Pages:
Author

Topic: Claymore XPM GPU Miner discussion - page 64. (Read 142123 times)

legendary
Activity: 1400
Merit: 1050
April 06, 2014, 03:01:28 PM
#78
what commands to disperse gpu?
"take the hammer and hit the gpu !"
That command to someone might disperse well your gpu
full member
Activity: 140
Merit: 100
April 06, 2014, 02:34:43 PM
#77
what commands to disperse gpu?
member
Activity: 93
Merit: 250
April 06, 2014, 02:34:12 PM
#76
Thanks, I will overclock my cpu

Hey, does overclocking the cpu give better results, currently running 4x290x with i7 4770k with 75-85% cpu utilization, and lastly would running the system ram at faster speed give any improvements? Thanks

CPU load must be <=80% for best performance, so you can try to overclock CPU and see if it helps. Overclocking RAM is almost useless.
donator
Activity: 1610
Merit: 1325
Miners developer
April 06, 2014, 02:31:56 PM
#75
Hey, does overclocking the cpu give better results, currently running 4x290x with i7 4770k with 75-85% cpu utilization, and lastly would running the system ram at faster speed give any improvements? Thanks

CPU load must be <=80% for best performance, so you can try to overclock CPU and see if it helps. Overclocking RAM is almost useless.
hero member
Activity: 518
Merit: 500
April 06, 2014, 02:25:15 PM
#74
This no work with 7xxx series?

It works for the HD7xxx series, but ideally for 290/290x. Worked for my HD7970.
member
Activity: 93
Merit: 250
April 06, 2014, 02:23:09 PM
#73
Hey, does overclocking the cpu give better results, currently running 4x290x with i7 4770k with 75-85% cpu utilization, and lastly would running the system ram at faster speed give any improvements? Thanks
member
Activity: 84
Merit: 10
PM for journalist,typing,and data entry services.
April 06, 2014, 01:57:42 PM
#72
This no work with 7xxx series?
full member
Activity: 140
Merit: 100
April 06, 2014, 01:54:53 PM
#71
it is possible an example of a bat file for 280х

my 2x 280x -
 ch/h: [  44677]
 ch/h: [  41863]

and make that all cards were started from 1 bat file

sr. member
Activity: 364
Merit: 250
April 06, 2014, 01:49:02 PM
#70
Tried this, but I gotta say that the CPU is a huge limiting factor here. My R9 290 are getting 57k each probably because I got a Pentium G2030 powering my rig (had to use -ss 2).

I am running v1.4 and I saw an exact 10% increase from v1.3 (52k before).

I still don't know if it's profitable, haven't mined for 24h yet.
sr. member
Activity: 378
Merit: 250
April 06, 2014, 01:41:06 PM
#69
Tried 5 different bat files for a 5 card 280x rig and once I started the 3rd bat file the system became unresponsive and eventually locked up.  Showes as mined .000086 XPM after about 1 hour.

Anyone get a 5 card 280x rig stable with the Claymore GPU miner?  Just wondering what I need to change.  Running stock with no overclocks.
sr. member
Activity: 479
Merit: 250
April 06, 2014, 12:28:51 PM
#68
v1.4 released, mining speed is faster by 10% now.

This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each.

Edit: Getting total round time of 570-580, varies a little card by card, cards running stock clocks. Using I7 4770k.

i was getting that with 1.3 actually 90k but with higher clocks

So you will get 100k now.
its possible
donator
Activity: 1610
Merit: 1325
Miners developer
April 06, 2014, 12:07:14 PM
#67
v1.4 released, mining speed is faster by 10% now.

This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each.

Edit: Getting total round time of 570-580, varies a little card by card, cards running stock clocks. Using I7 4770k.

i was getting that with 1.3 actually 90k but with higher clocks

So you will get 100k now.
sr. member
Activity: 479
Merit: 250
April 06, 2014, 11:48:25 AM
#66
v1.4 released, mining speed is faster by 10% now.

This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each.

Edit: Getting total round time of 570-580, varies a little card by card, cards running stock clocks. Using I7 4770k.

i was getting that with 1.3 actually 90k but with higher clocks
donator
Activity: 1610
Merit: 1325
Miners developer
April 06, 2014, 11:47:32 AM
#65
v1.4 released, mining speed is faster by 10% now.

This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each.

Edit: Getting total round time of 570-580, varies a little card by card, cards running stock clocks. Using I7 4770k.

Yes, it is possible. For example, I get about 12-13% speedup on 290X. But it depends on hardware so I stated non-optimistic value Smiley
member
Activity: 85
Merit: 10
April 06, 2014, 11:45:11 AM
#64
readme.txt is very useful:

...
IMPORTANT NOTE ABOUT  XPM ON YPOOL

You cannot estimate your eranings until you run miner for at least 24 hours.
A lot of people start miner for 3-6 hours and then claim that they earn too small amounts.
Ypool calculates earnings based on last 160 blocks that were found by Ypool, so you need to wait
at least 5*160 blocks until you see real earnings, it is about 12 hours.
Another important thing is that Ypool gives you big share values only when you found 9ch or 10ch shares,
it takes several hours to find such shares, so to estimate your profit you need at least 24 hours of .

So the correct way to calculate earnings is: mine for 24 hours and then check your earning per block in pool statistics,
and multiplicate it by blocks that ypool finds per 24 hours. Or mine for 48 hours and then take earnings for last 24 hours.
...

Thank you for your reply!
hero member
Activity: 518
Merit: 500
April 06, 2014, 11:38:00 AM
#63
v1.4 released, mining speed is faster by 10% now.

This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each.

What time are you getting?
newbie
Activity: 26
Merit: 0
April 06, 2014, 11:35:51 AM
#62
v1.4 released, mining speed is faster by 10% now.

This information is not correct. I am seeing an increase of 16% in mining speed. My 290s now mine at 80k each.

Edit: Getting total round time of 570-580, varies a little card by card, cards running stock clocks. Using I7 4770k.
hero member
Activity: 518
Merit: 500
April 06, 2014, 11:35:00 AM
#61
readme.txt is very useful:

...
IMPORTANT NOTE ABOUT MINING XPM ON YPOOL

You cannot estimate your eranings until you run miner for at least 24 hours.
A lot of people start miner for 3-6 hours and then claim that they earn too small amounts.
Ypool calculates earnings based on last 160 blocks that were found by Ypool, so you need to wait
at least 5*160 blocks until you see real earnings, it is about 12 hours.
Another important thing is that Ypool gives you big share values only when you found 9ch or 10ch shares,
it takes several hours to find such shares, so to estimate your profit you need at least 24 hours of mining.

So the correct way to calculate earnings is: mine for 24 hours and then check your earning per block in pool statistics,
and multiplicate it by blocks that ypool finds per 24 hours. Or mine for 48 hours and then take earnings for last 24 hours.
...

I updated with a copy of the read me.

v1.4 can't be download.
donator
Activity: 1610
Merit: 1325
Miners developer
April 06, 2014, 11:25:19 AM
#60
readme.txt is very useful:

...
IMPORTANT NOTE ABOUT MINING XPM ON YPOOL

You cannot estimate your eranings until you run miner for at least 24 hours.
A lot of people start miner for 3-6 hours and then claim that they earn too small amounts.
Ypool calculates earnings based on last 160 blocks that were found by Ypool, so you need to wait
at least 5*160 blocks until you see real earnings, it is about 12 hours.
Another important thing is that Ypool gives you big share values only when you found 9ch or 10ch shares,
it takes several hours to find such shares, so to estimate your profit you need at least 24 hours of mining.

So the correct way to calculate earnings is: mine for 24 hours and then check your earning per block in pool statistics,
and multiplicate it by blocks that ypool finds per 24 hours. Or mine for 48 hours and then take earnings for last 24 hours.
...
member
Activity: 85
Merit: 10
April 06, 2014, 10:42:45 AM
#59
3X280x an hour at YPOOL dug up 0.06 XPM such as 1.44XPM a day income is  high!  is I set up a problem? Sad

You have to let it run at least 12 hours, because of how ypool payment system is different than most pools. 24 hours for a more accurate assessment of pay outs.

OK! I WILL BO IT
Pages:
Jump to: