Topic: LBRY.IO - DICUSSION THREAD - page 173. (Read 362584 times)

-W 64 is not low
add at the end of the line -g 3   or -g 5
then make test with different -I 17 -I 18 and higher -I 20 to -I 22
for both -g
then You will have about 100 mH 

atm i have this same windows (beter then before but still sucks), i guess this is beter info to fix this new problem? xd

i copied the whole kernel folder to that temp folder and it start mining ( slow so i need to fix that, but it started omfg.... what a circus )

New problem:
gpu driver crash and dont recover so i need to forced shut down the computer the whole time when starting the .bat
What is installed about the GPU?
Newest catalyst
AMD SDK (newest)

i tried the ethereum miner, works like a charm (faster then before the reset xd )

Can somebody show me an .bat for an R9 290 oc tri-x? Or just the R9 290?

Problem found:
u always use MSI afterburner for undervolt and overclocking.

I installed again but someting went wrong, he overclock the memory with 700Mhz!!! also the core get overclocked by 300Mhz. ofcourse that driver crash.

Mining speed now:
84Mh/s with the R9 290 OC TRI-X, low overclock, -1 undervolt


Edit, driver keep crashing, downgrade to catalyst 15.12 now
Edit: with 15.12 keep crashing after few seconds. Get a few dhares and crash. even with clean .bat and also with only I 12 it crash

Edit: test ethereum miner, he just mine without crashes

Edit (again..): when on I 12 it keep running now, but with just 12Mh/s.. When i use G (in the miner) and change the I to 16 is crash directly.

Good my .bat now:
sgminer.exe --kernel lbry -o stratum+tcp://lbry.suprnova.cc:6256 -u minerjoen.1 -p x -I 16 -w 64
pause
Speed: ~50Mh/s
Runtime: approx 7 minutes, stable.
Could be faster, but when i change the Intensivity to 18 he crash.

So solution when sgminer.exe dont start on Windows 10:
Check antivirus
Not the antivirus?
Reset Windows 10 (just by using the menu / settings inside windows 10 and recover it), there is something wrong in Windows 10 why he dont start the sgminer.exe. I also check the regedit but that was all good.

After reset Windows 10 the miner will start
Driver version? Doesn't matter, he will work on 16.x but also on 15.x (no difference in speed)
Install AMD SDK

u can use my .bat file, change ur pool/workername/pass

Believe me, i tested and checked ''everything'' before i reset Windows 10.

Ofcourse the 50Mh/s i get now, is not optimal, it could be faster. I will post any changes i made so the speed get faster. Also we need updates for the sgminer because its simply not optimized. My card should get easy to the I 18 or higher, at this moment i dont get it higher then I 16.

What do you guys think about that -w 64? 64 is low, maybe beter without -w or change the 64 to 256?, check: i deleted the -w 64 total, speed / shares the same so that -w looks useless

I hope the people with the same issues i had can go further now. Remember, the solution is never to throw your computer outside the window

Edit:
Dont know why, i used inside the cmd / miner: G -> I on 18. And it runs without crash on I 18, i add/changed the .bat file to -w 256
Speed now: ~71 Mh/s
System (windows) stable, no artifacts, no delays. Just good now.
Little undervolt, little overclock on the core clock, underclock on the memory clock (core +100, memory -50) by using MSI afterburner.

Atm spreading 3 cards to 3 pools so fully on this coin, i see the price is climbing again!

It's standard with new coins on exchanges, people dump and after that the price get higher but slowly. Its healty, now it's up to the community and dev team to succes this coin. Thanks to the pool operators, thanks to ocminer for reply to me, thanks to everybody what tried to help me (sorry, i fixed it by myself )

Love and peace to all
Minerjoen

Good luck im sure you can today mine 

Already tested with and without admin.
Tested many .bat, created a lot own .bat

Edit:
windows reset is completed, i start the .bat (without any drivers installed) and i get a other message about the gpu settings (logical, drivers not installed) looks beter now, i am installing drivers and amd sdk now. keep u posted.

don't run as administrator, (or marked to run as administrator), if I run my mining .bat as administrator I have same problem like you. You copy file .bat from another computer or is created by you? If is downloaded or copied make a new .txt file put everiting inside and then rename to .bat

Hey ocminer!

Windows 10 pro 64 bit official
Miner is also 64 bit for what i can see

Atm windows 10 is busy with a reset. But i cant believe its the system, ofc i wont hurt to do that reset. Almost ready

It could be you are trying to run a 64 bit executable on a 32 bit system which won't work

Indeed thanks all. Hope we will get it work, i am not the only one with this same issue.

Nice community work everyone keep helping everyone so we can strengthen the network. Especially minerjoen I have looked at the problem but I'm not too sure what is the problem with it.



Thanks for the help everyone

Yes ofcourse.

I'm mining coins for years now.. i know how to start a miner.
Only this sgminer.exe is not good

Is the bat in the same folder as the sgminer.exe?

I already tried as admin. Path is correct, tested differens paths also without path in the .bat
Tries all about thar

his problem is 'sgminer.exe' is not recognized as an internal or external command when is run from bat

Vote for LBRY Credits to be added to cryptofolio.info:
https://cryptofolio.info/welcome/vote
 

minerjoen,
try adding --gpu-platform 1:
sgminer.exe --algorithm=lbry -o stratum+tcp://your_pool -u user.worker -p pass -I 22 --gpu-threads 8 --gpu-platform 1
 

If you run your bat as administrator (or is marked to run as administrator) then commands inside bat is not point in your current folder.

same

Try one more thing
make worker YOURWORKER.1 with password x and try

I did, i even uninstalled the antivirus completely, no changes

i also downloaded everything again without antivirus, no changes.

tried
not helping (same)