Pages:
Author

Topic: GTX 1060 discussion thread - page 42. (Read 289437 times)

full member
Activity: 194
Merit: 100
September 30, 2017, 11:46:50 AM
Hi, any tip for Gainward  1060 6gb gddr5 Phoenix GS ?
My max is for now 1950/4350/70%  (+100/+550/70) with only 18,7 HS
newbie
Activity: 7
Merit: 0
September 29, 2017, 07:13:12 PM
Have 4 3gb 1060's at 70% tdp +180 / +380 and they each get 18mh/s for eth
equihash, they get 270-290
newbie
Activity: 15
Merit: 0
September 29, 2017, 05:43:12 PM

My 5  GTX 1060's 3gb  - give 2600 H/S  for XMR   

core  +120
mem +800

power limit 60%


Here is my rig before i added the 5th card


https://www.youtube.com/watch?v=VezGhvmolaU&t=49s
member
Activity: 88
Merit: 10
September 29, 2017, 04:20:46 PM
Gigabyte GTX 1060 3Gb stock 280 H/s
Gigabyte GTX 1060 6Gb stock 310 H/s
MSI GTX 1070 Founders 8Gb stock 430 H/s
Asus strix 1050ti 4Gb stock 180 H/s
newbie
Activity: 37
Merit: 0
September 29, 2017, 02:54:11 PM
In case of ETH mining - this post shows 20Mh/s consuming only 112W for all system (42W for GPU) for GTX 1060 with 3GB GDDR5.
newbie
Activity: 35
Merit: 0
September 29, 2017, 02:28:51 PM
Getting around 300 h/s for zcash.
newbie
Activity: 38
Merit: 0
September 29, 2017, 01:58:52 PM
I'm thinking about grabbing a used card to mine XMR or whatever

Do you think it's still a good idea to invest in this card?

It's good for equihash rather than the cryptoNight. So Zcash better than xmr with these cards.
full member
Activity: 246
Merit: 100
September 29, 2017, 11:30:00 AM
I'm thinking about grabbing a used card to mine XMR or whatever

Do you think it's still a good idea to invest in this card?
full member
Activity: 378
Merit: 104
nvOC forever
September 29, 2017, 11:27:29 AM
Hi gyus,
Can i have some advices please?
I have rig with 8 x 1060 msi gtx gaming 1060 and mining Zec on it
Without msi afterburner i got around 275 Sos/s per card.
With Core + 160, Memory + 170 i got 295-300 Sol/s per card.
If i up Core a bit more miner terminating with errors.

Many posts in this thread says to do like core -80 and memory + 1000 but when i configure like it my system lagging hard and miner not working at all.
Is this advices only for ETH mining or i misunderstooding something?
(also i don't understand how to overlock cards, is overlocking -> upgrading card voltage?)

Check this website, I've collected many OC settings for different card.

krypto-mining.blogspot.co.uk

Thank-you this is a good collection of settings and hash rates. Hopefully you will keep it updated as it looks clearer than other ones I have seen. I was nearly tearing out my hair looking at different cards.

Sure i will, Thanks for your comments Smiley
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
September 28, 2017, 05:12:17 PM
Hi guys, how are yall putting your 1060s to good use now that the Eth profitibality has decreased?

eth? 95% of people with gtx 1060 or 70 have moved to equihash already since the dif bombs.
newbie
Activity: 70
Merit: 0
September 28, 2017, 05:03:08 PM
Pailt jetstream 1060 6 gb.
24mh / eth only / claymore
330 sol / zcash / ewbf
full member
Activity: 462
Merit: 115
September 28, 2017, 04:01:37 PM
Anyone mining equihash with PNY GTX 1060 3gb? 

I wasn't getting good results mining that algo.  Wondering if there is a fix.  If so, please share the afterburner settings.
sr. member
Activity: 711
Merit: 250
September 28, 2017, 02:28:06 PM
So I finally received my case... But noticed that my TB250-btc motherboard has some problems. This is the third board I've ordered, but I can't make it detect either usb ports, or periphericals like hard drive. It has power, but no date, I made some researchs, but gosh, I think it is a southbridge physical problem or so.

Anyway, I've ordered another Biostar tb250-btc ( Great motherboard by the way ) so that I could install my GPUs and then after try to find a solution for the defective one while the mining is started.

Can't wait to share with you those specs with the new EVGA 1060 card.

If any of you know how to fix a southbridge mobo problem, or power no data, would greatly appreciate, but mostly sure it is a physical issue and can't be repaired.
sr. member
Activity: 756
Merit: 250
September 28, 2017, 12:57:03 PM
Hi guys, how are yall putting your 1060s to good use now that the Eth profitibality has decreased?


they now are very good to mine zcash!!!!
newbie
Activity: 14
Merit: 0
September 28, 2017, 09:01:26 AM
Hi guys, how are yall putting your 1060s to good use now that the Eth profitibality has decreased?
sr. member
Activity: 504
Merit: 251
★777Coin.com★ Fun BTC Casino!
September 28, 2017, 08:51:11 AM
Hi gyus,
Can i have some advices please?
I have rig with 8 x 1060 msi gtx gaming 1060 and mining Zec on it
Without msi afterburner i got around 275 Sos/s per card.
With Core + 160, Memory + 170 i got 295-300 Sol/s per card.
If i up Core a bit more miner terminating with errors.

Many posts in this thread says to do like core -80 and memory + 1000 but when i configure like it my system lagging hard and miner not working at all.
Is this advices only for ETH mining or i misunderstooding something?
(also i don't understand how to overlock cards, is overlocking -> upgrading card voltage?)

Check this website, I've collected many OC settings for different card.

krypto-mining.blogspot.co.uk

Thank-you this is a good collection of settings and hash rates. Hopefully you will keep it updated as it looks clearer than other ones I have seen. I was nearly tearing out my hair looking at different cards.
member
Activity: 69
Merit: 10
September 28, 2017, 06:06:54 AM
Thank you)
full member
Activity: 378
Merit: 104
nvOC forever
September 28, 2017, 05:42:13 AM
Hi gyus,
Can i have some advices please?
I have rig with 8 x 1060 msi gtx gaming 1060 and mining Zec on it
Without msi afterburner i got around 275 Sos/s per card.
With Core + 160, Memory + 170 i got 295-300 Sol/s per card.
If i up Core a bit more miner terminating with errors.

Many posts in this thread says to do like core -80 and memory + 1000 but when i configure like it my system lagging hard and miner not working at all.
Is this advices only for ETH mining or i misunderstooding something?
(also i don't understand how to overlock cards, is overlocking -> upgrading card voltage?)

Check this website, I've collected many OC settings for different card.

krypto-mining.blogspot.co.uk
sr. member
Activity: 504
Merit: 251
★777Coin.com★ Fun BTC Casino!
September 28, 2017, 03:39:46 AM
I ended up buying a couple of gigabyte gtx 1060 windforce oc 3gb cards will post the hashrates and oc them and see what I get. I know the 3gb won't be as future proof for ethereum but was thinking there other coins to try.
member
Activity: 69
Merit: 10
September 27, 2017, 04:09:43 PM
Hi gyus,
Can i have some advices please?
I have rig with 8 x 1060 msi gtx gaming 1060 and mining Zec on it
Without msi afterburner i got around 275 Sos/s per card.
With Core + 160, Memory + 170 i got 295-300 Sol/s per card.
If i up Core a bit more miner terminating with errors.

Many posts in this thread says to do like core -80 and memory + 1000 but when i configure like it my system lagging hard and miner not working at all.
Is this advices only for ETH mining or i misunderstooding something?
(also i don't understand how to overlock cards, is overlocking -> upgrading card voltage?)
Pages:
Jump to: