk on June 23, 2017, 06:46:24 PM

Quote from: SplinterZalinsk on June 23, 2017, 06:12:56 PM

Quote from: sunny163 on June 24, 2017, 10:51:46 PM

This kit by Gekkoscience, HP DPS-1200 FBA server power supply with breakout board and 10x pci-e cables will do the job nicely.

See the "DPS1200 PSU Kit".
https://bitcointalksearch.org/topic/fs-gs-server-psus-boards-kits-stickminers-gpu-riser-power-made-in-usa-940317

Yes, the problem is that the last reply from them was months ago.

What do you mean? Sidehack is active and has recent activity here at the forum.

I was referring only about that specific thread

Well that doesn't mean anything. He still has the stuff for sale.

I sent a msg to him yesterday and got no reply until now... I'd be pissed if he delayed responding to my messages after I sent the money. Better get it from somewhere else. Thank you any way, friend!

That's mighty selfish of you, don't you think? sidehack has a life of his own, he's busy guy, and there is a pretty good chance that he is located in a different time-zone than you. You are not his only customer, and you are no more important than any of the other customers he has, perhaps even less so since you haven't purchased from him yet. Try reading the first message of the purchase thread and all the details are usually presented.

I've dealt with sidehack, both via message threads and PMs on this forum. I have purchased a modified S7-LN miner through him, and everything was as advertised.

Sorry if looked like this... I bet that getting that PSU for L3+ with them is a good option as well. I'll also do business with them soon... Thanks for the collaboration guys!

kodokbuduk

full member

Activity: 294

Merit: 100

one of my L3+ is not detecting one hashboard, tried to swap signal cables to another port without success.. i can see the red LED is on and the heatsink is hot..some how the hashbaord is not showing on L3+ miner status, damitttt have to send to bitmain..has any one experience this?

crypticj

sr. member

Activity: 873

Merit: 268

Quote from: wheelz1200 on June 24, 2017, 07:41:22 AM

Quote from: usenet on June 24, 2017, 07:28:34 AM

Quote from: wheelz1200 on June 24, 2017, 07:41:22 AM

Guys what you think about the price for L3+ on hashnest for next restock ?

I would not expect a low price.
Bitmain sells L3+ for 46.9 LTC in China. For us price is 41 LTC.
The next L3+ in Hashnest can cost even up to around $5600.

That price is crazy. No way would they sell enough at that price.

yes because $5600 is way too high and ROI i think far from this point

Nope $5600 is easy for them to sell... the other way they can sell it is currently 1 MH/s on Hashnest Market is going for 0.3080 LTC so

so 1 L3+ will be 504 x .3080 = 155 LTC x $43 per LTC = $6675

so if Hashnest is smarter than slowly sell L3+ on the Market Average Daily Volume is 24000 Mh/s or about 50 L3+ day they can keep mining for themselves until they can sell all there hash power on open market.

sunny163

member

Activity: 126

Merit: 10

Quote from: usenet on June 24, 2017, 07:28:34 AM

Quote from: SplinterZalinsk on June 24, 2017, 09:40:34 AM

Guys what you think about the price for L3+ on hashnest for next restock ?

I would not expect a low price.
Bitmain sells L3+ for 46.9 LTC in China. For us price is 41 LTC.
The next L3+ in Hashnest can cost even up to around $5600.

That price is crazy. No way would they sell enough at that price.

yes because $5600 is way too high and ROI i think far from this point

ZedZedNova

sr. member

Activity: 475

Merit: 265

Ooh La La, C'est Zoom!

Quote from: SplinterZalinsk on June 23, 2017, 06:46:24 PM

Quote from: SplinterZalinsk on June 23, 2017, 06:12:56 PM

Quote from: SplinterZalinsk on June 24, 2017, 09:40:34 AM

This kit by Gekkoscience, HP DPS-1200 FBA server power supply with breakout board and 10x pci-e cables will do the job nicely.

See the "DPS1200 PSU Kit".
https://bitcointalksearch.org/topic/fs-gs-server-psus-boards-kits-stickminers-gpu-riser-power-made-in-usa-940317

Yes, the problem is that the last reply from them was months ago.

What do you mean? Sidehack is active and has recent activity here at the forum.

I was referring only about that specific thread

Well that doesn't mean anything. He still has the stuff for sale.

I sent a msg to him yesterday and got no reply until now... I'd be pissed if he delayed responding to my messages after I sent the money. Better get it from somewhere else. Thank you any way, friend!

That's mighty selfish of you, don't you think? sidehack has a life of his own, he's busy guy, and there is a pretty good chance that he is located in a different time-zone than you. You are not his only customer, and you are no more important than any of the other customers he has, perhaps even less so since you haven't purchased from him yet. Try reading the first message of the purchase thread and all the details are usually presented.

I've dealt with sidehack, both via message threads and PMs on this forum. I have purchased a modified S7-LN miner through him, and everything was as advertised.

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Quote from: SplinterZalinsk on June 23, 2017, 06:46:24 PM

Quote from: SplinterZalinsk on June 23, 2017, 06:12:56 PM

This kit by Gekkoscience, HP DPS-1200 FBA server power supply with breakout board and 10x pci-e cables will do the job nicely.

See the "DPS1200 PSU Kit".
https://bitcointalksearch.org/topic/fs-gs-server-psus-boards-kits-stickminers-gpu-riser-power-made-in-usa-940317

Yes, the problem is that the last reply from them was months ago.

What do you mean? Sidehack is active and has recent activity here at the forum.

I was referring only about that specific thread

Well that doesn't mean anything. He still has the stuff for sale.

I sent a msg to him yesterday and got no reply until now... I'd be pissed if he delayed responding to my messages after I sent the money. Better get it from somewhere else. Thank you any way, friend!

He is a busy manufacturer and most likely wants to have some free time from work in weekends just like most of us.
You are being impatient.

SplinterZalinsk

full member

Activity: 227

Merit: 100

Quote from: SplinterZalinsk on June 23, 2017, 06:46:24 PM

Quote from: SplinterZalinsk on June 23, 2017, 06:12:56 PM

Quote from: usenet on June 24, 2017, 07:28:34 AM

This kit by Gekkoscience, HP DPS-1200 FBA server power supply with breakout board and 10x pci-e cables will do the job nicely.

See the "DPS1200 PSU Kit".
https://bitcointalksearch.org/topic/fs-gs-server-psus-boards-kits-stickminers-gpu-riser-power-made-in-usa-940317

Yes, the problem is that the last reply from them was months ago.

What do you mean? Sidehack is active and has recent activity here at the forum.

I was referring only about that specific thread

Well that doesn't mean anything. He still has the stuff for sale.

I sent a msg to him yesterday and got no reply until now... I'd be pissed if he delayed responding to my messages after I sent the money. Better get it from somewhere else. Thank you any way, friend!

wheelz1200

legendary

Activity: 3752

Merit: 1415

Guys what you think about the price for L3+ on hashnest for next restock ?

I would not expect a low price.
Bitmain sells L3+ for 46.9 LTC in China. For us price is 41 LTC.
The next L3+ in Hashnest can cost even up to around $5600.

That price is crazy. No way would they sell enough at that price.

usenet

full member

Activity: 133

Merit: 100

Quote from: MadMex on June 23, 2017, 11:00:52 PM

Guys what you think about the price for L3+ on hashnest for next restock ?

I would not expect a low price.
Bitmain sells L3+ for 46.9 LTC in China. For us price is 41 LTC.
The next L3+ in Hashnest can cost even up to around $5600.

wheelz1200

legendary

Activity: 3752

Merit: 1415

Quote from: suchmoon on June 23, 2017, 08:58:08 PM

Quote from: SplinterZalinsk on June 23, 2017, 06:46:24 PM

I have ordered 2 l3+ (for the September batch) along with 2 apw++ for the July S9 batch, and I was wondering what else I need to know/have before I am ready to begin mining. I am planning on setting up the machines in their own room of my home and I couldn't find any information about how many can be hooked up in one room or how many on the same circiut. Also is there anything I need to worry about regarding the placement of the miners or the powering of the miners or the profability of them in September. I am very new to mining and any helpful responses would be greatly appreciated.

(also it says I need a power cable for each APW++ and I was wondering what I need for that too)

Assuming you're in the US, you'll likely need two separate circuits. One L3+ will be pulling 8-9 amps so you can only run one on a typical 15A circuit, MAYBE two on a 20A but not recommended (you should not exceed 80% of breaker rating).

I don't think anybody can help you with profitability. Most likely the difficulty will increase and profitability will decrease by then, but nobody can tell how much.

You'll need a power cable like this (again, assuming you're in the US/Canada/etc): https://www.amazon.com/Tripp-Lite-Heavy-Duty-IEC-320-C13-P007-006/dp/B0027JRMD0

Edit: you'll also need a wired internet connection, e.g. two Ethernet cables from your router.

Thanks for the detailed answer, if I were to get a 240v circuit how many miners would I be able to have on it? And what kind of cooling would I need for 2 L3+'s?

Go with a 20 amp 240v circuit for 2 L3s, it will give you enough room to add another if you choose. As far as cooling that is all dependant on miner placement in you house/garage/etc. As well as your specific climate where you live

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Quote from: SplinterZalinsk on June 23, 2017, 06:12:56 PM

This kit by Gekkoscience, HP DPS-1200 FBA server power supply with breakout board and 10x pci-e cables will do the job nicely.

See the "DPS1200 PSU Kit".
https://bitcointalksearch.org/topic/fs-gs-server-psus-boards-kits-stickminers-gpu-riser-power-made-in-usa-940317

Yes, the problem is that the last reply from them was months ago.

What do you mean? Sidehack is active and has recent activity here at the forum.

I was referring only about that specific thread

Well that doesn't mean anything. He still has the stuff for sale.

sqnkee

newbie

Activity: 54

Merit: 0

Quote from: MadMex on June 23, 2017, 11:00:52 PM

I have ordered 2 l3+ (for the September batch) along with 2 apw++ for the July S9 batch, and I was wondering what else I need to know/have before I am ready to begin mining. I am planning on setting up the machines in their own room of my home and I couldn't find any information about how many can be hooked up in one room or how many on the same circiut. Also is there anything I need to worry about regarding the placement of the miners or the powering of the miners or the profability of them in September. I am very new to mining and any helpful responses would be greatly appreciated.

(also it says I need a power cable for each APW++ and I was wondering what I need for that too)

Only few things

1. Miners are loud and they give off a lot of heat. So in a home environment basemant or the garage are the best room.
2. One L3+ takes less than 4 ampers on 230v line and less than 8 for 110v. Check FUSE, how many ampers it got. Also wires. long term load of 1,5mm wire is maximum 15 ampers, 2,5mm - 20 ampers.

suchmoon

legendary

Activity: 3654

Merit: 8909

https://bpip.org

Thanks for the detailed answer, if I were to get a 240v circuit how many miners would I be able to have on it? And what kind of cooling would I need for 2 L3+'s?

One miner would need ~4 amps on 240V, so if you get a 20 amp 240V circuit - 3 miners at least, maybe 4.

Cooling depends on your climate mostly. Don't waste money on A/C unless you're somewhere like Arizona. Just venting the room (window fan perhaps?) may be sufficient.

MadMex

newbie

Activity: 18

Merit: 0

Quote from: suchmoon on June 23, 2017, 08:58:08 PM

I have ordered 2 l3+ (for the September batch) along with 2 apw++ for the July S9 batch, and I was wondering what else I need to know/have before I am ready to begin mining. I am planning on setting up the machines in their own room of my home and I couldn't find any information about how many can be hooked up in one room or how many on the same circiut. Also is there anything I need to worry about regarding the placement of the miners or the powering of the miners or the profability of them in September. I am very new to mining and any helpful responses would be greatly appreciated.

(also it says I need a power cable for each APW++ and I was wondering what I need for that too)

Assuming you're in the US, you'll likely need two separate circuits. One L3+ will be pulling 8-9 amps so you can only run one on a typical 15A circuit, MAYBE two on a 20A but not recommended (you should not exceed 80% of breaker rating).

I don't think anybody can help you with profitability. Most likely the difficulty will increase and profitability will decrease by then, but nobody can tell how much.

You'll need a power cable like this (again, assuming you're in the US/Canada/etc): https://www.amazon.com/Tripp-Lite-Heavy-Duty-IEC-320-C13-P007-006/dp/B0027JRMD0

Edit: you'll also need a wired internet connection, e.g. two Ethernet cables from your router.

Thanks for the detailed answer, if I were to get a 240v circuit how many miners would I be able to have on it? And what kind of cooling would I need for 2 L3+'s?

sunny163

member

Activity: 126

Merit: 10

Guys what you think about the price for L3+ on hashnest for next restock ?

suchmoon

legendary

Activity: 3654

Merit: 8909

https://bpip.org