LinuxCoin A lightweight Debian based OS with everything ready to go. - page 11.

Clarithium

member

Activity: 93

Merit: 10

I'm having a problem with my Linuxcoin. I have 3 x 6970's all running, and when I use GUI miner only one card works, and it doesn't tell my my mhash/s it just says "Starting..."

Its clearly mining because my deepbit.net is recognizing the mhash and it says im getting shares. I DID update successfully with the hotfix, and I have persistent storage. Also, when I use the "start_mining" script in LXTerminal, and I type my info in, nothing pops up, the new terminal screen that would usually pop up and tell me my mhash just instantly closes.

I did NOT have this problem with the same configuration with a previous version of LinuxCoin.

Also, I did enable the AMD APP kit.

Help? Huh

//EDIT: Flags im using are -v -w128

pekv2

hero member

Activity: 770

Merit: 502

Same thing.

Code:

Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

drgr33n

sr. member

Activity: 308

Merit: 251

Quote from: pekv2 on August 20, 2011, 08:28:23 PM

oh noes, I seen this before on debian.

Code:

Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

Yup just means it cannot read the partition type from the media. It's because grsec has denied access to udisks. You could load the module manually...

Code:

modprobe vfat

Then try and mount.

pekv2

hero member

Activity: 770

Merit: 502

oh noes, I seen this before on debian.

Code:

Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

drgr33n

sr. member

Activity: 308

Merit: 251

pekv2

hero member

Activity: 770

Merit: 502

Quote from: drgr33n on August 20, 2011, 07:48:10 PM

Gpod stuff Wink

Glad you got there in the end !! The desktop error was an unexpected bug Sad

Open up a root term and type

Code:

chmod 777 /home/user/Desktop

The second is very strange ? Can you plug in some flash media and post output of

Code:

modprobe vfat
dmesg

Hopefully I compiled vfat support into the kernel :/

Code:

root@linuxcoin:/home/user# modprobe vfat
root@linuxcoin:/home/user# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.39-3-amd64 (Debian 2.6.39-4) ([email protected]) (gcc version 4.4.6 (Debian 4.4.6-7) ) #1 SMP PREEMPT Mon Jul 25 11:33:19 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-3-amd64 root=UUID=39ed3cfc-0e4b-4694-8956-8987ef4e112b ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6dd000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6dd000 - 000000003f6e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: LENOVO 88088NU/LENOVO, BIOS 2JKT49AUS 12/12/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3f6d0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f62c0] f62c0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f6d0000
[ 0.000000] 0000000000 - 003f600000 page 2M
[ 0.000000] 003f600000 - 003f6d0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f6d0000 @ 3f6cd000-3f6d0000
[ 0.000000] RAMDISK: 35f10000 - 36f80000
[ 0.000000] ACPI: RSDP 00000000000f6170 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 000000003f6d32c4 00040 (v01 LENOVO TC-2J 00000049 LTP 00000000)
[ 0.000000] ACPI: FACP 000000003f6dce2b 00074 (v01 LENOVO TC-2J 00000049 PTL 00000001)
[ 0.000000] ACPI: DSDT 000000003f6d62e4 06B47 (v01 LENOVO TC-2J 00000049 MSFT 0100000E)
[ 0.000000] ACPI: FACS 000000003f6dffc0 00040
[ 0.000000] ACPI: TCPA 000000003f6dce9f 00032 (v02 LENOVO TC-2J 00000049 PTL 00000000)
[ 0.000000] ACPI: ASF! 000000003f6dced1 00063 (v16 CETP 2JETP 00000049 PTL 00000001)
[ 0.000000] ACPI: MCFG 000000003f6dcf34 0003C (v01 PTLTD M2JG 00000049 LTP 00000000)
[ 0.000000] ACPI: APIC 000000003f6dcf70 00068 (v01 PTLTD ? A2JC 00000049 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000003f6dcfd8 00028 (v01 PTLTD $SB2JBL$ 00000049 LTP 00000001)
[ 0.000000] ACPI: SSDT 000000003f6d3304 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003f6d0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-000000003f6d0000
[ 0.000000] NODE_DATA [000000003f6c8000 - 000000003f6ccfff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003de00000-ffff88003ebfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003f6d0
[ 0.000000] On node 0 totalpages: 259677
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3496 pages used for memmap
[ 0.000000] DMA32 zone: 252200 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff88003f400000 s68928 r8192 d21184 u1048576
[ 0.000000] pcpu-alloc: s68928 r8192 d21184 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 256120
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-3-amd64 root=UUID=39ed3cfc-0e4b-4694-8956-8987ef4e112b ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 993428k/1039168k available (3474k kernel code, 460k absent, 45280k reserved, 8415k data, 568k init)
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:4776 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3388.806 MHz processor.
[ 0.002004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6777.12 BogoMIPS (lpj=3388806)
[ 0.002010] pid_max: default: 32768 minimum: 501
[ 0.003081] Security Framework initialized
[ 0.003088] SELinux: Disabled at boot.
[ 0.003311] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004029] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.004332] Mount-cache hash table entries: 256
[ 0.004534] Initializing cgroup subsys ns
[ 0.004539] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004543] Initializing cgroup subsys memory
[ 0.004562] Initializing cgroup subsys devices
[ 0.004566] Initializing cgroup subsys freezer
[ 0.004569] Initializing cgroup subsys net_cls
[ 0.004573] Initializing cgroup subsys blkio
[ 0.004648] CPU: Physical Processor ID: 0
[ 0.004651] CPU: Processor Core ID: 0
[ 0.004654] mce: CPU supports 4 MCE banks
[ 0.004666] CPU0: Thermal monitoring handled by SMI
[ 0.004671] using mwait in idle threads.
[ 0.006169] ACPI: Core revision 20110316
[ 0.012262] Setting APIC routing to flat
[ 0.013278] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024090] CPU0: Intel(R) Pentium(R) D CPU 3.40GHz stepping 05
[ 0.024998] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.024998] ... version: 0
[ 0.024998] ... bit width: 40
[ 0.024998] ... generic registers: 18
[ 0.024998] ... value mask: 000000ffffffffff
[ 0.024998] ... max period: 0000007fffffffff
[ 0.024998] ... fixed-purpose events: 0
[ 0.024998] ... event mask: 000000000003ffff
[ 0.028108] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.036028] Booting Node 0, Processors #1
[ 0.036034] smpboot cpu 1: start_ip = 98000
[ 0.036021] CPU1: Thermal monitoring handled by SMI
[ 0.108019] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.108073] Brought up 2 CPUs
[ 0.108077] Total of 2 processors activated (13554.35 BogoMIPS).
[ 0.109134] devtmpfs: initialized
[ 0.112467] PM: Registering ACPI NVS region at 3f6dd000 (12288 bytes)
[ 0.112700] print_constraints: dummy:
[ 0.112830] NET: Registered protocol family 16
[ 0.113010] ACPI: bus type pci registered
[ 0.113105] PCI: MMCONFIG for domain 0000 [bus 00-09] at [mem 0xe0000000-0xe09fffff] (base 0xe0000000)
[ 0.113109] PCI: MMCONFIG at [mem 0xe0000000-0xe09fffff] reserved in E820
[ 0.113190] PCI: Using configuration type 1 for base access
[ 0.115114] bio: create slab at 0
[ 0.116944] ACPI: EC: Look up EC in DSDT
[ 0.121737] ACPI: SSDT 000000003f6d4709 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.122184] ACPI: Dynamic OEM Table Load:
[ 0.122189] ACPI: SSDT (nil) 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.122964] ACPI: SSDT 000000003f6d4928 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.123402] ACPI: Dynamic OEM Table Load:
[ 0.123407] ACPI: SSDT (nil) 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.123732] ACPI: Interpreter enabled
[ 0.123736] ACPI: (supports S0 S3 S4 S5)
[ 0.123766] ACPI: Using IOAPIC for interrupt routing
[ 0.133049] ACPI: No dock devices found.
[ 0.133053] HEST: Table not found.
[ 0.133057] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.134331] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110316/nspredef-352)
[ 0.134343] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.134345] _OSC request data:1 8 1f
[ 0.134352] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.136624] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.136628] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.136632] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.136635] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.136639] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.136642] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.136646] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xdfffffff]
[ 0.136650] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed4ffff]
[ 0.136653] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xfdff]
[ 0.136674] pci 0000:00:00.0: [8086:2990] type 0 class 0x000600
[ 0.136734] pci 0000:00:02.0: [8086:2992] type 0 class 0x000300
[ 0.136750] pci 0000:00:02.0: reg 10: [mem 0xd0000000-0xd00fffff]
[ 0.136765] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.136772] pci 0000:00:02.0: reg 20: [io 0x30e0-0x30e7]
[ 0.136838] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.136886] pci 0000:00:1a.0: reg 20: [io 0x3000-0x301f]
[ 0.136937] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.136959] pci 0000:00:1a.7: reg 10: [mem 0xd0404000-0xd04043ff]
[ 0.137046] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.137052] pci 0000:00:1a.7: PME# disabled
[ 0.137081] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.137101] pci 0000:00:1b.0: reg 10: [mem 0xd0200000-0xd0203fff 64bit]
[ 0.137167] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.137172] pci 0000:00:1b.0: PME# disabled
[ 0.137198] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.137263] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.137268] pci 0000:00:1c.0: PME# disabled
[ 0.137299] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.137364] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.137369] pci 0000:00:1c.4: PME# disabled
[ 0.137397] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.137443] pci 0000:00:1d.0: reg 20: [io 0x3020-0x303f]
[ 0.137481] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.137527] pci 0000:00:1d.1: reg 20: [io 0x3040-0x305f]
[ 0.137564] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.137610] pci 0000:00:1d.2: reg 20: [io 0x3060-0x307f]
[ 0.137658] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.137681] pci 0000:00:1d.7: reg 10: [mem 0xd0404400-0xd04047ff]
[ 0.137760] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.137766] pci 0000:00:1d.7: PME# disabled
[ 0.137789] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.137858] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
[ 0.137947] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.137953] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.137959] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.138012] pci 0000:00:1f.2: [8086:2820] type 0 class 0x000101
[ 0.138029] pci 0000:00:1f.2: reg 10: [io 0x30f8-0x30ff]
[ 0.138039] pci 0000:00:1f.2: reg 14: [io 0x30ec-0x30ef]
[ 0.138048] pci 0000:00:1f.2: reg 18: [io 0x30f0-0x30f7]
[ 0.138058] pci 0000:00:1f.2: reg 1c: [io 0x30e8-0x30eb]
[ 0.138067] pci 0000:00:1f.2: reg 20: [io 0x30b0-0x30bf]
[ 0.138077] pci 0000:00:1f.2: reg 24: [io 0x30a0-0x30af]
[ 0.138104] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.138109] pci 0000:00:1f.2: PME# disabled
[ 0.138126] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.138140] pci 0000:00:1f.3: reg 10: [mem 0xd0404800-0xd04048ff]
[ 0.138172] pci 0000:00:1f.3: reg 20: [io 0x3080-0x309f]
[ 0.138211] pci 0000:00:1f.5: [8086:2825] type 0 class 0x000101
[ 0.138228] pci 0000:00:1f.5: reg 10: [io 0x3410-0x3417]
[ 0.138238] pci 0000:00:1f.5: reg 14: [io 0x3404-0x3407]
[ 0.138248] pci 0000:00:1f.5: reg 18: [io 0x3408-0x340f]
[ 0.138258] pci 0000:00:1f.5: reg 1c: [io 0x3400-0x3403]
[ 0.138267] pci 0000:00:1f.5: reg 20: [io 0x30d0-0x30df]
[ 0.138277] pci 0000:00:1f.5: reg 24: [io 0x30c0-0x30cf]
[ 0.138303] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.138308] pci 0000:00:1f.5: PME# disabled
[ 0.138363] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.138369] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled)
[ 0.138374] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.138381] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.138457] pci 0000:03:00.0: [14e4:169b] type 0 class 0x000200
[ 0.138484] pci 0000:03:00.0: reg 10: [mem 0xd0100000-0xd010ffff 64bit]
[ 0.138594] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.138600] pci 0000:03:00.0: PME# disabled
[ 0.140013] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.140020] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.140027] pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.140037] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.140120] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a] (subtractive decode)
[ 0.140125] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.140130] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.140137] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.140141] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.140145] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.140148] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.140152] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.140156] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.140159] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.140163] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xdfffffff] (subtractive decode)
[ 0.140167] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed4ffff] (subtractive decode)
[ 0.140171] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
[ 0.140191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.140613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.140719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.140852] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.141226] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110316/nspredef-352)
[ 0.141237] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.141240] _OSC request data:1 1f 1f
[ 0.141248] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.141360] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110316/nspredef-352)
[ 0.141371] \_SB_.PCI0:_OSC evaluation returned wrong type
[ 0.141373] _OSC request data:1 0 1d
[ 0.141378] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.152633] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.152739] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
[ 0.152840] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.152941] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.153060] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.153168] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.153276] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.153384] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.153555] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.153574] vgaarb: loaded
[ 0.153641] PCI: Using ACPI for IRQ routing
[ 0.153645] PCI: pci_cache_line_size set to 64 bytes
[ 0.153739] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.153744] reserve RAM buffer: 000000003f6d0000 - 000000003fffffff
[ 0.156512] pnp: PnP ACPI init
[ 0.156537] ACPI: bus type pnp registered
[ 0.157686] pnp 00:00: [bus 00-ff]
[ 0.157691] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.157694] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.157698] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.157701] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.157704] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.157708] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.157711] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.157714] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.157718] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.157721] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.157724] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.157727] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.157731] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.157734] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.157737] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.157740] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.157744] pnp 00:00: [mem 0x40000000-0xdfffffff window]
[ 0.157749] pnp 00:00: [mem 0xfed40000-0xfed4ffff window]
[ 0.157752] pnp 00:00: [io 0x0d00-0xfdff window]
[ 0.157828] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.158059] pnp 00:01: [io 0x0010-0x001f]
[ 0.158063] pnp 00:01: [io 0x0024-0x0025]
[ 0.158066] pnp 00:01: [io 0x0028-0x0029]
[ 0.158069] pnp 00:01: [io 0x002c-0x002d]
[ 0.158071] pnp 00:01: [io 0x002e-0x002f]
[ 0.158074] pnp 00:01: [io 0x0030-0x0031]
[ 0.158077] pnp 00:01: [io 0x0034-0x0035]
[ 0.158080] pnp 00:01: [io 0x0038-0x0039]
[ 0.158082] pnp 00:01: [io 0x003c-0x003d]
[ 0.158085] pnp 00:01: [io 0x0060-0x0066]
[ 0.158088] pnp 00:01: [io 0x0072-0x0077]
[ 0.158090] pnp 00:01: [io 0x0080]
[ 0.158093] pnp 00:01: [io 0x0090-0x009f]
[ 0.158096] pnp 00:01: [io 0x00a4-0x00a5]
[ 0.158099] pnp 00:01: [io 0x00a8-0x00a9]
[ 0.158101] pnp 00:01: [io 0x00ac-0x00ad]
[ 0.158104] pnp 00:01: [io 0x00b0-0x00b5]
[ 0.158107] pnp 00:01: [io 0x00b8-0x00b9]
[ 0.158110] pnp 00:01: [io 0x00bc-0x00bd]
[ 0.158112] pnp 00:01: [io 0x00ed]
[ 0.158115] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.158118] pnp 00:01: [io 0x0500-0x057f]
[ 0.158121] pnp 00:01: [io 0x0800-0x080f]
[ 0.158125] pnp 00:01: [io 0x1000-0x107f]
[ 0.158127] pnp 00:01: [io 0x1180-0x11bf]
[ 0.158130] pnp 00:01: [io 0xc800-0xc87f]
[ 0.158133] pnp 00:01: [io 0xc880-0xc8ff]
[ 0.158136] pnp 00:01: [io 0xfe00]
[ 0.158150] pnp 00:01: [irq 1]
[ 0.158159] pnp 00:01: [irq 12]
[ 0.158162] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.158165] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.158168] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.158171] pnp 00:01: [mem 0xfed50000-0xfed8ffff]
[ 0.158174] pnp 00:01: [mem 0xfef00000-0xfeffffff]
[ 0.158296] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.158301] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.158305] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.158309] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.158313] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.158317] system 00:01: [io 0xc800-0xc87f] has been reserved
[ 0.158321] system 00:01: [io 0xc880-0xc8ff] has been reserved
[ 0.158325] system 00:01: [io 0xfe00] has been reserved
[ 0.158330] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.158334] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.158339] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.158343] system 00:01: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.158347] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.158352] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.158371] pnp 00:02: [io 0x0000-0x000f]
[ 0.158375] pnp 00:02: [io 0x0081-0x008f]
[ 0.158377] pnp 00:02: [io 0x00c0-0x00df]
[ 0.158380] pnp 00:02: [dma 4]
[ 0.158430] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.158448] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.158455] pnp 00:03: [irq 13]
[ 0.158505] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.158584] pnp 00:04: [io 0x0070-0x0071]
[ 0.158592] pnp 00:04: [irq 8]
[ 0.158645] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.158663] pnp 00:05: [io 0x0061]
[ 0.158714] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.158968] pnp 00:06: [mem 0xff800000-0xffffffff]
[ 0.159035] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.159341] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.159349] pnp 00:07: [irq 4]
[ 0.159473] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.159957] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.159961] pnp 00:08: [io 0x03f7]
[ 0.159968] pnp 00:08: [irq 6]
[ 0.159971] pnp 00:08: [dma 2]
[ 0.160068] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.160752] pnp 00:09: [io 0x0378-0x037f]
[ 0.160756] pnp 00:09: [io 0x0778-0x077f]
[ 0.160763] pnp 00:09: [irq 7]
[ 0.160766] pnp 00:09: [dma 1]
[ 0.160894] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.161543] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.161632] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.161637] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.161705] pnp: PnP ACPI: found 11 devices
[ 0.161707] ACPI: ACPI bus type pnp unregistered
[ 0.169134] Switching to clocksource acpi_pm
[ 0.169213] pci 0000:00:1c.4: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.169220] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.169225] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40200000-0x403fffff]
[ 0.169231] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
[ 0.169237] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.169241] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.169245] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.169251] pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff]
[ 0.169257] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff 64bit pref]
[ 0.169264] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.169268] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.169274] pci 0000:00:1c.4: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.169279] pci 0000:00:1c.4: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.169287] pci 0000:00:1e.0: PCI bridge to [bus 0a-0a]
[ 0.169289] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.169295] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.169299] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.169312] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.169328] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.169335] pci 0000:00:1c.0: setting latency timer to 64
[ 0.169344] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.169349] pci 0000:00:1c.4: setting latency timer to 64
[ 0.169357] pci 0000:00:1e.0: setting latency timer to 64
[ 0.169362] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.169365] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.169368] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.169371] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.169374] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.169377] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.169380] pci_bus 0000:00: resource 10 [mem 0x40000000-0xdfffffff]
[ 0.169383] pci_bus 0000:00: resource 11 [mem 0xfed40000-0xfed4ffff]
[ 0.169386] pci_bus 0000:00: resource 12 [io 0x0d00-0xfdff]
[ 0.169390] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.169393] pci_bus 0000:02: resource 1 [mem 0x40200000-0x403fffff]
[ 0.169396] pci_bus 0000:02: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
[ 0.169399] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.169402] pci_bus 0000:03: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.169405] pci_bus 0000:03: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.169409] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.169411] pci_bus 0000:0a: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.169414] pci_bus 0000:0a: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.169417] pci_bus 0000:0a: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.169420] pci_bus 0000:0a: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.169423] pci_bus 0000:0a: resource 9 [mem 0x000dc000-0x000dffff]
[ 0.169426] pci_bus 0000:0a: resource 10 [mem 0x40000000-0xdfffffff]
[ 0.169429] pci_bus 0000:0a: resource 11 [mem 0xfed40000-0xfed4ffff]
[ 0.169432] pci_bus 0000:0a: resource 12 [io 0x0d00-0xfdff]
[ 0.169555] NET: Registered protocol family 2
[ 0.169720] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.169834] Switched to NOHz mode on CPU #0
[ 0.169844] Switched to NOHz mode on CPU #1
[ 0.170483] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.171597] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.172282] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.172285] TCP reno registered
[ 0.172298] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.172315] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.172533] NET: Registered protocol family 1
[ 0.172560] pci 0000:00:02.0: Boot video device
[ 0.172696] PCI: CLS 32 bytes, default 64
[ 0.172777] Unpacking initramfs...
[ 0.660288] Freeing initrd memory: 16832k freed
[ 0.670929] Simple Boot Flag at 0x44 set to 0x1
[ 0.671504] audit: initializing netlink socket (disabled)
[ 0.671529] type=2000 audit(1313888290.670:1): initialized
[ 0.671538] kretprobe: lookup failed: __switch_to
[ 0.671899] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.672487] VFS: Disk quotas dquot_6.5.2
[ 0.672544] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.672643] msgmni has been set to 1973
[ 0.673122] alg: No test for stdrng (krng)
[ 0.673205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.673212] io scheduler noop registered
[ 0.673215] io scheduler deadline registered
[ 0.673265] io scheduler cfq registered (default)
[ 0.673414] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.673467] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.673549] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.673594] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 0.673820] ERST: Table is not found!
[ 0.673925] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.694524] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.771723] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.787217] Linux agpgart interface v0.103
[ 0.787329] agpgart-intel 0000:00:00.0: Intel 965Q Chipset
[ 0.787441] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.788318] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.788461] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.788631] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.791505] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.791553] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.791691] mousedev: PS/2 mouse device common for all mice
[ 0.791756] rtc_cmos 00:04: RTC can wake from S4
[ 0.796152] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.796179] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.796194] cpuidle: using governor ladder
[ 0.796197] cpuidle: using governor menu
[ 0.796578] TCP cubic registered
[ 0.796698] NET: Registered protocol family 10
[ 0.797545] Mobile IPv6
[ 0.797550] NET: Registered protocol family 17
[ 0.797557] Registering the dns_resolver key type
[ 0.797715] PM: Hibernation image not present or could not be loaded.
[ 0.797731] registered taskstats version 1
[ 0.798230] rtc_cmos 00:04: setting system clock to 2011-08-21 00:58:11 UTC (1313888291)
[ 0.798303] Initializing network drop monitor service
[ 0.798879] Freeing unused kernel memory: 568k freed
[ 0.799213] BFS CPU scheduler v0.406 by Con Kolivas.
[ 0.909739] udevd[52]: starting version 172
[ 0.945035] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0
[ 0.945044] ACPI: Power Button [PWRB]
[ 0.945120] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.945125] ACPI: Power Button [PWRF]
[ 1.070142] usbcore: registered new interface driver usbfs
[ 1.070457] usbcore: registered new interface driver hub
[ 1.070577] usbcore: registered new device driver usb
[ 1.070731] tg3.c:v3.117 (January 25, 2011)
[ 1.070748] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.070759] tg3 0000:03:00.0: setting latency timer to 64
[ 1.078628] FDC 0 is a post-1991 82077
[ 1.088721] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.088803] ehci_hcd 0000:00:1a.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.088829] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.088834] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.088869] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.089158] SCSI subsystem initialized
[ 1.091050] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.096486] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.096516] ehci_hcd 0000:00:1a.7: irq 16, io mem 0xd0404000
[ 1.098761] tg3 0000:03:00.0: eth0: Tigon3 [partno(BCM95751) rev b002] (PCI Express) MAC address 00:16:41:6c:56:19
[ 1.098767] tg3 0000:03:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.098771] tg3 0000:03:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.098775] tg3 0000:03:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.106042] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.106096] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.106112] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.106117] usb usb1: Product: EHCI Host Controller
[ 1.106121] usb usb1: Manufacturer: Linux 2.6.39-3-amd64 ehci_hcd
[ 1.106134] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.106894] hub 1-0:1.0: USB hub found
[ 1.106904] hub 1-0:1.0: 2 ports detected
[ 1.107060] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.107089] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.107094] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.107106] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.110507] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.113569] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.114406] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.114420] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xd0404400
[ 1.124034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.124075] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.124081] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.124085] usb usb2: Product: EHCI Host Controller
[ 1.124089] usb usb2: Manufacturer: Linux 2.6.39-3-amd64 ehci_hcd
[ 1.124093] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.124368] hub 2-0:1.0: USB hub found
[ 1.124377] hub 2-0:1.0: 6 ports detected
[ 1.124496] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.124507] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.124511] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.124523] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.128057] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00003000
[ 1.128123] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.128128] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.128132] usb usb3: Product: UHCI Host Controller
[ 1.128136] usb usb3: Manufacturer: Linux 2.6.39-3-amd64 uhci_hcd
[ 1.128140] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.128286] hub 3-0:1.0: USB hub found
[ 1.128293] hub 3-0:1.0: 2 ports detected
[ 1.128392] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.128400] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.128404] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.128419] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.131053] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003020
[ 1.131113] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.131118] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.131122] usb usb4: Product: UHCI Host Controller
[ 1.131126] usb usb4: Manufacturer: Linux 2.6.39-3-amd64 uhci_hcd
[ 1.131129] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.131274] hub 4-0:1.0: USB hub found
[ 1.131280] hub 4-0:1.0: 2 ports detected
[ 1.131381] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.131389] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.131393] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.131405] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 1.136074] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00003040
[ 1.136130] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.136134] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.136137] usb usb5: Product: UHCI Host Controller
[ 1.136139] usb usb5: Manufacturer: Linux 2.6.39-3-amd64 uhci_hcd
[ 1.136142] usb usb5: SerialNumber: 0000:00:1d.1
[ 1.136324] hub 5-0:1.0: USB hub found
[ 1.136332] hub 5-0:1.0: 2 ports detected
[ 1.136461] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.136473] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.136477] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.136489] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 1.140059] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003060
[ 1.140107] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.140111] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.140114] usb usb6: Product: UHCI Host Controller
[ 1.140117] usb usb6: Manufacturer: Linux 2.6.39-3-amd64 uhci_hcd
[ 1.140120] usb usb6: SerialNumber: 0000:00:1d.2
[ 1.140251] hub 6-0:1.0: USB hub found
[ 1.140257] hub 6-0:1.0: 2 ports detected
[ 1.149500] [drm] Initialized drm 1.1.0 20060810
[ 1.150737] libata version 3.00 loaded.
[ 1.164067] ata_piix 0000:00:1f.2: version 2.13
[ 1.164089] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.164097] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.315065] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.315520] scsi0 : ata_piix
[ 1.315674] scsi1 : ata_piix
[ 1.316662] ata1: SATA max UDMA/133 cmd 0x30f8 ctl 0x30ec bmdma 0x30b0 irq 17
[ 1.316670] ata2: SATA max UDMA/133 cmd 0x30f0 ctl 0x30e8 bmdma 0x30b8 irq 17
[ 1.316708] ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.316715] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.408031] usb 1-2: new high speed USB device number 2 using ehci_hcd
[ 1.467041] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.467361] scsi2 : ata_piix
[ 1.467448] scsi3 : ata_piix
[ 1.468254] ata3: SATA max UDMA/133 cmd 0x3410 ctl 0x3404 bmdma 0x30d0 irq 18
[ 1.468261] ata4: SATA max UDMA/133 cmd 0x3408 ctl 0x3400 bmdma 0x30d8 irq 18
[ 1.468327] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.468333] i915 0000:00:02.0: setting latency timer to 64
[ 1.503578] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 1.503586] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.503589] [drm] Driver supports precise vblank timestamp query.
[ 1.512866] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.513188] [drm] initialized overlay support
[ 1.525830] usb 1-2: New USB device found, idVendor=05e3, idProduct=0723
[ 1.525837] usb 1-2: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[ 1.525841] usb 1-2: Product: USB Storage
[ 1.525845] usb 1-2: Manufacturer: Generic
[ 1.532487] usbcore: registered new interface driver uas
[ 1.588500] fbcon: inteldrmfb (fb0) is primary device
[ 1.629351] Console: switching to colour frame buffer device 160x64
[ 1.633894] fb0: inteldrmfb frame buffer device
[ 1.633897] drm: registered panic notifier
[ 1.633963] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110316/video-1148)
[ 1.634084] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input2
[ 1.634093] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 1.634341] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.672038] Refined TSC clocksource calibration: 3389.032 MHz.
[ 1.672046] Switching to clocksource tsc
[ 1.783802] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.794622] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.910019] usb 5-1: new low speed USB device number 2 using uhci_hcd
[ 2.077076] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.077096] ata1.01: SATA link down (SStatus 4 SControl 300)
[ 2.077281] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.077295] ata2.01: SATA link down (SStatus 4 SControl 300)
[ 2.077306] ata2.01: link offline, clearing class 3 to NONE
[ 2.081121] usb 5-1: New USB device found, idVendor=045e, idProduct=008a
[ 2.081126] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.081128] usb 5-1: Product: Microsoft Wireless Optical DesktopÂ® 1.00
[ 2.081131] usb 5-1: Manufacturer: Microsoft
[ 2.094816] ata1.00: ATA-7: WDC WD800JD-08MSA1, 10.01E01, max UDMA/133
[ 2.094823] ata1.00: 156312576 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.096176] ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-H10N, 1.03, max UDMA/100
[ 2.098304] ata1.00: configured for UDMA/133
[ 2.098477] scsi 0:0:0:0: Direct-Access ATA WDC WD800JD-08MS 10.0 PQ: 0 ANSI: 5
[ 2.122153] ata2.00: configured for UDMA/100
[ 2.123206] input: Microsoft Microsoft Wireless Optical DesktopÂ® 1.00 as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.0/input/input3
[ 2.123296] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-H10N 1.03 PQ: 0 ANSI: 5
[ 2.126240] generic-usb 0003:045E:008A.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical DesktopÂ® 1.00] on usb-0000:00:1d.1-1/input0
[ 2.136327] Initializing USB Mass Storage driver...
[ 2.136572] scsi4 : usb-storage 1-2:1.0
[ 2.136718] usbcore: registered new interface driver usb-storage
[ 2.136721] USB Mass Storage support registered.
[ 2.143696] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.143703] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.144276] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.148029] sd 0:0:0:0: [sda] 156312576 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 2.148122] sd 0:0:0:0: [sda] Write Protect is off
[ 2.148127] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.148159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.152617] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.152814] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.163836] sda: sda1 sda2
[ 2.164219] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.231289] input: Microsoft Microsoft Wireless Optical DesktopÂ® 1.00 as /devices/pci0000:00/0000:00:1d.1/usb5/5-1/5-1:1.1/input/input4
[ 2.231462] generic-usb 0003:045E:008A.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical DesktopÂ® 1.00] on usb-0000:00:1d.1-1/input1
[ 2.231504] usbcore: registered new interface driver usbhid
[ 2.231507] usbhid: USB HID core driver
[ 2.450133] aufs: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.455874] aufs 2.1-standalone.tree-39-rcN-20110418
[ 2.755629] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.137361] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9454 PQ: 0 ANSI: 0
[ 3.138269] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.531220] sd 4:0:0:0: [sdb] 16015360 512-byte logical blocks: (8.19 GB/7.63 GiB)
[ 3.532337] sd 4:0:0:0: [sdb] Write Protect is off
[ 3.532343] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 3.532347] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.534961] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.536366] sdb: sdb1
[ 3.538597] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 3.538660] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 4.098927] udevd[313]: starting version 172
[ 4.387388] ACPI: acpi_idle registered with cpuidle
[ 4.576887] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.595905] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
[ 4.595918] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.635072] parport_pc 00:09: reported by Plug and Play ACPI
[ 4.635140] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 4.938578] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.938679] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 4.938721] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.121438] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 6.751344] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 6.881468] device-mapper: uevent: version 1.0.3
[ 6.881779] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 8.332658] RPC: Registered udp transport module.
[ 8.332662] RPC: Registered tcp transport module.
[ 8.332665] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.394205] FS-Cache: Loaded
[ 8.439311] FS-Cache: Netfs 'nfs' registered for caching
[ 8.455554] Installing knfsd (copyright (C) 1996 [email protected]).
[ 8.726988] fuse init (API version 7.16)
[ 9.767069] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 9.773043] NFSD: starting 90-second grace period
[ 11.033866] tg3 0000:03:00.0: irq 44 for MSI/MSI-X
[ 11.055780] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.693513] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 12.693518] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
[ 12.693662] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.695476] watchdog (2488): /proc/2488/oom_adj is deprecated, please use /proc/2488/oom_score_adj instead.
[ 23.122008] eth0: no IPv6 routers present
[ 26.902516] grsec: denied attempt to auto-load fs module vfat by udisks
[ 35.146327] grsec: denied attempt to auto-load fs module vfat by udisks
root@linuxcoin:/home/user#

drgr33n

sr. member

Activity: 308

Merit: 251

Quote from: pekv2 on August 20, 2011, 07:15:08 PM

Quote from: drgr33n on August 20, 2011, 01:48:15 PM

Whoooo there boy !! Take a few deep breaths and go roll yourself a fatty Cheesy

I feel your frustration as I've been in your position lots of times !! I'm going to list everything you need to do on your machine to fix following the ubuntu tutorial. Feel free to give it a go when you feel more like it Cheesy

Assuming you have completed the installer and have the grub error

1) Boot from linuxcoin
2)

Code:

mkdir myhdd
mount /dev/sda1 myhdd
mount -o bind /proc myhdd/proc
mount -o bind /sys myhdd/sys
mount -o bind /dev myhdd/dev
chroot myhdd
export DEBIAN_FRONTEND=noninteractive
apt-get update
apt-get purge grub2
apt-get install grub2
for i in $(ls /usr/sbin | grep grub); do paxctl -C /usr/sbin/$i; paxctl -cEr /usr/sbin/$i; done
update-grub
grub-install /dev/sda
exit
init 6

3) Hopefully enjoy linuxcoin

Lolz@ a fatty. Cheered me up, laughing.

Alright, It WORKS!!!!!!!!!!!!!!!!!! Grin

Now though, hate to say it, two problems.

Cannot save a leafpad to desktop.

Plugging in any SDHC or USB stick, I receive

Code:

error mounting: mount: unknown filesystem type "vfat"

How could I fix these two problems.

Thank you drgr33n for your precious time.

Gpod stuff Wink

Glad you got there in the end !! The desktop error was an unexpected bug Sad

Open up a root term and type

Code:

chmod 777 /home/user/Desktop

The second is very strange ? Can you plug in some flash media and post output of

Code:

modprobe vfat
dmesg

Hopefully I compiled vfat support into the kernel :/

pekv2

hero member

Activity: 770

Merit: 502

Quote from: drgr33n on August 20, 2011, 01:48:15 PM

Whoooo there boy !! Take a few deep breaths and go roll yourself a fatty Cheesy

I feel your frustration as I've been in your position lots of times !! I'm going to list everything you need to do on your machine to fix following the ubuntu tutorial. Feel free to give it a go when you feel more like it Cheesy

Assuming you have completed the installer and have the grub error

1) Boot from linuxcoin
2)

Code:

mkdir myhdd
mount /dev/sda1 myhdd
mount -o bind /proc myhdd/proc
mount -o bind /sys myhdd/sys
mount -o bind /dev myhdd/dev
chroot myhdd
export DEBIAN_FRONTEND=noninteractive
apt-get update
apt-get purge grub2
apt-get install grub2
for i in $(ls /usr/sbin | grep grub); do paxctl -C /usr/sbin/$i; paxctl -cEr /usr/sbin/$i; done
update-grub
grub-install /dev/sda
exit
init 6

3) Hopefully enjoy linuxcoin

Lolz@ a fatty. Cheered me up, laughing.

Alright, It WORKS!!!!!!!!!!!!!!!!!! Grin

Now though, hate to say it, two problems.

Cannot save a leafpad to desktop.

Plugging in any SDHC or USB stick, I receive

Code:

error mounting: mount: unknown filesystem type "vfat"

How could I fix these two problems.

Thank you drgr33n for your precious time.

BenD

newbie

Activity: 20

Merit: 0

Quote from: pekv2 on August 20, 2011, 11:55:13 AM

Created 10 gig ext4 partition & a 1 gig swap partition, ran linuxcoin installer, selected sda1, installed.

Tried to boot the hdd up and still received the following error.

Code:

GRUB loading.
Welcome to GRUB!

error: symbol not found: 'grub_divmod64_full'
Entering rescue mode...
grub rescue>

No one else in this thread has ran into this problem?

I can calm your mind. I am running into the same problem with an ultrafresh USB-installation (using Unetbootin), following the apt-get install procedure and running the linuxcoin_install tool.
I will try the manual procedure now.

Edit: I see now, it is not the exact same problem. My error is:

Quote

error: file not found.
Entering rescue mode...
grub rescue>

Edit: I used /dev/sda3 for linuxcoin. I purged my system (even sacrificing my dual-boot Windows) and created a partition for Linuxcoin on /dev/sda1, used linuxcoin_installer, rebooted and it worked. The manual method did cost me 2 hours again (chroot won't work) until I decided to send everything to hell I'd done before.

drgr33n

sr. member

Activity: 308

Merit: 251

Quote from: pekv2 on August 20, 2011, 12:57:54 PM

Quote from: drgr33n on August 20, 2011, 12:27:14 PM

You need to chroot the environment before running grub cmds. as root do the following while running from a live linuxcoin session.

Code:

mkdir myhdd
mount /dev/sda1 myhdd
mount -o bind /proc myhdd/proc
mount -o bind /sys myhdd/sys
mount -o bind /dev myhdd/dev
chroot myhdd

Now you can purge and reinstall grub. I would do the above then follow the ubuntu fix up guide. I don't know where this bug comes from I've tested the installer numerous times and always had success ?

Yea, thanks for the reply, I give up, there are the cmds u give me then there are a crap load of cmds from the other, it will just lead me to no where as i been trying since my first post in this thread. nothing but waste of time and power running a second pc trying. I'll just stick with my debian 6.0.2.1 install. Trying to mix ubuntu cmds with & fixes with linuxcoin cmds and mixes of grub version, my head is spinning.

I will send you a donation soon after I get my second gfx for giving your time trying to help me.

Whoooo there boy !! Take a few deep breaths and go roll yourself a fatty Cheesy

I feel your frustration as I've been in your position lots of times !! I'm going to list everything you need to do on your machine to fix following the ubuntu tutorial. Feel free to give it a go when you feel more like it Cheesy

Assuming you have completed the installer and have the grub error

1) Boot from linuxcoin
2)

Code:

mkdir myhdd
mount /dev/sda1 myhdd
mount -o bind /proc myhdd/proc
mount -o bind /sys myhdd/sys
mount -o bind /dev myhdd/dev
chroot myhdd
export DEBIAN_FRONTEND=noninteractive
apt-get update
apt-get purge grub2
apt-get install grub2
for i in $(ls /usr/sbin | grep grub); do paxctl -C /usr/sbin/$i; paxctl -cEr /usr/sbin/$i; done
update-grub
grub-install /dev/sda
exit
init 6

3) Hopefully enjoy linuxcoin

pekv2

hero member

Activity: 770

Merit: 502

Quote from: drgr33n on August 20, 2011, 12:27:14 PM

You need to chroot the environment before running grub cmds. as root do the following while running from a live linuxcoin session.

Code:

mkdir myhdd
mount /dev/sda1 myhdd
mount -o bind /proc myhdd/proc
mount -o bind /sys myhdd/sys
mount -o bind /dev myhdd/dev
chroot myhdd

Now you can purge and reinstall grub. I would do the above then follow the ubuntu fix up guide. I don't know where this bug comes from I've tested the installer numerous times and always had success ?

Yea, thanks for the reply, I give up, there are the cmds u give me then there are a crap load of cmds from the other, it will just lead me to no where as i been trying since my first post in this thread. nothing but waste of time and power running a second pc trying. I'll just stick with my debian 6.0.2.1 install. Trying to mix ubuntu cmds with & fixes with linuxcoin cmds and mixes of grub version, my head is spinning.

I will send you a donation soon after I get my second gfx for giving your time trying to help me.

drgr33n

sr. member

Activity: 308

Merit: 251

Quote from: pekv2 on August 20, 2011, 11:55:13 AM

Update to my problem.

I've wiped my SDHC card, reinstall linuxcoin final to it with latest unetbootin from this thread, wiped my hdd, booted up the USB linuxcoin final, updated & installed with following cmds

Code:

apt-get update
apt-get install linuxcoin-bugfix-020811 smartcoin bitcoin
apt-get install linuxcoin-installer
apt-get install zenity
apt-get install linuxcoin-bugfix-110811

Created 10 gig ext4 partition & a 1 gig swap partition, ran linuxcoin installer, selected sda1, installed.

Tried to boot the hdd up and still received the following error.

Code:

GRUB loading.
Welcome to GRUB!

error: symbol not found: 'grub_divmod64_full'
Entering rescue mode...
grub rescue>

No one else in this thread has ran into this problem?

Also, I tired that ubuntu guide purge reinstall grub, won't work from linuxcoin final usb[linuxcoin don't know what grug-update is or anything], I tried from my ubuntu live usb, i got the same error results but with a different type of name rather "grub_divmod64_full".

I've been pulling my hair out. Cheesy

You need to chroot the environment before running grub cmds. as root do the following while running from a live linuxcoin session.

Code:

mkdir myhdd
mount /dev/sda1 myhdd
mount -o bind /proc myhdd/proc
mount -o bind /sys myhdd/sys
mount -o bind /dev myhdd/dev
chroot myhdd

Now you can purge and reinstall grub. I would do the above then follow the ubuntu fix up guide. I don't know where this bug comes from I've tested the installer numerous times and always had success ?

pekv2

hero member

Activity: 770

Merit: 502

Update to my problem.

I've wiped my SDHC card, reinstall linuxcoin final to it with latest unetbootin from this thread, wiped my hdd, booted up the USB linuxcoin final, updated & installed with following cmds

Code:

apt-get update
apt-get install linuxcoin-bugfix-020811 smartcoin bitcoin
apt-get install linuxcoin-installer
apt-get install zenity
apt-get install linuxcoin-bugfix-110811

Created 10 gig ext4 partition & a 1 gig swap partition, ran linuxcoin installer, selected sda1, installed.

Tried to boot the hdd up and still received the following error.

Code:

GRUB loading.
Welcome to GRUB!

error: symbol not found: 'grub_divmod64_full'
Entering rescue mode...
grub rescue>

No one else in this thread has ran into this problem?

Also, I tired that ubuntu guide purge reinstall grub, won't work from linuxcoin final usb[linuxcoin don't know what grug-update is or anything], I tried from my ubuntu live usb, i got the same error results but with a different type of name rather "grub_divmod64_full".

I've been pulling my hair out. Cheesy

drgr33n

sr. member

Activity: 308

Merit: 251

Quote from: m0w3r on August 20, 2011, 10:17:22 AM

Thanks, donation sent

Thanks bud !! Been a while since I've got one lol !!

Here's a quick vid of a new plymouth boot screen Cheesy

http://www.youtube.com/watch?v=Wd-6YzcPcFw

m0w3r

full member

Activity: 131

Merit: 100

Thanks, donation sent

drgr33n

sr. member

Activity: 308

Merit: 251

Quote from: Red Emerald on August 19, 2011, 08:27:24 PM

I upgraded from linuxcoin .2a (started using it back in June) to .2.1b and my hashrate dropped from 700MH/s to 500MH/s when using the poclbm kernel with phoenix. However, I switched to using phatk and now I'm up to 728MH/s.

I'm getting depreciation warnings when I run phoenix miner. Did you bump the python version?

Code:

kernels/poclbm/__init__.py:392: DeprecationWarning: 'enqueue_read_buffer' has been deprecated in version 2011.1. Please use enqueue_copy() instead.

Great work! Expect a donation soon.

I wouldn't worry about the warning it's just a small code error with poclbm / phoenix. You should try the phatk2 kernel included with phoenix Wink

Red Emerald

hero member

Activity: 742

Merit: 500

I upgraded from linuxcoin .2a (started using it back in June) to .2.1b and my hashrate dropped from 700MH/s to 500MH/s when using the poclbm kernel with phoenix. However, I switched to using phatk and now I'm up to 728MH/s.

I'm getting depreciation warnings when I run phoenix miner. Did you bump the python version?

Code:

kernels/poclbm/__init__.py:392: DeprecationWarning: 'enqueue_read_buffer' has been deprecated in version 2011.1. Please use enqueue_copy() instead.

Great work! Expect a donation soon.

drgr33n

sr. member

Activity: 308

Merit: 251

Quote from: achillez on August 19, 2011, 05:59:08 PM

Quote from: drgr33n on August 19, 2011, 05:02:41 PM

Quote from: achillez on August 19, 2011, 04:38:42 PM

I'm still stuck on this stupid 3 card problem. If I put in 4 cards, no matter what, only 3 cards are able to be fully configured. When I run aticonfig it says it can't access the registers for the 4th card. This might be a dumb question, but do you need a crossfire cable when you plug in 6 cards??

Quote from: achillez on August 19, 2011, 02:17:09 AM

thank worked - thanks!

Now I have this weird problem where only 3 of my 6 cards are detected. Tried all power combos, slot combos etc... not sure what the problem is.

Quote from: gnar1ta$ on August 18, 2011, 11:04:28 PM

Quote from: achillez on August 18, 2011, 10:59:02 PM

Really liking Linuxcoin but I haven't figured out how to re-enable Remote Desktop on a reboot (w/out having to be at the machine). Is there a config script I need to update for this?

I believe it's in the wiki:
http://www.linuxcoin.co.uk/wiki/index.php/SettingupVNCremotely

Question for those better at linux than me - if I have a script like this:

Code:

chmod 777 /var/run/screen/
export DISPLAY=:0
xhost +
xauth merge /home/user/.Xauthority
smartcoin --silent

and I want to run it as sudo automatically on startup on a remote headless 0.2.1B rig, where would be a good place to put it?

Can you try installing this bugfix and rebooting.

Code:

apt-get update
apt-get install linuxcoin-bugfix_110811

It says:

root@linuxcoin:~# apt-get install linuxcoin-bugfix_110811
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package linuxcoin-bugfix_110811

sorry I put the wrong command again Cheesy

Duno what's up with me tonight !!

Code:

apt-get update
apt-get install linuxcoin-bugfix-110811

achillez

hero member

Activity: 874

Merit: 1000

Quote from: drgr33n on August 19, 2011, 05:02:41 PM

Quote from: achillez on August 19, 2011, 04:38:42 PM

I'm still stuck on this stupid 3 card problem. If I put in 4 cards, no matter what, only 3 cards are able to be fully configured. When I run aticonfig it says it can't access the registers for the 4th card. This might be a dumb question, but do you need a crossfire cable when you plug in 6 cards??

Quote from: achillez on August 19, 2011, 02:17:09 AM

thank worked - thanks!

Now I have this weird problem where only 3 of my 6 cards are detected. Tried all power combos, slot combos etc... not sure what the problem is.

Quote from: gnar1ta$ on August 18, 2011, 11:04:28 PM

Quote from: achillez on August 18, 2011, 10:59:02 PM

Really liking Linuxcoin but I haven't figured out how to re-enable Remote Desktop on a reboot (w/out having to be at the machine). Is there a config script I need to update for this?

I believe it's in the wiki:
http://www.linuxcoin.co.uk/wiki/index.php/SettingupVNCremotely

Question for those better at linux than me - if I have a script like this:

Code:

chmod 777 /var/run/screen/
export DISPLAY=:0
xhost +
xauth merge /home/user/.Xauthority
smartcoin --silent

and I want to run it as sudo automatically on startup on a remote headless 0.2.1B rig, where would be a good place to put it?

Can you try installing this bugfix and rebooting.

Code:

apt-get update
apt-get install linuxcoin-bugfix_110811

It says:

root@linuxcoin:~# apt-get install linuxcoin-bugfix_110811
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package linuxcoin-bugfix_110811

drgr33n

sr. member

Activity: 308

Merit: 251

Quote from: achillez on August 19, 2011, 04:38:42 PM

I'm still stuck on this stupid 3 card problem. If I put in 4 cards, no matter what, only 3 cards are able to be fully configured. When I run aticonfig it says it can't access the registers for the 4th card. This might be a dumb question, but do you need a crossfire cable when you plug in 6 cards??

Quote from: achillez on August 19, 2011, 02:17:09 AM

thank worked - thanks!

Now I have this weird problem where only 3 of my 6 cards are detected. Tried all power combos, slot combos etc... not sure what the problem is.

Quote from: gnar1ta$ on August 18, 2011, 11:04:28 PM

Quote from: achillez on August 18, 2011, 10:59:02 PM

Really liking Linuxcoin but I haven't figured out how to re-enable Remote Desktop on a reboot (w/out having to be at the machine). Is there a config script I need to update for this?

I believe it's in the wiki:
http://www.linuxcoin.co.uk/wiki/index.php/SettingupVNCremotely

Question for those better at linux than me - if I have a script like this:

Code:

chmod 777 /var/run/screen/
export DISPLAY=:0
xhost +
xauth merge /home/user/.Xauthority
smartcoin --silent

and I want to run it as sudo automatically on startup on a remote headless 0.2.1B rig, where would be a good place to put it?

Can you try installing this bugfix and rebooting.

Code:

apt-get update
apt-get install linuxcoin-bugfix_110811

Topic: LinuxCoin A lightweight Debian based OS with everything ready to go. - page 11. (Read 285137 times)