Topic: Linux mining distro for the Raspberry PI - MinePeon - page 34. (Read 685189 times)
Well I got a new pi last night and set up a fresh sd card with mine peon and did a git pull to get cgminer 3.9.0. All went well but I can not seem to get my drillbit 8 board to work at all with the pi. I plugged the 8 board straight into the pi and it will not mine. I tried starting cgminer with just the default settings that mine peon uses and also tried some of the drillbit options that work with my board under ubuntu. The errors I was seeing was drillbit failed to initialize and usb errors say insufficient privileges for the port. I will try again tonight and post the exact errors. Anyone have this working on minepeon? Thanks
I will be switching back to BFGMiner when they get their Antminer drivers going since my BiFury and Ice Fury won't get picked up in CGMiner (the version I have to run to get Antminers to work). I'll try the built in Proxy on that here soon (granted the next update works fine on the PI).
I've got bfgminer working with the AntMiner U1 on MinePeon. Seems to work well. The biggest problem is that there is no way to distinguish between Erupters and AntMiner U1s (yet). The custom cgminer build has the same problem (in fact worse). If you have both plugged in you'll need to specify the driver for each with the -S argument.
If you don't have any Erupters plugged in then the following should work:
Code:
bfgminer -S antminer:all
http://www.nwoolls.com/othercontent/AntMiner-U1-bfgminer-MinePeon.png
and when you do have errupters sitting next to antminers (getting 2 antminers). already having a fury and an errupter
Github is was down.
Quote
minepeon /opt/minepeon # git pull
fatal: unable to access 'https://github.com/MineForeman/minepeon-base.git/': The requested URL returned error: 502
fatal: unable to access 'https://github.com/MineForeman/minepeon-base.git/': The requested URL returned error: 502
Quote
github:status
21:54 UTCGitHub and Gist are down. We're working to recover the site.
21:54 UTCGitHub and Gist are down. We're working to recover the site.
I will be switching back to BFGMiner when they get their Antminer drivers going since my BiFury and Ice Fury won't get picked up in CGMiner (the version I have to run to get Antminers to work). I'll try the built in Proxy on that here soon (granted the next update works fine on the PI).
I've got bfgminer working with the AntMiner U1 on MinePeon. Seems to work well. The biggest problem is that there is no way to distinguish between Erupters and AntMiner U1s (yet). The custom cgminer build has the same problem (in fact worse). If you have both plugged in you'll need to specify the driver for each with the -S argument.
If you don't have any Erupters plugged in then the following should work:
Code:
bfgminer -S antminer:all
Great! Up and hashing with 2.5 and 2.2 at 54. Can I change that 54 value in cgminer?
Hashing the next 3 Days only on the Donation Account.
Thanks a lot for your work!
Hashing the next 3 Days only on the Donation Account.
Thanks a lot for your work!
It's only me, or the python2 program cgminerLCDStats.py stopped getting the BTC value of MtGox, some 3 weeks ago? It is getting all info from bfgminer, when installed in a RPI with MinePeon, but stopped getting the BTC value, displaying always $000.00.
Also, you mentioned getting the Anker 10 USB3 hub working on the BBB? It didn't for me, how'd you do it? Did you daisy chain with a USB 2 hub? I'll try again later (running 5 Drillbit boards through a Plugable 7 port hub at the moment to my BBB on Debian).
Yeah, it's through a DLink 7-port.
Feature request:
Any chance of the MinePeon front page being able to display stats from another instance of bfg/cg? MinePeon's front page obviously uses the API, but it'd be brilliant if it could show stats of other cg/bfg instances on the network?
Currently I'm using the normal miner.php hosted off my NAS to display stats from my 2-3 miner instances, but it's ugly and clunky.
Any chance of the MinePeon front page being able to display stats from another instance of bfg/cg? MinePeon's front page obviously uses the API, but it'd be brilliant if it could show stats of other cg/bfg instances on the network?
Currently I'm using the normal miner.php hosted off my NAS to display stats from my 2-3 miner instances, but it's ugly and clunky.
I use this for monitoring multiple miners: https://github.com/selaux/miner-dashboard
It's much better than the miner.php.
Also, you mentioned getting the Anker 10 USB3 hub working on the BBB? It didn't for me, how'd you do it? Did you daisy chain with a USB 2 hub? I'll try again later (running 5 Drillbit boards through a Plugable 7 port hub at the moment to my BBB on Debian).
Feature request:
Any chance of the MinePeon front page being able to display stats from another instance of bfg/cg? MinePeon's front page obviously uses the API, but it'd be brilliant if it could show stats of other cg/bfg instances on the network?
Currently I'm using the normal miner.php hosted off my NAS to display stats from my 2-3 miner instances, but it's ugly and clunky.
Any chance of the MinePeon front page being able to display stats from another instance of bfg/cg? MinePeon's front page obviously uses the API, but it'd be brilliant if it could show stats of other cg/bfg instances on the network?
Currently I'm using the normal miner.php hosted off my NAS to display stats from my 2-3 miner instances, but it's ugly and clunky.
BFG's proxy for me is a little slower than slush's proxy on the Cube, though BFG's proxy is faster for the Blades, I suspect it's due to the lack of Longpoll on BFG's proxy. But I just use BFG's proxy as it's easier to manage, and I don't have to run a PC for the whole thing.
With the Antminers arriving today hopefully I think I'll be mining on the PC again for a little while - at least until BFG with ANT support is released, then it'll be back to the BBB running Debian in expectation of MinePeon for BBB.
With the Antminers arriving today hopefully I think I'll be mining on the PC again for a little while - at least until BFG with ANT support is released, then it'll be back to the BBB running Debian in expectation of MinePeon for BBB.
Have 3 BBB on back order but lord knows for how long 
I haven't tried through BFG. Nwools or whoever just put out a beta driver for the Antminer. It was my RPI and Stratum Proxy. I hope BFG works, have a second cube being delivered tomorrow.
I haven't tried through BFG. Nwools or whoever just put out a beta driver for the Antminer. It was my RPI and Stratum Proxy. I hope BFG works, have a second cube being delivered tomorrow.
Neil I bought a new SanDisk Extreme Pro SDHC card and installed. It is def. stable and loads better now, but the stratum proxy still is moving at 2mph. I am pushing one (tomorrow will be two) AsicMiner Cube's through it.
I've a Cube @ 38GH and two V1 Blades at 13GH each going through BFG's proxy on MinePeon. Current uptime of 4 days and still trucking along at 60-64GH.
There's something wrong with your network or your Pi.
(My Pi is powered off the back of my Airport Extreme, Blades and Cubes are connecting via Powerline adapters, so my rig is not optimal in ANY shape, form or fashion).
Can nothing be done to fix the rPi USB interface?
No, it's shit. It's the SOC's USB that sucks, so unless they change the SOC the shit USB is going to be there for good. If they change the SOC, then it's no longer a Pi.
That's why the BBB works, it uses a totally different Ti ARMv7 SOC, not the older ARMv6 in the Pi.
To be fair on the designers of the Pi, the USB was there for a USB keyboard and perhaps a USB wifi dongle so school kids could get the things running (hence the composite video output also). It was never designed to run 20-odd bitcoin miners hanging off multiple hubs. They would probably have put a couple of PS2 ports on the thing if they had designed it a few years earlier...
The BeagleBone Black's design is more geared towards the 'hobbyist', so faster more capable SOC, better cape support, and the eMMC is fantastic to have.
Fair comment, they were designed to be destroyed in the classroom, not supporting a bank clearing house.
Can nothing be done to fix the rPi USB interface?
No, it's shit. It's the SOC's USB that sucks, so unless they change the SOC the shit USB is going to be there for good. If they change the SOC, then it's no longer a Pi.
That's why the BBB works, it uses a totally different Ti ARMv7 SOC, not the older ARMv6 in the Pi.
To be fair on the designers of the Pi, the USB was there for a USB keyboard and perhaps a USB wifi dongle so school kids could get the things running (hence the composite video output also). It was never designed to run 20-odd bitcoin miners hanging off multiple hubs. They would probably have put a couple of PS2 ports on the thing if they had designed it a few years earlier...
The BeagleBone Black's design is more geared towards the 'hobbyist', so faster more capable SOC, better cape support, and the eMMC is fantastic to have.
3 days solid mining here on the BBB with hidapi on Debian. Mining like a champ with two IceFurys, and two Jalapenos.
The BBB is defiantly the best of the ARM platforms, there are still issues though but I am slowly working through them.
Next release of MinePeon will be available for the BBB in addition to the CubeBoard2.
Neil
I'm looking forward to it - I would nearly buy another BBB, but they're terribly difficult to find in stock anywhere in the UK or EU. The Pi is dead on as a little network device, but it really does fill it's pants when asked to do a lot of USB stuff, especially considering the NIC also hangs off the USB bus. Looks like I'll be running a pair of MinePeons - the RPi for proxy service, and the BBB for the USB miners, as I am now with Minepeon on the Pi and Debian on the BBB. Heck, the BBB even works with the Anker 10-port USB3 hub!
Only real complaint about the BBB is the lights - they're OMG bright!
3 days solid mining here on the BBB with hidapi on Debian. Mining like a champ with two IceFurys, and two Jalapenos.
The BBB is defiantly the best of the ARM platforms, there are still issues though but I am slowly working through them.
Next release of MinePeon will be available for the BBB in addition to the CubeBoard2.
Neil
I'm looking forward to it - I would nearly buy another BBB, but they're terribly difficult to find in stock anywhere in the UK or EU. The Pi is dead on as a little network device, but it really does fill it's pants when asked to do a lot of USB stuff, especially considering the NIC also hangs off the USB bus. Looks like I'll be running a pair of MinePeons - the RPi for proxy service, and the BBB for the USB miners, as I am now with Minepeon on the Pi and Debian on the BBB. Heck, the BBB even works with the Anker 10-port USB3 hub!
Only real complaint about the BBB is the lights - they're OMG bright!
It is my understanding that Vs3 has sent ckolivas a nanofury compatible version of cgminer?
Indeed. It's a modified clone of Legkodymov's clone. If anyone else is interested - feel free to PM me. It has some limitations - like I made it work for Windows and in the process may have broken other OSes so whoever intends to play with it would need to know how to troubleshoot those, it stops scanning after the first device, etc. That's also the same one that Marto74 used for his patch.
Alternatively if you want to start from scratch - the file you're looking for is : https://github.com/nanofury/NanoFury_Init/blob/master/nf1_init/nf_spidevc.cpp (and the .h one)
Next release of MinePeon will be available for the BBB in addition to the CubeBoard2.
Great! Thank you MineForman. 
Dose the new cgminer build have drillbit support enabled?
It does now, I have not tested it yet and make sure you update using ssh and;-
cd /opt/minepeon/
git pull
I have not tested it though (I don't have a drillbit) so get back to me if you have issues.
Neil
3 days solid mining here on the BBB with hidapi on Debian. Mining like a champ with two IceFurys, and two Jalapenos.
The BBB is defiantly the best of the ARM platforms, there are still issues though but I am slowly working through them.
Next release of MinePeon will be available for the BBB in addition to the CubeBoard2.
Neil
Jump to: