Topic: ★★★ MaruCoin ★★★ NEW X13 ALGO ! ★★★ MINE NOW ! [KGW+DGW] ★★★ NO IPO/PM EXCHANGE! - page 38. (Read 96477 times)
April 19, 2014, 03:13:04 AM
April 19, 2014, 03:09:05 AM
I will update suprnova later this evening, waiting for a PM from the devs.
April 19, 2014, 02:33:27 AM
April 19, 2014, 02:32:49 AM
Which pool is alive?
April 19, 2014, 02:14:43 AM
I'm surprised nobody is trading yet, been watching both exchanges a while now. Trade at https://www.Atomic-Trade.com?refid=MT7XT2I3 btw, not sure how trustworthy europex is considering I never see trades on it aside from what I suspect is one person trading to themselves to make the appearance of inflated value on coins.
April 19, 2014, 02:12:07 AM
i compiled the GPU miner on linux
on solo it works fine, and also worked in suprnova until it went down
but can't connect to the p2pool 'Waiting for work to be available from pools.'
also wallet syncing doesn't work. even if i delete blockchain, peers.dat and adding altminer's nodes
on solo it works fine, and also worked in suprnova until it went down
but can't connect to the p2pool 'Waiting for work to be available from pools.'
also wallet syncing doesn't work. even if i delete blockchain, peers.dat and adding altminer's nodes
April 19, 2014, 12:41:26 AM
Everything is ok now, mining MARU with the 1st X13 coin.
April 18, 2014, 11:22:39 PM
Quote from: dbt1033
-Q 0
and
--scan-time 1
and
--expiry 1
No, that's just for p2pools mostly.
I use --scan-time 5 --expiry 20 for normal pools, but others use different settings
April 18, 2014, 11:07:21 PM
Quote from: dbt1033
-Q 0
and
--scan-time 1
and
--expiry 1
April 18, 2014, 11:06:17 PM
Add these nodes if you want to sync with my pools
Hi,rejects is too much in your pool.Any solution?Code:
addnode=maru.altmine.net
addnode=sg.altmine.net
addnode=us.altmine.net
Code:
./marucoind getblockhash 2047
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c
[P]ool management [G]PU management [*S]ettings [D]isplay options [Q]uit
GPU 0: 60.0C 2448RPM | 1.439M/1.437Mh/s | R: 34.9% HW:0 WU:0.027/m I:13
GPU 1: 70.0C 2256RPM | 1.436M/1.437Mh/s | R: 35.9% HW:0 WU:0.026/m I:13
GPU 2: 68.0C 2283RPM | 1.437M/1.437Mh/s | R: 32.4% HW:0 WU:0.028/m I:13
scantime & expiry = 1
Can I use these 3 settings to normal stratum pools?
I ment queue...
April 18, 2014, 10:40:52 PM
Add these nodes if you want to sync with my pools
Hi,rejects is too much in your pool.Any solution?Code:
addnode=maru.altmine.net
addnode=sg.altmine.net
addnode=us.altmine.net
Code:
./marucoind getblockhash 2047
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c
[P]ool management [G]PU management [*S]ettings [D]isplay options [Q]uit
GPU 0: 60.0C 2448RPM | 1.439M/1.437Mh/s | R: 34.9% HW:0 WU:0.027/m I:13
GPU 1: 70.0C 2256RPM | 1.436M/1.437Mh/s | R: 35.9% HW:0 WU:0.026/m I:13
GPU 2: 68.0C 2283RPM | 1.437M/1.437Mh/s | R: 32.4% HW:0 WU:0.028/m I:13
scantime & expiry = 1
Can I use these 3 settings to normal stratum pools?
-Q 0
and
--scan-time 1
and
--expiry 1
April 18, 2014, 10:31:00 PM
Add these nodes if you want to sync with my pools
Hi,rejects is too much in your pool.Any solution?Code:
addnode=maru.altmine.net
addnode=sg.altmine.net
addnode=us.altmine.net
Code:
./marucoind getblockhash 2047
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c
[P]ool management [G]PU management [*S]ettings [D]isplay options [Q]uit
GPU 0: 60.0C 2448RPM | 1.439M/1.437Mh/s | R: 34.9% HW:0 WU:0.027/m I:13
GPU 1: 70.0C 2256RPM | 1.436M/1.437Mh/s | R: 35.9% HW:0 WU:0.026/m I:13
GPU 2: 68.0C 2283RPM | 1.437M/1.437Mh/s | R: 32.4% HW:0 WU:0.028/m I:13
scantime & expiry = 1
Can I use these 3 settings to normal stratum pools?
April 18, 2014, 10:18:03 PM
wallet stuck on block 2000, deleted everything except conf and wallet dat and added nodes..
EDIT: just synced, took a while
EDIT: just synced, took a while
April 18, 2014, 10:10:29 PM
dstorm,
is there any way the miner diff would be a little lower
accepted shares coming in very slowly (1 every 30/60 seconds)
at the supernova pool the miner diff was 0.008 / 0.010 now it is 0.022 /0.030
that 1 reject after 10 shares gave me a 10% reject :-D
is there any way the miner diff would be a little lower
accepted shares coming in very slowly (1 every 30/60 seconds)
at the supernova pool the miner diff was 0.008 / 0.010 now it is 0.022 /0.030
that 1 reject after 10 shares gave me a 10% reject :-D
April 18, 2014, 09:58:58 PM
Add these nodes if you want to sync with my pools
Hi,rejects is too much in your pool.Any solution?Code:
addnode=maru.altmine.net
addnode=sg.altmine.net
addnode=us.altmine.net
Code:
./marucoind getblockhash 2047
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c
[P]ool management [G]PU management [*S]ettings [D]isplay options [Q]uit
GPU 0: 60.0C 2448RPM | 1.439M/1.437Mh/s | R: 34.9% HW:0 WU:0.027/m I:13
GPU 1: 70.0C 2256RPM | 1.436M/1.437Mh/s | R: 35.9% HW:0 WU:0.026/m I:13
GPU 2: 68.0C 2283RPM | 1.437M/1.437Mh/s | R: 32.4% HW:0 WU:0.028/m I:13
scantime & expiry = 1
April 18, 2014, 09:54:52 PM
Add these nodes if you want to sync with my pools
Hi,rejects is too much in your pool.Any solution?Code:
addnode=maru.altmine.net
addnode=sg.altmine.net
addnode=us.altmine.net
Code:
./marucoind getblockhash 2047
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c
[P]ool management [G]PU management
GPU 0: 60.0C 2448RPM | 1.439M/1.437Mh/s | R: 34.9% HW:0 WU:0.027/m I:13
GPU 1: 70.0C 2256RPM | 1.436M/1.437Mh/s | R: 35.9% HW:0 WU:0.026/m I:13
GPU 2: 68.0C 2283RPM | 1.437M/1.437Mh/s | R: 32.4% HW:0 WU:0.028/m I:13
April 18, 2014, 09:54:34 PM
The wallet works. Just go to the console of your qt client and add the nodes.
Over 3,000 Maru traded so far at atomic-trade.com!
Over 3,000 Maru traded so far at atomic-trade.com!
It's not work
April 18, 2014, 09:52:12 PM
Windows wallet - It works just fine and syncs.
Delete all but your config na wallet.dat file, run client.
04:51:20
getblockhash 2047
04:51:20
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c
Same hash on my linux.
Delete all but your config na wallet.dat file, run client.
04:51:20
getblockhash 2047
04:51:20
0000000035cbe5efabdb67725cb3e975ae4a28abb58cdbbdfef610a05413c01c
Same hash on my linux.
April 18, 2014, 09:49:05 PM
mine wouldn't sync also
I've added the nodes, nothing
I've deleted the old blockchain (excl wallet)
SYNCED
I've added the nodes, nothing
I've deleted the old blockchain (excl wallet)
SYNCED
April 18, 2014, 09:38:45 PM
The wallet works. Just go to the console of your qt client and add the nodes.
Over 3,000 Maru traded so far at atomic-trade.com!
Over 3,000 Maru traded so far at atomic-trade.com!
Jump to: