Pages:
Author

Topic: lolMiner-144 0.38 Preview, Equihash 144.5 for AMD & Nvidia, Linux & Windows - page 6. (Read 9473 times)

newbie
Activity: 3
Merit: 0
Unfortunately Vega 56 still does not work for me with the new kernel using the 18.6.1 driver under Windows 10, even if I renamed gfx901.bin to gfx900.bin

-------------------------------------------------
          Welcome to lolMiner-144.5 0.38
                 Public preview

   This software is only meant for pool mining
       with the Equihash 144.5 algorithm

For usage instructions add -h to the commandline.
          Made by Lolliedieb, June 2018
-------------------------------------------------
lolMiner is configured to mine BitcoinZ(BTCZ), Equihash 144.5
Auto selecting platform with id 0: AMD Accelerated Parallel Processing
Auto selecting all GPU in platform.
Using device with id 0 (Radeon RX Vega)
Setup Miner...
ERROR: Kernel kernels/144_5/gfx900.bin can not be build for your device 0(gfx900)
-11
Build Status: -2
Build Options:
Build Log: Error: AMD HSA Code Object loading failed.

Warning: Your device with id 0 is currently not supported by lolMiner-144.5
Error: lolMiner does not support any of the detected / selected devices algorithms on the selected algorithm.
member
Activity: 433
Merit: 48
Some pools unfortunately send an accepted : true message although they rejected a share.
What you can try is suprnova pool - as far as I know that one is accurate in its response message.

Still it seems that R280 and HD7000 cards produse invalid shares. Thats not good and I do not know yet why, investigating it currently.
What confuses me is that the kernels were all build from same source and same driver but some do valid and some invalid result what is confusing as the code os very deterministic. (At least long as you set the "COIN" : "XYZ" section right the code should work... hmm)

I will try to find a better way to give kernels to you...

I have
amd 7970
amd fury x
amd vega rx 64

If I run the miner without devices configuration is tell me the device 2 is not supported ( I suppose the 7970 )  .
If I set "DEVICES":[0,1]  it run on the 7970 and on the vega ! with about 100 sol !
If I set "DEVICES":[1,2] the miner tell me device 2 is not supported .

It seem there is a different device numbering  in the cfg and in the running process.

How can I solve the problem?


Hu... the order changes? Thats odd. Will look into this. 100 is a bit too high - I assume some binary kernel problem again.
Its a pitty that there is no good IL for AMD kernels... hnmm
newbie
Activity: 67
Merit: 0
I have
amd 7970
amd fury x
amd vega rx 64

If I run the miner without devices configuration is tell me the device 2 is not supported ( I suppose the 7970 )  .
If I set "DEVICES":[0,1]  it run on the 7970 and on the vega ! with about 100 sol !
If I set "DEVICES":[1,2] the miner tell me device 2 is not supported .

It seem there is a different device numbering  in the cfg and in the running process.

How can I solve the problem?

member
Activity: 151
Merit: 10
the program stops. Windows 10 LTSB, Blockchain Crimson driver. 6 AMD asus 570/580 and 4 AMD Powercolor 570.

All gpu crashes!
newbie
Activity: 180
Merit: 0
miner restarted went to  Diff: -5734 poolside lol
newbie
Activity: 180
Merit: 0
One thing i notice is the auto diff on poolside is always in the minus right now thats my difficulty Diff: -340 on ragnorpool im just going through all of them to see if any change but all are having the same result
legendary
Activity: 1852
Merit: 2841
All good things to those who wait
Hmm, the whole day my 580 had accepted shares and stats on the pool MPH were correct. For the last hours (4-5) however, the pool shows 0 sols and the miner is turned off in the workers page. Really strange, since I see only accepted shares.
newbie
Activity: 9
Merit: 0
newbie
Activity: 180
Merit: 0
tahiti (280x&7970) works perfectly with 10-12sol per card.
390 require a lot of virtual memory - 38Gb on 6 card.
why there is no overclocking effect?
Don't you have invalid solutions? Does the pool stats correspond to your hashrate? And last, why only 10 sols? My tahiti is at least 18 sols, but with invalid solutions. Not a single accepted share. My cards are not overclocked, but undervolted with bios mod. It seems that most of the people have the same isuue.
all shares accepted, hashrate on pool is correct + - , (1100/1500 on 1050mV all with StilitBios win8.1&win10 15.12drivers).
I do not understand how tahiti can give such a hash. My 290/390 give 14-17sol/s on this miner.
390 too all shares accept hashrate 14-17, but what with overclock(1150/1400) what without (1050/1600) hashrate does not change.
p.s. if you see message opencl memory errors and reboot miner - increase the amount of virtual memory.
p.p.s. if you see stop your device (-4) run the second copy of miner in another window, but only for the card with which the first miner refuses to work. For example "DEVICES" : [1]

im getting between 32-39 sols on my two 7970s

New job received: fdd7
Average speed (5s): 15.5502 sol/s | 18.5407 sol/s Total: 34.0909 sol/s
---------------------------------------------
Average speed (60s): 15.1808 sol/s | 16.5806 sol/s Total: 31.7614 sol/s
---------------------------------------------
Average speed (5s): 15.7811 sol/s | 17.3791 sol/s Total: 33.1602 sol/s
Average speed (5s): 13.7972 sol/s | 15.7968 sol/s Total: 29.5941 sol/s
Average speed (5s): 17.3896 sol/s | 15.3908 sol/s Total: 32.7803 sol/s
Average speed (5s): 16.3803 sol/s | 20.7751 sol/s Total: 37.1554 sol/s
Submitting share
Share accepted
Average speed (5s): 17.1486 sol/s | 16.9492 sol/s Total: 34.0977 sol/s
Average speed (5s): 15.5751 sol/s | 15.9744 sol/s Total: 31.5495 sol/s
Average speed (5s): 17.5544 sol/s | 18.7512 sol/s Total: 36.3056 sol/s
Average speed (5s): 13.5756 sol/s | 18.1673 sol/s Total: 31.7429 sol/s
Average speed (5s): 17.9677 sol/s | 14.5738 sol/s Total: 32.5414 sol/s
Average speed (5s): 18.3596 sol/s | 15.5658 sol/s Total: 33.9254 sol/s
New job received: fdd8
Average speed (5s): 16.5867 sol/s | 15.5875 sol/s Total: 32.1743 sol/s

but main problem is its not registering on any pools what so ever tried a lot know
seems to be running stable after deleting all the other kernals but still no pool progress

The Big question is where are all my accepted shares going as they are clearly not making it to the pool. is the dev fee set up correct or are all our shares going to the dev lol

Connecting to pool...
Connected to mine-btcz-euro.equipool.1ds.us:50061
Subscribed to stratum server
New target received: 0064000000000000000000000000000000000000000000000000000000000000
New job received: d735
Authorized worker: t1enCvVEbgszYs97KUKGZ3yGuzriRxJUhMG
Start Mining...
Average speed (5s): 16.5603 sol/s | 14.9641 sol/s Total: 31.5243 sol/s
Average speed (5s): 16.5669 sol/s | 15.5689 sol/s Total: 32.1357 sol/s
Average speed (5s): 17.1931 sol/s | 13.5946 sol/s Total: 30.7877 sol/s
Average speed (5s): 18.345 sol/s | 18.7438 sol/s Total: 37.0887 sol/s
Average speed (5s): 15.7496 sol/s | 17.7432 sol/s Total: 33.4928 sol/s
New job received: d736
Average speed (5s): 14.5854 sol/s | 12.3876 sol/s Total: 26.973 sol/s
Average speed (5s): 15.7937 sol/s | 19.992 sol/s Total: 35.7857 sol/s
Average speed (5s): 18.7812 sol/s | 16.983 sol/s Total: 35.7642 sol/s
Average speed (5s): 17.5789 sol/s | 17.5789 sol/s Total: 35.1578 sol/s
Average speed (5s): 19.369 sol/s | 13.5783 sol/s Total: 32.9473 sol/s

Feel free to check my equipool stats as you can see i am connected shares submitting and accepted just no pool progress what so ever
newbie
Activity: 9
Merit: 0

I get invalid solutions also on 280x and pool shows miner offline.

Hi there, may you share what driver you use? I will try to check why that one produces fault shares with the kernel Smiley

how to fix low difficulty share?

Single low diff shares can occur , but should be minority. If all are low diff shares some part of the miner does not work properly with your driver.


At all who have trouble with invalid shares:
Please share OS & Driver version. It seems my binary Kernels cause Problems on other then the blockchain drivers (whete they were compiled)



By the way: did anyone test with Nvidia how close to ewbf we are?
Using windows 10 with 22.19.659.0 driver version. any suggestion which drivers i should use?
member
Activity: 433
Merit: 48

I get invalid solutions also on 280x and pool shows miner offline.

Hi there, may you share what driver you use? I will try to check why that one produces fault shares with the kernel Smiley

how to fix low difficulty share?

Single low diff shares can occur , but should be minority. If all are low diff shares some part of the miner does not work properly with your driver.


At all who have trouble with invalid shares:
Please share OS & Driver version. It seems my binary Kernels cause Problems on other then the blockchain drivers (whete they were compiled)



By the way: did anyone test with Nvidia how close to ewbf we are?
newbie
Activity: 9
Merit: 0
Code:
-------------------------------------------------
          Welcome to lolMiner-144.5 0.38
                 Public preview

   This software is only meant for pool mining
       with the Equihash 144.5 algorithm

For usage instructions add -h to the commandline.
          Made by Lolliedieb, June 2018
-------------------------------------------------
lolMiner is configured to mine Bitcoin Gold(BTG), Equihash 144.5
Auto selecting platform with id 0: AMD Accelerated Parallel Processing
Auto selecting all GPU in platform.
Using device with id 0 (AMD Radeon R9 200 Series)
Using device with id 1 (AMD Radeon R9 200 Series)
Using device with id 2 (AMD Radeon R9 200 Series)
Setup Miner...
Connecting to pool...
Connected to btg-eu.coinblockers.com:5555
Subscribed to stratum server
New target received: 0020000000000000000000000000000000000000000000000000000000000000
New job received: 68e
Authorized worker: GSYYfCLrMs5W1aUpKJxveKXT1YVhh8qK4A.lolMiner
Start Mining...
New job received: 68f
Submitting share
invalid solution
Warning: Share not accepted
Average speed (5s): 15.9521 sol/s | 14.9551 sol/s | 16.9492 sol/s Total: 47.8564 sol/s
Average speed (5s): 17.1486 sol/s | 15.1545 sol/s | 15.5533 sol/s Total: 47.8564 sol/s
Submitting share
invalid solution
Warning: Share not accepted
Submitting share
invalid solution
Warning: Share not accepted
Average speed (5s): 14.7557 sol/s | 18.7438 sol/s | 17.1486 sol/s Total: 50.6481 sol/s
I'm getting this and my json file is like this. running 3x R9 280x 3GB. anyone has a solution?
Code:
{
"DEFAULTS" : {
"PLATFORM"      : "AUTO",
"DEVICES"      : "AUTO"
},

"EXAMPLE2" :
{
"COIN" : "BTCZ",
"POOLS" : [
{"POOL" : "mine-btcz-euro.equipool.1ds.us",
"PORT" : "50061",
"USER" : "t1dbQvbohSUAGE6dZpUYru7e18SCNVipVXY.lolMiner",
"PASS" : "x"}
]
},

"EXAMPLE1" :
{
"COIN" : "BTG",
"POOLS" : [
{"POOL" : "btg-eu.coinblockers.com",
"PORT" : "5555",
"USER" : "GSYYfCLrMs5W1aUpKJxveKXT1YVhh8qK4A.lolMiner",
"PASS" : "x"},
{"POOL" : "btg.suprnova.cc",
"PORT" : "8866",
"USER" : "Lolliedieb.BitcoinGold",
"PASS" : "x"}
]
}
}
newbie
Activity: 8
Merit: 0
tahiti (280x&7970) works perfectly with 10-12sol per card.
390 require a lot of virtual memory - 38Gb on 6 card.
why there is no overclocking effect?
Don't you have invalid solutions? Does the pool stats correspond to your hashrate? And last, why only 10 sols? My tahiti is at least 18 sols, but with invalid solutions. Not a single accepted share. My cards are not overclocked, but undervolted with bios mod. It seems that most of the people have the same isuue.
all shares accepted, hashrate on pool is correct + - , (1100/1500 on 1050mV all with StilitBios win8.1&win10 15.12drivers).
I do not understand how tahiti can give such a hash. My 290/390 give 14-17sol/s on this miner.
390 too all shares accept hashrate 14-17, but what with overclock(1150/1400) what without (1050/1600) hashrate does not change.
p.s. if you see message opencl memory errors and reboot miner - increase the amount of virtual memory.
p.p.s. if you see stop your device (-4) run the second copy of miner in another window, but only for the card with which the first miner refuses to work. For example "DEVICES" : [1]
legendary
Activity: 1852
Merit: 2841
All good things to those who wait
tahiti (280x&7970) works perfectly with 10-12sol per card.
390 require a lot of virtual memory - 38Gb on 6 card.
why there is no overclocking effect?
Don't you have invalid solutions? Does the pool stats correspond to your hashrate? And last, why only 10 sols? My tahiti is at least 18 sols, but with invalid solutions. Not a single accepted share. My cards are not overclocked, but undervolted with bios mod. It seems that most of the people have the same isuue.
newbie
Activity: 29
Merit: 0
Works well in one windows pc.
In other windows pc with 3 GPU the miner stop and close with a OpenCL.dll error.

Can you put a intensity option? The GPU is al 100% and can work with pc while mininig...
member
Activity: 571
Merit: 18
Code:
Start Mining...
Average speed (5s): 9.19632 sol/s
Average speed (5s): 11.5977 sol/s
Average speed (5s): 7.9968 sol/s
Submitting share
low difficulty share of 0.062499046325683594
Average speed (5s): 9.998 sol/s
Average speed (5s): 8.9982 sol/s
Average speed (5s): 11.3977 sol/s
Average speed (5s): 10.5958 sol/s
Average speed (5s): 9.59808 sol/s
Average speed (5s): 16.1968 sol/s
Average speed (5s): 8.19836 sol/s
how to fix low difficulty share?
Also have that problem on 2miners.com pool, we need new miner, or fix for all 3GB cards

i think u guys are using the wrong COIN in your config json..
If u go mine BTCZ u must also enter BTCZ in that config..
newbie
Activity: 8
Merit: 0
tahiti (280x&7970) works perfectly with 10-12sol per card.
390 require a lot of virtual memory - 38Gb on 6 card.
why there is no overclocking effect?
newbie
Activity: 15
Merit: 0
There is a problem with failover pools, after 5 attempt it goes to second pool correctly but miner restart saying Device 0 is stuck, so the loop continues and never mine, if i delete the failover it works, so my thoughts are while trying to connect to failed pools devices are not hashing so miner after some time think device is stuck and restart...
newbie
Activity: 9
Merit: 0
Code:
Start Mining...
Average speed (5s): 9.19632 sol/s
Average speed (5s): 11.5977 sol/s
Average speed (5s): 7.9968 sol/s
Submitting share
low difficulty share of 0.062499046325683594
Average speed (5s): 9.998 sol/s
Average speed (5s): 8.9982 sol/s
Average speed (5s): 11.3977 sol/s
Average speed (5s): 10.5958 sol/s
Average speed (5s): 9.59808 sol/s
Average speed (5s): 16.1968 sol/s
Average speed (5s): 8.19836 sol/s
how to fix low difficulty share?
Also have that problem on 2miners.com pool, we need new miner, or fix for all 3GB cards
newbie
Activity: 91
Merit: 0
Code:
Start Mining...
Average speed (5s): 9.19632 sol/s
Average speed (5s): 11.5977 sol/s
Average speed (5s): 7.9968 sol/s
Submitting share
low difficulty share of 0.062499046325683594
Average speed (5s): 9.998 sol/s
Average speed (5s): 8.9982 sol/s
Average speed (5s): 11.3977 sol/s
Average speed (5s): 10.5958 sol/s
Average speed (5s): 9.59808 sol/s
Average speed (5s): 16.1968 sol/s
Average speed (5s): 8.19836 sol/s
how to fix low difficulty share?
Pages:
Jump to: