Topic: LUXCoin—New PHI2 PoW/PoS Hybrid—SC—SegWit—PrivateSend—PoS Web Wallet—LuxGate - page 154. (Read 130263 times)
January 10, 2018, 10:54:10 PM
Cryptopia opened new users registration https://twitter.com/Cryptopia_NZ/status/951278948494667777
January 10, 2018, 10:51:17 PM
would anybody know the % rate for POS on this coin and minimum recommended amount for hitting weekly stakes?
You can have a stake per day with 1000 Lux in wallet, do your count for weekly stake 
Who created that binary?
Well I just installed the windows wallet in a windows 10 vm on the same pc and it seems to be syncing fine.
Sometimes it's really nice having dual Xeon's and lots of ram as my main pc.
Its offical pre-build from the team with fixed bug when wallet cant sync after compiling on linux.Well I just installed the windows wallet in a windows 10 vm on the same pc and it seems to be syncing fine.
Sometimes it's really nice having dual Xeon's and lots of ram as my main pc.
Anyway glad your wallet syncing now, keep in mind that new wallet release planned at 15th Jan https://luxcore.io/roadmap
Thanks!! Will give it a try.
January 10, 2018, 10:27:50 PM
would anybody know the % rate for POS on this coin and minimum recommended amount for hitting weekly stakes?
I bought 200 LUX on 22nd november and until today (less than 50 days) I staked 25 LUX. Which is pretty nice in my opinion January 10, 2018, 09:30:12 PM
would anybody know the % rate for POS on this coin and minimum recommended amount for hitting weekly stakes?
You can have a stake per day with 1000 Lux in wallet, do your count for weekly stake Who created that binary?
Well I just installed the windows wallet in a windows 10 vm on the same pc and it seems to be syncing fine.
Sometimes it's really nice having dual Xeon's and lots of ram as my main pc.
Its offical pre-build from the team with fixed bug when wallet cant sync after compiling on linux.Well I just installed the windows wallet in a windows 10 vm on the same pc and it seems to be syncing fine.
Sometimes it's really nice having dual Xeon's and lots of ram as my main pc.
Anyway glad your wallet syncing now, keep in mind that new wallet release planned at 15th Jan https://luxcore.io/roadmap
January 10, 2018, 08:44:01 PM
When I run ./luxd it still chokes on block 1154
When I run ./luxd -loadblock=bootstrap.dat it still stops on 1154.
Try this binaries https://www.dropbox.com/s/klcgz39yu5qu5fk/luxd.gz?dl=0When I run ./luxd -loadblock=bootstrap.dat it still stops on 1154.
Code:
nStakeModifierNew: 10309499629047879239
**********************************************************
----------------------------------------
CheckStakeKernelHash: 1154
bnTarget: 0000000029f81300000000000000000000000000000000000000000000000000
targetProofOfStake: 00fa27b8ad58a400000000000000000000000000000000000000000000000000
nStakeModifier: 10309499629047879239
nStakeModifierV@: 5931070726184719672
nStakeModifierHeight: 1154
nStakeModifierTime: 1507789202
hashProofOfStake: a1d4bc57342665a93050b62410129239a61f3d49f46562364db29b16aff0be69
**********************************************************
----------------------------------------
CheckStakeKernelHash: 1154
bnTarget: 0000000029f81300000000000000000000000000000000000000000000000000
targetProofOfStake: 00fa27b8ad58a400000000000000000000000000000000000000000000000000
nStakeModifier: 10309499629047879239
nStakeModifierV@: 5931070726184719672
nStakeModifierHeight: 1154
nStakeModifierTime: 1507789202
hashProofOfStake: a1d4bc57342665a93050b62410129239a61f3d49f46562364db29b16aff0be69
If you still be getting such issue please join Lux discord https://discord.gg/X43CA3f, will help you there.
Who created that binary?
Well I just installed the windows wallet in a windows 10 vm on the same pc and it seems to be syncing fine.
Sometimes it's really nice having dual Xeon's and lots of ram as my main pc.
January 10, 2018, 04:13:21 PM
profit is when you sell your coins not when you are mining it. don't worry about loosing my profits take care about your own.
i don't worry even for a second about your profit, lol
where i said that i worry? i am glad that you lose it makes me feel good.
keep mining if you even don't want understand simple things and make some easy calculation and tests
January 10, 2018, 04:04:23 PM
I am mining on altminer or yiimp and I don't complain. those 2 guys they know what are they doing.
lol, if you mining at altminer and don't complain i have nothing to say
probably you lose 50% of profit
profit is when you sell your coins not when you are mining it. don't worry about loosing my profits take care about your own.
January 10, 2018, 03:55:23 PM
I got paid in LUX some time ago at HashRefinery. No problems there.
LUX/EUR got a boost today. Do you think it will do even better soon?
LUX/EUR got a boost today. Do you think it will do even better soon?
January 10, 2018, 03:34:03 PM
would anybody know the % rate for POS on this coin and minimum recommended amount for hitting weekly stakes?
January 10, 2018, 12:01:29 PM
Which are those unstable pools? I am mining this coin since 2 months ago and pools usually go fine. You maybe want to people stop mining luxcoin.
yiimp, altminer, bsod, is this enough?
if you will just make a check and see how many lux you get for 24 hours and convert it to BTC then for example make a 24H check with **K and see how many BTC you get you will be surprise
and cry because since 2 month you mining lux instead of mining **k and just buy lux this way you will get twice more coins
but whattomine will show you that you will get a lot more with mining lux
and i don't care will people mine this or not i just asking why there is no "Release stable pool for mining" in lux road map
I checked this and you are right , I made the average for 24h and the total is less than the one showed in the pool or whattomine.
January 10, 2018, 07:59:27 AM
Most likely sp-mod is still faster, but not free.
Our target was to make the gap smaller between free and paid miners as not everyone can afford a paid miner.
just tested. yes it faster than ccminer 2.2.4 and slower than SP-MOD. in the middle of them. not bad anyway.
January 10, 2018, 06:58:56 AM
And to complainers about pools, yiimp is working fine and stable. My payouts are good to. Though if only Suprnova came i would switch instantly as it is my preferred pool
your fine and stable pool just get freezed and restarted a half a hour ago again
[2018-01-10 15:13:39] Stratum connection interrupted
[2018-01-10 15:13:48] Stratum authentication failed
[2018-01-10 15:13:48] ...retry after 30 seconds
[2018-01-10 15:14:26] Stratum authentication failed
[2018-01-10 15:14:26] ...retry after 30 seconds
[2018-01-10 15:15:05] Stratum authentication failed
[2018-01-10 15:15:05] ...retry after 30 seconds
why when lemmings see that payouts are out from pool without delay think that everything is good?
January 10, 2018, 06:54:34 AM
- snip -
very interesting
i will test it and compare with SP-MOD
very interesting
i will test it and compare with SP-MOD
Most likely sp-mod is still faster, but not free.
Our target was to make the gap smaller between free and paid miners as not everyone can afford a paid miner.
- snip -
Thank you, il try to test it and get back with the results A 8% increase would be a really nice boost just to switch program.
Thank you, il try to test it and get back with the results
A 8% increase would be a really nice boost just to switch program.You should see some increase for sure.
I say it's better than nothing, especially if it costs you nothing.
Regards.
January 10, 2018, 06:49:29 AM
Some test results
Code:
1050 Ti
8.3 MH/s at 75% TDP / +150 core / -502 mem @ 56 watts
1060 3GB
12.5 MH/s at 75% TDP / +150 core / -502 mem @ 90 watts
1070
19.8 MH/s at 85% TDP / +130 core / -460 mem @ 129 watts
1070 Ti
24.4 MH/s at 85% TDP / +180 core / -400 mem @ 153 watts
1080 Ti
33.8 MH/s at 80% TDP / +75 core / -200 mem @ 200 watts
8.3 MH/s at 75% TDP / +150 core / -502 mem @ 56 watts
1060 3GB
12.5 MH/s at 75% TDP / +150 core / -502 mem @ 90 watts
1070
19.8 MH/s at 85% TDP / +130 core / -460 mem @ 129 watts
1070 Ti
24.4 MH/s at 85% TDP / +180 core / -400 mem @ 153 watts
1080 Ti
33.8 MH/s at 80% TDP / +75 core / -200 mem @ 200 watts
ccminer/phi-1.0 is free and open source.
You can build it from source (use CUDA 8 and x86 for best results) or use the provided Windows binary.
Thank you, il try to test it and get back with the results
A 8% increase would be a really nice boost just to switch program.And to complainers about pools, yiimp is working fine and stable. My payouts are good to. Though if only Suprnova came i would switch instantly as it is my preferred pool
January 10, 2018, 05:55:58 AM
https://vgy.me/7dLMI4.jpg
Some test results
ccminer/phi-1.0 is free and open source.
You can build it from source (use CUDA 8 and x86 for best results) or use the provided Windows binary.
Some test results
Code:
1050 Ti
8.3 MH/s at 75% TDP / +150 core / -502 mem @ 56 watts
1060 3GB
12.5 MH/s at 75% TDP / +150 core / -502 mem @ 90 watts
1070
19.8 MH/s at 85% TDP / +130 core / -460 mem @ 129 watts
1070 Ti
24.4 MH/s at 85% TDP / +180 core / -400 mem @ 153 watts
1080 Ti
33.8 MH/s at 80% TDP / +75 core / -200 mem @ 200 watts
8.3 MH/s at 75% TDP / +150 core / -502 mem @ 56 watts
1060 3GB
12.5 MH/s at 75% TDP / +150 core / -502 mem @ 90 watts
1070
19.8 MH/s at 85% TDP / +130 core / -460 mem @ 129 watts
1070 Ti
24.4 MH/s at 85% TDP / +180 core / -400 mem @ 153 watts
1080 Ti
33.8 MH/s at 80% TDP / +75 core / -200 mem @ 200 watts
ccminer/phi-1.0 is free and open source.
You can build it from source (use CUDA 8 and x86 for best results) or use the provided Windows binary.
very interesting
i will test it and compare with SP-MOD
January 10, 2018, 04:42:46 AM
Some test results
Code:
1050 Ti
8.3 MH/s at 75% TDP / +150 core / -502 mem @ 56 watts
1060 3GB
12.5 MH/s at 75% TDP / +150 core / -502 mem @ 90 watts
1070
19.8 MH/s at 85% TDP / +130 core / -460 mem @ 129 watts
1070 Ti
24.4 MH/s at 85% TDP / +180 core / -400 mem @ 153 watts
1080 Ti
33.8 MH/s at 80% TDP / +75 core / -200 mem @ 200 watts
8.3 MH/s at 75% TDP / +150 core / -502 mem @ 56 watts
1060 3GB
12.5 MH/s at 75% TDP / +150 core / -502 mem @ 90 watts
1070
19.8 MH/s at 85% TDP / +130 core / -460 mem @ 129 watts
1070 Ti
24.4 MH/s at 85% TDP / +180 core / -400 mem @ 153 watts
1080 Ti
33.8 MH/s at 80% TDP / +75 core / -200 mem @ 200 watts
ccminer/phi-1.0 is free and open source.
You can build it from source (use CUDA 8 and x86 for best results) or use the provided Windows binary.
January 10, 2018, 03:59:31 AM
I am mining on altminer or yiimp and I don't complain. those 2 guys they know what are they doing.
lol, if you mining at altminer and don't complain i have nothing to say
probably you lose 50% of profit
January 10, 2018, 03:49:07 AM
Which are those unstable pools? I am mining this coin since 2 months ago and pools usually go fine. You maybe want to people stop mining luxcoin.
yiimp, altminer, bsod, is this enough?
if you will just make a check and see how many lux you get for 24 hours and convert it to BTC then for example make a 24H check with **K and see how many BTC you get you will be surprise
and cry because since 2 month you mining lux instead of mining **k and just buy lux this way you will get twice more coins
but whattomine will show you that you will get a lot more with mining lux
and i don't care will people mine this or not i just asking why there is no "Release stable pool for mining" in lux road map
January 10, 2018, 03:37:12 AM
which altcoin is more profitable than luxcoin ?
i trying to say that pools very unstable and in this reason even zec more profitable
I am mining on altminer or yiimp and I don't complain. those 2 guys they know what are they doing.
January 10, 2018, 12:19:05 AM
When I run ./luxd it still chokes on block 1154
When I run ./luxd -loadblock=bootstrap.dat it still stops on 1154.
Try this binaries https://www.dropbox.com/s/klcgz39yu5qu5fk/luxd.gz?dl=0When I run ./luxd -loadblock=bootstrap.dat it still stops on 1154.
Code:
nStakeModifierNew: 10309499629047879239
**********************************************************
----------------------------------------
CheckStakeKernelHash: 1154
bnTarget: 0000000029f81300000000000000000000000000000000000000000000000000
targetProofOfStake: 00fa27b8ad58a400000000000000000000000000000000000000000000000000
nStakeModifier: 10309499629047879239
nStakeModifierV@: 5931070726184719672
nStakeModifierHeight: 1154
nStakeModifierTime: 1507789202
hashProofOfStake: a1d4bc57342665a93050b62410129239a61f3d49f46562364db29b16aff0be69
**********************************************************
----------------------------------------
CheckStakeKernelHash: 1154
bnTarget: 0000000029f81300000000000000000000000000000000000000000000000000
targetProofOfStake: 00fa27b8ad58a400000000000000000000000000000000000000000000000000
nStakeModifier: 10309499629047879239
nStakeModifierV@: 5931070726184719672
nStakeModifierHeight: 1154
nStakeModifierTime: 1507789202
hashProofOfStake: a1d4bc57342665a93050b62410129239a61f3d49f46562364db29b16aff0be69
If you still be getting such issue please join Lux discord https://discord.gg/X43CA3f, will help you there.
Jump to: