Author

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 529. (Read 703485 times)

legendary
Activity: 3346
Merit: 1094
Another little bug, AM doesn't show more than 8 gpu temperature in the status column even if I have 12 gpus in the summary and I can see all gpu temperature in there.

Yet another one, the miner view always goes back to Compact List after closing/reopening AM instead of staying to List as set, Very annoying.
1) This is a hard coded limit in Awesome Miner to only display the temperature first 8 devices. Some ASIC's can have a very large number of devices, and showing temperature for 20-40 devices  wouldn't look too nice.

I could bump it to 12 at least.

You can also configure Awesome Miner to display the highest temperature instead of all of them (in General section of Options dialog).

2) If you have Performance Mode enabled, Awesome Miner will force you to use Compact List for performance reasons. Do you have Performance Mode enabled, and if that case, how many miners do you have?


Yes I have performance mode enabled, not enough to keep it enabled. Thanks a lot, this makes my day you have no idea !

Is ethminer supported by AM ? There's a nvidia optimized version that I would like to use with AM.
Ethminer is not supported. You can still add as a Generic Miner to be able to launch it from Awesome Miner:
http://www.awesomeminer.com/help/genericminer.aspx

In the past this miner didn't have an API, so there was no way for Awesome Miner to get any mining information from it. Now I see that they very recently added and API, making it possible to support it in future versions of Awesome Miner.

They also state that the API is "Claymore Compatible". Could you try to use an External Miner, specifying software as Claymore, and see if you can get it running already today?
newbie
Activity: 35
Merit: 0
This program needs to be streamline.

There's way too much going on. I need a button that benchmarks all allow with all programs and chooses the fastest for me.  Then I specify my pool addresses for the top.
newbie
Activity: 37
Merit: 0
Awesome Miner is really wonderful and best for profitability switching. Thanks Patrike for the wonderful and best miner management software...
newbie
Activity: 40
Merit: 0
Somehow I don't know how to make Awesome Miner mine with my CPU. I managed to run a GPU miner and I assume that for CPU I should make new one. I am using Nicehash pool. Please advise how to add CPU mining. Either way Awesome miner seems to be perfect Win GUI.
member
Activity: 137
Merit: 10
Hi all,
is there some way to shutdown pc?
can i set some variable in option->pools->worker name? in a normal script i write %COMPUTERNAME% and my miner start with a computer name.
ty
legendary
Activity: 1036
Merit: 1000
Is it just me or the Dashboard showing $0 Revenue for any other currency apart from USD or BTC.

If you change it to AUD, CAD etc its not working.
newbie
Activity: 35
Merit: 0
CPU mining gives me an error. Here is the output
Code:
Starting Diagnostics
Starting Mining Software
Setting up Miner Engine. Instance: 2
Engine Type: CpuMinerOpt, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\base\AppData\Roaming\AwesomeMinerService\cpuminer-opt_2\cpuminer-opt-3.4.6-windows\cpuminer-core-avx2.exe
C:\Users\base\AppData\Roaming\AwesomeMinerService\cpuminer-opt_2\cpuminer-opt-3.4.6-windows\cpuminer-core-avx2.exe  -a cryptonight -o stratum+tcp://cryptonight.usa.nicehash.com:3355 -u 3Q59m5k9WTy7RevxVJBV8n4xowjgLNk4DT -p x --api-remote -b 0.0.0.0:4029   (WindowMode: ConsoleFormat, EngineType: CpuMinerOpt)
Configuration:

>
>          **********  cpuminer-opt 3.4.6  ***********
>      A CPU miner with multi algo support and optimized for CPUs
>      with AES_NI and AVX extensions.
>      BTC donation address: 12tdvfF7KmAsihBXQXynT6E6th2c2pByTT
>      Forked from TPruvot's cpuminer-multi with credits
>      to Lucas Jones, elmad, palmd, djm34, pooler, ig0tik3d,
>      Wolf0, Jeff Garzik and Optiminer.
>
> CPU:        Intel(R) Core(TM) i7-4930K CPU @ 3.40GHz
> CPU features: SSE2 AES AVX
> SW built on Sep  6 2016 with GCC 4.8.3
> SW features: SSE2 AES AVX AVX2
> Algo features: SSE2 AES
> Start mining with SSE2 AES
>
> [2017-10-17 20:24:22] 12 miner threads started, using 'cryptonight' algorithm.
> [2017-10-17 20:24:22] Starting Stratum on stratum+tcp://cryptonight.usa.nicehash.com:3355
Failed to start miner process: Process has exited, so the requested information is not available.
Failed to start miner in Diagnostics mode
Diagnostics completed

Second problem. The program stopped sending my GTX 980 to x15. But now it is sending it to SGMINER. In the profit profile, sgminer is not checked. Thank you.

Edit: I tried creating new profit profile for the GPU and I got it working by selecting only single program. I think your program would be awesome (lol) if, when benchmarking, it looked for the best hash rate of all programs. That way, you wouldn't even need to specify what program you want to use.
newbie
Activity: 35
Merit: 0
Also, the managed profit miner profit switching keeps sending my gtx 980 to x15 on nicehash (0.09$/month)

I have a profile for my card, the default NH zpool and mining hub with benchmarks. If I deactivate the x15 algo in the profile it still does x15. Also switched to the unbenchmarked default nvidia GPU profile and it still tries x15.
If you right click on the miner and select View Detail, and look at the Profit tab, I assume this list with profit per pool looks fine - it's just that Awesome Miner for some reason isn't able to pick the top pool and start mining on that one?

Yes! Everything makes sense, other than the SHA-3. The others (neoscrypt) could be high only momentarily. https://i.imgur.com/48ml9LM.png
member
Activity: 83
Merit: 10
Another little bug, AM doesn't show more than 8 gpu temperature in the status column even if I have 12 gpus in the summary and I can see all gpu temperature in there.

Yet another one, the miner view always goes back to Compact List after closing/reopening AM instead of staying to List as set, Very annoying.
1) This is a hard coded limit in Awesome Miner to only display the temperature first 8 devices. Some ASIC's can have a very large number of devices, and showing temperature for 20-40 devices  wouldn't look too nice.

Yes please, to 19 GPU would be awesome as the new Asus MOBO supports up to 19GPUs.
member
Activity: 83
Merit: 10
Another little bug, AM doesn't show more than 8 gpu temperature in the status column even if I have 12 gpus in the summary and I can see all gpu temperature in there.

Yet another one, the miner view always goes back to Compact List after closing/reopening AM instead of staying to List as set, Very annoying.
1) This is a hard coded limit in Awesome Miner to only display the temperature first 8 devices. Some ASIC's can have a very large number of devices, and showing temperature for 20-40 devices  wouldn't look too nice.

I could bump it to 12 at least.

You can also configure Awesome Miner to display the highest temperature instead of all of them (in General section of Options dialog).

2) If you have Performance Mode enabled, Awesome Miner will force you to use Compact List for performance reasons. Do you have Performance Mode enabled, and if that case, how many miners do you have?


Yes I have performance mode enabled, not enough to keep it enabled. Thanks a lot, this makes my day you have no idea !

Is ethminer supported by AM ? There's a nvidia optimized version that I would like to use with AM.
legendary
Activity: 3346
Merit: 1094
Can you confirm, the Change Frequency for Antminer doesn't work with S9 ?

Set and schedule frequency changes for Antminer (frequency change not available on
S9 batch 16 or later running bmminer 2.0).



No ideas to change on last batch ? Do you know why it's lock now ?

Back in 2016 this feature worked well with Antminer S9, but not for the batches released in 2017. Bitmain changed the firmware where the frequency of the Antminers no longer could be specified in the configuration file - instead the miners do some ritual during startup where this is defined. Because of this, there is no way to change the frequency of an Antminer via SSH. (If someone figures it out, please let me know).
legendary
Activity: 3346
Merit: 1094
Also, the managed profit miner profit switching keeps sending my gtx 980 to x15 on nicehash (0.09$/month)

I have a profile for my card, the default NH zpool and mining hub with benchmarks. If I deactivate the x15 algo in the profile it still does x15. Also switched to the unbenchmarked default nvidia GPU profile and it still tries x15.
If you right click on the miner and select View Detail, and look at the Profit tab, I assume this list with profit per pool looks fine - it's just that Awesome Miner for some reason isn't able to pick the top pool and start mining on that one?
legendary
Activity: 3346
Merit: 1094
cant use the cloud services for more than 12 Hours now cause it says its expired.....
How can it expire when it auto renews?
Also wrote an mail to support no answer yet.
I've just answered one e-mail about this topic that was sent about 5h ago - maybe that one was yours? Previously the Cloud Services only allowed up to one extra day when a subscription expires. What I think happend here is that it was some delay in the renewal. For the future I've changed the implementation to allow use of Cloud Services for an entire week after it expires, to give more time for any auto renewal payment to be processed.
newbie
Activity: 9
Merit: 0
cant use the cloud services for more than 12 Hours now cause it says its expired.....
How can it expire when it auto renews?
Also wrote an mail to support no answer yet.
newbie
Activity: 37
Merit: 0
Xmr stak for both nvidia and amd yes!
newbie
Activity: 1
Merit: 0
It looks like XMR-Stak might have an API (the kind of monitoring interface Awesome Miner uses to connect to the mining software to get information about hashrate and similar), but no documentation about it so I'm not sure what it can do. It's some effort to add support for new mining software, so it this one is getting popular, I will add it.

Hi, I would also like to vote for XMR-Stak support, we currently use its HTML reports https://github.com/fireice-uk/xmr-stak-amd

Thank you for considering!
Roman (Awesome Miner Premium user)
full member
Activity: 162
Merit: 100
Can you confirm, the Change Frequency for Antminer doesn't work with S9 ?

Set and schedule frequency changes for Antminer (frequency change not available on
S9 batch 16 or later running bmminer 2.0).



No ideas to change on last batch ? Do you know why it's lock now ?
newbie
Activity: 35
Merit: 0
For those using prohashing.

Awesome miner cannot recognize that different miners (and algos) can direct to the same pool URL. I found a workaround to this.

1. Don't give API access;
2. Don't add prohashing as a pool.

You can add secondary pools but not prohashing. Also, do not define coin. The program will associate that coin to all hardware directed at that URL. Ie: I set it to dash for my x11 miners and it shows the same dash profit calculation for my scrypt miners. So my 500mh/s L3+ are registering as awful x11 miners.

Maybe a coin override per miner feature would fix this.

Still haven't fixed my gpus going to x15
newbie
Activity: 35
Merit: 0
Also, the managed profit miner profit switching keeps sending my gtx 980 to x15 on nicehash (0.09$/month)

I have a profile for my card, the default NH zpool and mining hub with benchmarks. If I deactivate the x15 algo in the profile it still does x15. Also switched to the unbenchmarked default nvidia GPU profile and it still tries x15.
newbie
Activity: 35
Merit: 0
Hi,

I would love for you to add prohashing.com support. It is similar to zpool in that you choose your payout coin. Thank you.
Jump to: