When not using the complete path and using pause it just say:
'sgminer.exe' is not recognized as an internal or external command,
operable program or batch file.
absolutely the same massage I received when for the first time started the bat file
it was because my Kasperski deleted the sgminer.exe
I added the folder in Kasperski exceptions
place another fresh copy of the miner in the folder - and it was OK
Topic: LBRY.IO - DICUSSION THREAD - page 174. (Read 362584 times)
you can see what it says if you write on the next line in your bat file pause
it must pause and this will allow to read the massages
I continue to think
it must pause and this will allow to read the massages
I continue to think
No it dont, when i use pause i get 2 options:
when using the complete path it show me the path and i can press enter to close window
When not using the complete path and using pause it just say:
'sgminer.exe' is not recognized as an internal or external command,
operable program or batch file.
This should mean that sgminer.exe is not a real .exe file or its corrupt (can happen when the antivirus focked it, but that's not the case)
when i try to open the sgminer.exe by using the CMD commands, it also just flash that's it.
I'm 100% that sgminer.exe is not 100% oké. It's 100% not an antivirus, its 100% not my drivers.. All the directions goes to sgminer.exe
And again, remember: all miners are working here, x11, scrypt, quark, x13, ethereum, sha, everything is working in a few seconds without any problems... Only lbry miner is not working.
If i wont get that crazy miner work in 1 hour from now on i leave this coin behind, waste of time.
is something wrong with your bat file or system settings, practicaly your setup want to launch sgminer.exe from c:\windows\system32 (default path when start cmd), until find what is wrong copy sgminer.exe and kernel folder to c:\windows\system32 and then try aganin.
you can see what it says if you write on the next line in your bat file pause
it must pause and this will allow to read the massages
I continue to think
it must pause and this will allow to read the massages
I continue to think
No it dont, when i use pause i get 2 options:
when using the complete path it show me the path and i can press enter to close window
When not using the complete path and using pause it just say:
'sgminer.exe' is not recognized as an internal or external command,
operable program or batch file.
This should mean that sgminer.exe is not a real .exe file or its corrupt (can happen when the antivirus focked it, but that's not the case)
when i try to open the sgminer.exe by using the CMD commands, it also just flash that's it.
I'm 100% that sgminer.exe is not 100% oké. It's 100% not an antivirus, its 100% not my drivers.. All the directions goes to sgminer.exe
And again, remember: all miners are working here, x11, scrypt, quark, x13, ethereum, sha, everything is working in a few seconds without any problems... Only lbry miner is not working.
If i wont get that crazy miner work in 1 hour from now on i leave this coin behind, waste of time.
you can see what it says if you write on the next line in your bat file pause
it must pause and this will allow to read the massages
I continue to think
it must pause and this will allow to read the massages
I continue to think
I am using the same but without the full path and threads and this below
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
You must check your antivirus and firewall - usually they stop the miner
configure their exceptions
and if this does not help - maybe you have problem connection with the pool - then try another pool - there are 2 more pools for LBRY mining
try coinmine for example
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
You must check your antivirus and firewall - usually they stop the miner
configure their exceptions
and if this does not help - maybe you have problem connection with the pool - then try another pool - there are 2 more pools for LBRY mining
try coinmine for example
It's not the antivirus (on the test system i completly deleted the antivirus so no av was running, still not work)
It's not the pool ( i dont get connection issues, i tried 2 or 3 other pools )
It is the sgminer.exe, it dont even start (well for 1 second and it close automatic)
The issue is also, he dont leave a log file, i can not see the total error. And the flash goes to fast to read what is say.
What is also bad,,, i contacted the dev, he was online a few times but dont even answer my PM.
Next thing what is bad: the coin is gettin dumped massive,
I am using the same but without the full path and threads and this below
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
You must check your antivirus and firewall - usually they stop the miner
configure their exceptions
and if this does not help - maybe you have problem connection with the pool - then try another pool - there are 2 more pools for LBRY mining
try coinmine for example
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
You must check your antivirus and firewall - usually they stop the miner
configure their exceptions
and if this does not help - maybe you have problem connection with the pool - then try another pool - there are 2 more pools for LBRY mining
try coinmine for example
do you have the lbry.cl file int the same folder?
I'm getting this error:
[21:05:09] Started sgminer 5.4.0-nicehash
[21:05:09] * using Jansson 2.7
[21:05:09] Probing for an alive pool
[21:05:09] lbry.suprnova.cc difficulty changed to 32
[21:05:11] Startup GPU initialization... Using settings from pool lbry.suprnova.cc.
[21:05:11] Startup Pool No = 0
[21:05:11] Building binary lbryTongagw256l4.bin
[21:05:11] Unable to open lbry.cl for reading!
[21:05:11] Failed to init GPU thread 0, disabling device 0
[21:05:11] Restarting the GPU from the menu will not fix this.
[21:05:11] Re-check your configuration and try restarting.
Specs:
Windows 10 x64
R9 380x
Catalyst 15.12
sgminer 5.4.0-nicehash
What could be wrong? :?
[21:05:09] Started sgminer 5.4.0-nicehash
[21:05:09] * using Jansson 2.7
[21:05:09] Probing for an alive pool
[21:05:09] lbry.suprnova.cc difficulty changed to 32
[21:05:11] Startup GPU initialization... Using settings from pool lbry.suprnova.cc.
[21:05:11] Startup Pool No = 0
[21:05:11] Building binary lbryTongagw256l4.bin
[21:05:11] Unable to open lbry.cl for reading!
[21:05:11] Failed to init GPU thread 0, disabling device 0
[21:05:11] Restarting the GPU from the menu will not fix this.
[21:05:11] Re-check your configuration and try restarting.
Specs:
Windows 10 x64
R9 380x
Catalyst 15.12
sgminer 5.4.0-nicehash
What could be wrong? :?
No, where to get lbry.cl and what other files do i need?
the lbry.cl is in the kernel folder, copy that and place next to the sgminer.exe
Pff i wish i had that issue :S
Do you have an link to the kernel folder?
do you have the lbry.cl file int the same folder?
I'm getting this error:
[21:05:09] Started sgminer 5.4.0-nicehash
[21:05:09] * using Jansson 2.7
[21:05:09] Probing for an alive pool
[21:05:09] lbry.suprnova.cc difficulty changed to 32
[21:05:11] Startup GPU initialization... Using settings from pool lbry.suprnova.cc.
[21:05:11] Startup Pool No = 0
[21:05:11] Building binary lbryTongagw256l4.bin
[21:05:11] Unable to open lbry.cl for reading!
[21:05:11] Failed to init GPU thread 0, disabling device 0
[21:05:11] Restarting the GPU from the menu will not fix this.
[21:05:11] Re-check your configuration and try restarting.
Specs:
Windows 10 x64
R9 380x
Catalyst 15.12
sgminer 5.4.0-nicehash
What could be wrong? :?
[21:05:09] Started sgminer 5.4.0-nicehash
[21:05:09] * using Jansson 2.7
[21:05:09] Probing for an alive pool
[21:05:09] lbry.suprnova.cc difficulty changed to 32
[21:05:11] Startup GPU initialization... Using settings from pool lbry.suprnova.cc.
[21:05:11] Startup Pool No = 0
[21:05:11] Building binary lbryTongagw256l4.bin
[21:05:11] Unable to open lbry.cl for reading!
[21:05:11] Failed to init GPU thread 0, disabling device 0
[21:05:11] Restarting the GPU from the menu will not fix this.
[21:05:11] Re-check your configuration and try restarting.
Specs:
Windows 10 x64
R9 380x
Catalyst 15.12
sgminer 5.4.0-nicehash
What could be wrong? :?
No, where to get lbry.cl and what other files do i need?
the lbry.cl is in the kernel folder, copy that and place next to the sgminer.exe
Pff i wish i had that issue :S
do you have the lbry.cl file int the same folder?
I'm getting this error:
[21:05:09] Started sgminer 5.4.0-nicehash
[21:05:09] * using Jansson 2.7
[21:05:09] Probing for an alive pool
[21:05:09] lbry.suprnova.cc difficulty changed to 32
[21:05:11] Startup GPU initialization... Using settings from pool lbry.suprnova.cc.
[21:05:11] Startup Pool No = 0
[21:05:11] Building binary lbryTongagw256l4.bin
[21:05:11] Unable to open lbry.cl for reading!
[21:05:11] Failed to init GPU thread 0, disabling device 0
[21:05:11] Restarting the GPU from the menu will not fix this.
[21:05:11] Re-check your configuration and try restarting.
Specs:
Windows 10 x64
R9 380x
Catalyst 15.12
sgminer 5.4.0-nicehash
What could be wrong? :?
[21:05:09] Started sgminer 5.4.0-nicehash
[21:05:09] * using Jansson 2.7
[21:05:09] Probing for an alive pool
[21:05:09] lbry.suprnova.cc difficulty changed to 32
[21:05:11] Startup GPU initialization... Using settings from pool lbry.suprnova.cc.
[21:05:11] Startup Pool No = 0
[21:05:11] Building binary lbryTongagw256l4.bin
[21:05:11] Unable to open lbry.cl for reading!
[21:05:11] Failed to init GPU thread 0, disabling device 0
[21:05:11] Restarting the GPU from the menu will not fix this.
[21:05:11] Re-check your configuration and try restarting.
Specs:
Windows 10 x64
R9 380x
Catalyst 15.12
sgminer 5.4.0-nicehash
What could be wrong? :?
No, where to get lbry.cl and what other files do i need?
can you show Your bat file for the windows system
what is your pool
what is your pool
i tried many bat files.
The current one:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
E:\miners\lbminer\gpu\sgminer.exe --kernel lbry -o stratum+tcp://lbry.suprnova.cc:6256 -u minerjoen.gpu -p 1 -I 19 -w 64 --gpu-threads 2
i use the complete path, i also see he start the sgminer.exe and close directly
i also tried just sgminer.exe instead of complete path
i also tried without the -I, -w, gpu threads
i also tried -kernel instead of --kernel
I tried with and without antivirus
i tried with catalyst 15.x and 16.x
Got net framwork (last version)
got amd sdk (last version)
Got windows 10 pro 64 bit full updated
i tried on ubuntu (Same shit)
All other coins works fine, also the sgminers.. i also tried to place a other sgminer to the lbry miner, not working (while the same sgminer works on other coins in a other folder)
i tried the complete zipped working folder from Lafu, the one he is using now.
Also if u look at the internet, many people got this same issue.
I mined many, many coins in the last 4-5 years.. This is the FIRST time a miner is not working (ethereum was strange to start but no problem), if i run a random x11 miner of scrypt of sha or ether, all work directly. its only this coin-miner.
can you show Your bat file for the windows system
what is your pool
what is your pool
This SGminer
http://cryptomining-blog.com/8075-cpu-and-amd-gpu-mining-for-lbry-credits-lbc-now-available/
http://cryptomining-blog.com/8075-cpu-and-amd-gpu-mining-for-lbry-credits-lbc-now-available/
i tried, sgminer.exe open and close directly. On ubuntu and on windows 10.
whats all that about joining the wave ? did anyone got into it yet (via e-mail)?
i got no problems with mining LBRY (works like a charm) - I am with Windows
atm i got 1 system with Windows 10 and 1 system with ubuntu on vmware, both not working. sgminer.exe is not 100%
Over 20 years?
i got no problems with mining LBRY (works like a charm) - I am with Windows
But it is still better than Ether
Why?i got no problems with mining ether (works like a charm), this is my 2nd day i try to mine this coin.. But if it's not possible, lbry only cost me money.
But it is still better than Ether
what is the error you are getting now? Still the missing lbry.cl?
oh no i never get that error (i wish i had that simple error haha), i get that message about the sgminer.exe
'sgminer.exe' is not recognized as an internal or external command,
operable program or batch file.
When use the complete path like u told:
E:\miners\lbminer\gpu>pause
Press any key to continue . . .
my .bat:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
"E:\miners\lbminer\gpu\sgminer.exe" --kernel lbry -o stratum+tcp://lbry.suprnova.cc:6256 -u minerjoen.gpu -p 1 -I 19 -w 64 --gpu-threads 2
pause
Without the pause function CMD just OPEN - CLOSE directly
Edit: i try to run the sgminer.exe as Windows 7 by the compatibily but nothing changed, same shit
edit: lafu was so kind to send his mining folder to me, but still the same: cmd start and close directly...
I can not give an anti virus programm the fault because i dont have any antivirus program anymore on the test system.
You have to put the path of the actual miner, don't use ours. Or open command prompt and use cd to go to your miner directory, and then execute sgminer.exe
i tried...
i can go by using the cmd to the miner folder, when using /a i can see the sgminer.exe.. when i enter sgminer.exe it just dont work (i see a 2nd cmd open and close directly).
So i tried to start the sgminer like u tell, it not work..
I'm so desperate, i installed ubuntu on VMware with wine (i'm sorry to say but what a shit operating system) , guess what? exact the same: open and close.
Anyway if u look at this:
https://bittrex.com/Market/Index?MarketName=BTC-LBC
i think its not worth it anymore, coin get dumped already?
Jump to: