Topic: Linux mining distro for the Raspberry PI - MinePeon - page 13. (Read 685189 times)

If you are running the latest version (0.2.4.6) login via ssh and you will see a command menu.  You can do it from there.

Neil

How do I update my minepeon to the most current version of cgminer through the command line?

Do I have create an addtional/expand a partition?

I am helping someone out on the latest version on the status page it has these fields. I am curious what is the Error and Utility showing. When using a 10 port hub getting 731 errors on one device and 0 Under utility for all devices.

In fact all devices are showing a ton of errors from 2 to 1800 all 9 Asic USB's. Does anyone have any tips to get the Errors down and Accepted up. 3 Accepted 5400 Errors Sad

I am worry about it

I am helping someone out on the latest version on the status page it has these fields. I am curious what is the Error and Utility showing. When using a 10 port hub getting 731 errors on one device and 0 Under utility for all devices.

In fact all devices are showing a ton of errors from 2 to 1800 all 9 Asic USB's. Does anyone have any tips to get the Errors down and Accepted up. 3 Accepted 5400 Errors Sad

I am worry about it

What kind of hub are you using? If it's a USB3 hub, that won't work with a Raspberry Pi.  Some folks have had success by plugging the USB3 hub into a USB2 hub, then plugging the USB2 into the Pi, but that doesn't always work either.

Hi guys, i dont know what to do...

I have raspberry pi with minepeon (MinePeon-0.2.4.6-RaspberryPi.img).

Installed it into a sd card, and i use browser of my desktop to access minepeon on raspberry pi.

I have to antminers U2 connected in an usb hub to the raspberry pi. I setup the pool in minepeon, but it says all the time that no devices running. I dont know what to do. 

As you can see in my last post, it is still there...

I think Neil missed the word "checkout" in the second command:


The idea being, your git pull command is being blocked because it doesn't like something about those two files. If you check out both those files, you should be able to do a git pull successfully, until Neil can figure out and fix the real root cause.

[minepeon@minepeon bitstreams]$ cd /opt/minepeon
[minepeon@minepeon minepeon]$ git checkout bin/scripts/FactoryReset.sh
[minepeon@minepeon minepeon]$ git checkout bin/bitstreams/README
error: pathspec 'bin/bitstreams/README' did not match any file(s) known to git.
[minepeon@minepeon minepeon]$ git pull
Updating 93b1f75..dfdac8b
error: The following untracked working tree files would be overwritten by merge:
        bin/bitstreams/README
Please move or remove them before you can merge.
Aborting
[minepeon@minepeon minepeon]$ rm  bin/bitstreams/README
[minepeon@minepeon minepeon]$ git pull
Updating 93b1f75..dfdac8b
Fast-forward
 bin/bfgminer                              | Bin 628076 -> 641762 bytes
 bin/bfgminer-rpc                          | Bin 9617 -> 9653 bytes
 bin/bitforce-firmware-flash               | Bin 12261 -> 12377 bytes
 bin/bitstreams/README                     |   1 +
 bin/cgminer                               | Bin 838358 -> 736259 bytes
 bin/cgminer-gc3355                        | Bin 0 -> 1514853 bytes
 bin/scripts/FactoryReset.sh               |   1 +
 lib/libblkmaker-0.1.so.0.4.1              | Bin 12992 -> 13087 bytes
 lib/libblkmaker_jansson-0.1.so.0.4.1      | Bin 12345 -> 12333 bytes
 lib/libjansson.a                          | Bin 51296 -> 52296 bytes
 lib/libjansson.so.4.5.0                   | Bin 44953 -> 45142 bytes
 lib/libusb-1.0.a                          | Bin 81526 -> 82114 bytes
 lib/libusb-1.0.so.2.0.0                   | Bin 74778 -> 75203 bytes
 share/doc/bfgminer/AUTHORS                |   3 +-
 share/doc/bfgminer/README                 |  46 +++++++++--
 share/doc/bfgminer/README.RPC             |  39 ++++++++-
 share/doc/bfgminer/rpc-examples/miner.php | 127 ++++++++++++++++++++++++------
 17 files changed, 181 insertions(+), 36 deletions(-)
 create mode 100644 bin/bitstreams/README
 create mode 100755 bin/cgminer-gc3355
[minepeon@minepeon minepeon]$

Thats odd, it seems that there are some changes to a few files that it does not like.  It can easly be fixed though, do this;-

cd /opt/minepeon
git checkout bin/scripts/FactoryReset.sh
git bin/bitstreams/README
git pull

I will try to work out what I did wrong!

Neil

cd /opt/minepeon
git checkout bin/scripts/FactoryReset.sh
git checkout bin/bitstreams/README
git pull

Due to the pointlessness of mining BTC with FPGA, Con removed it since it was the largest file in the distribution and took up about 50% of the file space for everyone downloading cgminer but almost no one uses it - my MMQ sits with my other FPGA quietly watching my ASICs
Just get it from a release before it was removed i.e. 3.12.3 or earlier (8-Feb-2014)

[minepeon@minepeon minepeon]$ cd bin/bitstreams
[minepeon@minepeon bitstreams]$ dir
COPYING_fpgaminer  README  fpgaminer_top_fixed7_197MHz.ncd

...
inside text of README: You must put the file fpgaminer_top_fixed7_197MHz.ncd in here for modminer to w$