LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out! - page 100.

bearsworth

sr. member

Activity: 392

Merit: 250

Quote from: Andareed on February 20, 2014, 08:51:48 PM

Quote from: FreeJack2k2 on February 20, 2014, 08:06:59 PM

Quote from: Beastlymac on February 20, 2014, 07:46:45 PM

Quote from: BitcoinPappi on February 20, 2014, 07:41:06 PM

Quote from: Beastlymac on February 20, 2014, 07:23:05 PM

Quote from: MZD on February 20, 2014, 07:07:17 PM

Quote from: Beastlymac on February 20, 2014, 07:00:20 PM

The controller firmware can only be installed by jack he isn't making it available for people to use on their own.

In regards to a support thread I am working on one it is linked in my signature.

What the hell?!?!

What if we need to upgrade it? Is it possible to update at home?

From my understanding no. But I am not Jack you will have to ask him directly.

You mentioned before that the units can be over clocked without the new firmware correct ? Can you post a guide how to over clock the units to get the 500 kh/s shown by jack using the new firmware ?

My unit was shipped so should arrive shortly . Would like to get all my instructions in place

Running via cpuminer on the computer you just put the frequency at 900

So it's not possible to do this via the controller that ships with it? Wondering how he had 10 of these showing that hashrate, unless he was running 10 different instances of cpuminer on a host PC? Can it be clocked that high using the controller?

Can someone post a picture of the controller? Is it the one posted earlier with an SD card? Someone else mentioned that it runs linux and SSH. If so, it would be trivial to get cgminer working in a screen session.

I cant seem to find controller did anyone else have this problem?

MZD

full member

Activity: 189

Merit: 100

Quote from: bearsworth on February 20, 2014, 09:37:13 PM

i am reporting back here to say I received my miners today. Thanks Jack!!! The only issue is - I can't seem to find the controllers but have the other parts.

That's a pretty big issue!

bearsworth

sr. member

Activity: 392

Merit: 250

i am reporting back here to say I received my miners today. Thanks Jack!!! The only issue is - I can't seem to find the controllers but have the other parts.

bobby35ny

member

Activity: 96

Merit: 10

Quote from: gigq on February 20, 2014, 09:11:44 PM

Quote from: OgNasty on February 20, 2014, 08:28:37 PM

I have these same colored wires. I hooked mine up to match yours in the picture and no light comes on and nothing happens. Sad

I did this on 2 separate PSUs. Is there a magic 'on' button I can't seem to find or something?

There is a 220v -> 110v black switch on the side of the unit. This got me too, no idea why they don't switch it for you before shipping to the states.

What is the make and model of the Power Supply? I need to see if it can run at 208V
-bobby

gigq

member

Activity: 93

Merit: 10

Quote from: Andareed on February 20, 2014, 08:51:48 PM

Can someone post a picture of the controller? Is it the one posted earlier with an SD card? Someone else mentioned that it runs linux and SSH. If so, it would be trivial to get cgminer working in a screen session.

Here you go though it's pretty basic. No SD card, just a power, network and usb port. The controller is listening on SSH port but no one knows the user/pass.

https://dl.dropboxusercontent.com/u/117000/scryptminer/controller.jpg

If you can't read it in the picture it says "Costumed by LIGHTNINGASIC" which I got a chuckle from.

OgNasty

donator

Activity: 4760

Merit: 4323

Leading Crypto Sports Betting & Casino Platform

Quote from: gigq on February 20, 2014, 09:11:44 PM

Quote from: OgNasty on February 20, 2014, 08:28:37 PM

I have these same colored wires. I hooked mine up to match yours in the picture and no light comes on and nothing happens. Sad

I did this on 2 separate PSUs. Is there a magic 'on' button I can't seem to find or something?

There is a 220v -> 110v black switch on the side of the unit. This got me too, no idea why they don't switch it for you before shipping to the states.

Thanks for that. I didn't realize it was a switch.

gigq

member

Activity: 93

Merit: 10

Quote from: OgNasty on February 20, 2014, 08:28:37 PM

I have these same colored wires. I hooked mine up to match yours in the picture and no light comes on and nothing happens. Sad

I did this on 2 separate PSUs. Is there a magic 'on' button I can't seem to find or something?

There is a 220v -> 110v black switch on the side of the unit. This got me too, no idea why they don't switch it for you before shipping to the states.

Beastlymac

hero member

Activity: 630

Merit: 501

Miner Setup And Reviews. WASP Rep.

Quote from: FreeJack2k2 on February 20, 2014, 08:06:59 PM

Quote from: Beastlymac on February 20, 2014, 07:46:45 PM

Quote from: BitcoinPappi on February 20, 2014, 07:41:06 PM

Quote from: Beastlymac on February 20, 2014, 07:23:05 PM

Quote from: MZD on February 20, 2014, 07:07:17 PM

Quote from: Beastlymac on February 20, 2014, 07:00:20 PM

The controller firmware can only be installed by jack he isn't making it available for people to use on their own.

In regards to a support thread I am working on one it is linked in my signature.

What the hell?!?!

What if we need to upgrade it? Is it possible to update at home?

From my understanding no. But I am not Jack you will have to ask him directly.

You mentioned before that the units can be over clocked without the new firmware correct ? Can you post a guide how to over clock the units to get the 500 kh/s shown by jack using the new firmware ?

My unit was shipped so should arrive shortly . Would like to get all my instructions in place

Running via cpuminer on the computer you just put the frequency at 900

So it's not possible to do this via the controller that ships with it? Wondering how he had 10 of these showing that hashrate, unless he was running 10 different instances of cpuminer on a host PC? Can it be clocked that high using the controller?

The controller allows you to choose a frequency up to 900 also.

MZD

full member

Activity: 189

Merit: 100

More voltage is required I'm sure for the these higher clock speeds. Hell some of them were showing 800. I don't mind adding more juice. Wink

gigq

member

Activity: 93

Merit: 10

Quote from: FreeJack2k2 on February 20, 2014, 08:06:59 PM

So it's not possible to do this via the controller that ships with it? Wondering how he had 10 of these showing that hashrate, unless he was running 10 different instances of cpuminer on a host PC? Can it be clocked that high using the controller?

There is a dropdown where you select the hash rate, from 600 to 900. This came with the bundled controller.

https://dl.dropboxusercontent.com/u/117000/scryptminer/overclock.png

I'm not sure how to go up to 500 Kh/s, I'm almost wondering if that was a temporary thing or if that was sustained for the user that posted screenshots. My max is around 3600 Kh/s which I can get on both my units at 850 MHz. If I set to 900 MHz it goes slower (around 2800 Kh/s) and if I leave it at 600 MHz it is well below the advertised rate (2000 Kh/s or so).

https://dl.dropboxusercontent.com/u/117000/scryptminer/hash1.png

https://dl.dropboxusercontent.com/u/117000/scryptminer/hash2.png

Andareed

member

Activity: 84

Merit: 14

Quote from: FreeJack2k2 on February 20, 2014, 08:06:59 PM

Quote from: Beastlymac on February 20, 2014, 07:46:45 PM

Quote from: BitcoinPappi on February 20, 2014, 07:41:06 PM

Quote from: Beastlymac on February 20, 2014, 07:23:05 PM

Quote from: MZD on February 20, 2014, 07:07:17 PM

Quote from: Beastlymac on February 20, 2014, 07:00:20 PM

The controller firmware can only be installed by jack he isn't making it available for people to use on their own.

In regards to a support thread I am working on one it is linked in my signature.

What the hell?!?!

What if we need to upgrade it? Is it possible to update at home?

From my understanding no. But I am not Jack you will have to ask him directly.

You mentioned before that the units can be over clocked without the new firmware correct ? Can you post a guide how to over clock the units to get the 500 kh/s shown by jack using the new firmware ?

My unit was shipped so should arrive shortly . Would like to get all my instructions in place

Running via cpuminer on the computer you just put the frequency at 900

So it's not possible to do this via the controller that ships with it? Wondering how he had 10 of these showing that hashrate, unless he was running 10 different instances of cpuminer on a host PC? Can it be clocked that high using the controller?

Can someone post a picture of the controller? Is it the one posted earlier with an SD card? Someone else mentioned that it runs linux and SSH. If so, it would be trivial to get cgminer working in a screen session.

OgNasty

donator

Activity: 4760

Merit: 4323

Leading Crypto Sports Betting & Casino Platform

Quote from: gigq on February 19, 2014, 08:24:29 PM

So maybe others look like what's in that picture, but my cables are not labeled. For example the power cables that go to the units themselves do not have that nice red/white coloring:

https://dl.dropboxusercontent.com/u/117000/scryptminer/PSU2.JPG

Anyways if you are expecting to get one of these I would recommend having a voltmeter on hand because otherwise I would have been screwed. Now to get it mining and test the wattage.

I have these same colored wires. I hooked mine up to match yours in the picture and no light comes on and nothing happens. Sad

I did this on 2 separate PSUs. Is there a magic 'on' button I can't seem to find or something?

FreeJack2k2

sr. member

Activity: 364

Merit: 250

Quote from: Beastlymac on February 20, 2014, 07:46:45 PM

Quote from: BitcoinPappi on February 20, 2014, 07:41:06 PM

Quote from: Beastlymac on February 20, 2014, 07:23:05 PM

Quote from: MZD on February 20, 2014, 07:07:17 PM

Quote from: Beastlymac on February 20, 2014, 07:00:20 PM

The controller firmware can only be installed by jack he isn't making it available for people to use on their own.

In regards to a support thread I am working on one it is linked in my signature.

What the hell?!?!

What if we need to upgrade it? Is it possible to update at home?

From my understanding no. But I am not Jack you will have to ask him directly.

You mentioned before that the units can be over clocked without the new firmware correct ? Can you post a guide how to over clock the units to get the 500 kh/s shown by jack using the new firmware ?

My unit was shipped so should arrive shortly . Would like to get all my instructions in place

Running via cpuminer on the computer you just put the frequency at 900

So it's not possible to do this via the controller that ships with it? Wondering how he had 10 of these showing that hashrate, unless he was running 10 different instances of cpuminer on a host PC? Can it be clocked that high using the controller?

BitcoinPappi

legendary

Activity: 915

Merit: 1005

Quote from: Beastlymac on February 20, 2014, 07:46:45 PM

Quote from: BitcoinPappi on February 20, 2014, 07:41:06 PM

Quote from: Beastlymac on February 20, 2014, 07:23:05 PM

Quote from: MZD on February 20, 2014, 07:07:17 PM

Quote from: Beastlymac on February 20, 2014, 07:00:20 PM

The controller firmware can only be installed by jack he isn't making it available for people to use on their own.

In regards to a support thread I am working on one it is linked in my signature.

What the hell?!?!

What if we need to upgrade it? Is it possible to update at home?

From my understanding no. But I am not Jack you will have to ask him directly.

You mentioned before that the units can be over clocked without the new firmware correct ? Can you post a guide how to over clock the units to get the 500 kh/s shown by jack using the new firmware ?

My unit was shipped so should arrive shortly . Would like to get all my instructions in place

Running via cpuminer on the computer you just put the frequency at 900

Ok. So i guess I won't be able to use the controller. Will play with cpuminer when it comes

Beastlymac

hero member

Activity: 630

Merit: 501

Miner Setup And Reviews. WASP Rep.

Quote from: BitcoinPappi on February 20, 2014, 07:41:06 PM

Quote from: Beastlymac on February 20, 2014, 07:23:05 PM

Quote from: MZD on February 20, 2014, 07:07:17 PM

Quote from: Beastlymac on February 20, 2014, 07:00:20 PM

The controller firmware can only be installed by jack he isn't making it available for people to use on their own.

In regards to a support thread I am working on one it is linked in my signature.

What the hell?!?!

What if we need to upgrade it? Is it possible to update at home?

From my understanding no. But I am not Jack you will have to ask him directly.

You mentioned before that the units can be over clocked without the new firmware correct ? Can you post a guide how to over clock the units to get the 500 kh/s shown by jack using the new firmware ?

My unit was shipped so should arrive shortly . Would like to get all my instructions in place

Running via cpuminer on the computer you just put the frequency at 900

BitcoinPappi

legendary

Activity: 915

Merit: 1005

Quote from: Beastlymac on February 20, 2014, 07:23:05 PM

Quote from: MZD on February 20, 2014, 07:07:17 PM

Quote from: Beastlymac on February 20, 2014, 07:00:20 PM

The controller firmware can only be installed by jack he isn't making it available for people to use on their own.

In regards to a support thread I am working on one it is linked in my signature.

What the hell?!?!

What if we need to upgrade it? Is it possible to update at home?

From my understanding no. But I am not Jack you will have to ask him directly.

You mentioned before that the units can be over clocked without the new firmware correct ? Can you post a guide how to over clock the units to get the 500 kh/s shown by jack using the new firmware ?

My unit was shipped so should arrive shortly . Would like to get all my instructions in place

Beastlymac

hero member

Activity: 630

Merit: 501

Miner Setup And Reviews. WASP Rep.

Quote from: MZD on February 20, 2014, 07:07:17 PM

Quote from: Beastlymac on February 20, 2014, 07:00:20 PM

The controller firmware can only be installed by jack he isn't making it available for people to use on their own.

In regards to a support thread I am working on one it is linked in my signature.

What the hell?!?!

What if we need to upgrade it? Is it possible to update at home?

From my understanding no. But I am not Jack you will have to ask him directly.

chanberg

hero member

Activity: 672

Merit: 500

Quote from: MZD on February 20, 2014, 07:07:17 PM

Quote from: Beastlymac on February 20, 2014, 07:00:20 PM

The controller firmware can only be installed by jack he isn't making it available for people to use on their own.

In regards to a support thread I am working on one it is linked in my signature.

What the hell?!?!

What if we need to upgrade it? Is it possible to update at home?

its probably because there are competitors also making these miners with no firmware and Jack probably hired programmers to write the firmware...

But this definitely does suck, what if the controllers break, and we need to buy a new Tp-Link?

MZD

full member

Activity: 189

Merit: 100

Quote from: Beastlymac on February 20, 2014, 07:00:20 PM

The controller firmware can only be installed by jack he isn't making it available for people to use on their own.

In regards to a support thread I am working on one it is linked in my signature.

What the hell?!?!

What if we need to upgrade it? Is it possible to update at home?

armaan56

sr. member

Activity: 560

Merit: 250

What's the price for the scrypt miners

Topic: LIGHTNINGASIC LA100M,100MHS SCRYPT Miner, USD1999; LA1THS, USD1750.shipped out! - page 100. (Read 309065 times)