Topic: Megaminer 6.3 - Multi pool / Multi Algo launcher - page 50. (Read 70970 times)

Please, write correct line for autostart MM for 3 pools: MiningPoolHub,Zpoool, Hashrefinery, any (all) coins,  in this topic, i will try place it to *.bat file and check it

Question - Coinsname -is this parameter needed?
Because when i try start.bat i choose only mode and pools, and all working fine.
And line
del "Stats\*_Profit.txt" is necessary if all tests are completed?
So if i place this line in autostart.bat file, MM will starts new tests or not?
Tnx
UPD: tested ws -coinsname,without -coinsname, del "Stats\*_Profit.txt" present. No changes... "No pools...retry in 10 sec" message shown

UPD2: tested for any changed names of pools - result is the same "No pools...retry in 10 sec" message shown

Zpool and Yiimp Api are unstable, I can´t do something....

Same problem here...
"
Yiimp api not responding...aborting
"
Everything else works fine

Clean install and I tried batch Galletera post, no errors

:LOOP
del "Stats\*_Profit.txt"

powershell -version 5.0 -noexit -executionpolicy bypass -command "&.\core.ps1 -MiningMode AUTOMATIC -PoolsName Mining_Pool_Hub,Suprnova -Coinsname Feathercoin,Groestlcoin,Zcash,Zclassic,Ethereum,Ubiq,Hush,DIGIBYTE-GROESTL,Vertcoin,Expanse
GOTO LOOP

 
Two people reported that your example not working (see earlier messages in this topic from me ang Galletera user)!
"No pools" message shown, no another result
Please, write correct line for autostart MM , 3 pools MiningPoolHub,Zpoool, Hashrefinery,  in this topic, i will try place it to *.bat file and check it

You can autostart via bat file, see examples.

Wow!
Now works perfectly!
Critical for me autostart via *.bat file, because sometimes electricity is off, no possible put data manually after electricity is on.
Waiting for new release!

Thanks

Download new zpool.json from github

X11, Quark and Qubit has problem on Zpool,
gives wrong rate and values.

Solved, can try core.ps1 from Github. I will make a new release when various fixes are done.


Dollar is shown when location is set to US.

The same bug!
Looks like MM tried to connect to no existing pools or wrong ports

Trying to make it work automatically with MPH + Suprnova and only mining certain coins. Info looks right?


Getting a "No Pools!" error.

Okay, for example:

Multipoolminer before zpool api fault

Miner              Algorithm           Speed   BTC/Day    BTC/GH/Day Pool
-----                ---------           ----- -------  ---------- ----
CcminerSp        Skein           1,83 GH/s  0,00276     0,00151      MiningPoolHub-DigibyteSkein
CcminerAleksis  Skein           1,70 GH/s  0,00255     0,00151      MiningPoolHub-DigibyteSkein
CcminerKlaust   Groestl       132,88 MH/s 0,00230    0,01728      MiningPoolHub-Groestlcoin
CcminerTpruvot Tribus        150,18 MH/s 0,00197    0,01314      Zpool-
CcminerAleksis  Blakecoin      16,87 GH/s 0,00178   0,00011      Zpool-
CcminerAleksis  Blake2s        13,64 GH/s 0,00166    0,00012      Zpool-

Multipoolminer under zpool api fault

Miner              Algorithm           Speed BTC/Day     BTC/GH/Day    Pool
-----                 ---------           ----- -------           ----------        ----
EWBF2             Equihash        1,40 KH/s 0,00155   110,52305   MiningPoolHub-Zclassic
EWBF0             Equihash        1,36 KH/s 0,00151   110,52305   MiningPoolHub-Zclassic
EWBF1             Equihash        1,33 KH/s 0,00148   110,52305   MiningPoolHub-Zclassic
CcminerTpruvot Lyra2z           5,65 MH/s 0,00146     0,25878     MiningPoolHub-Zcoin
CcminerAleksis Lyra2RE2        131,82 MH/s 0,00123  0,00932    MiningPoolHub-Vertcoin
CcminerLyra2z  Lyra2z            4,66 MH/s 0,00121     0,25878    MiningPoolHub-Zcoin

As we can see, no Zpool in table, the same as MM.

And after Zpool api commands restored, MPM.
When next check of profitability!
API restored- we can see zpool algos and pools immediately

Miner               Algorithm           Speed BTC/Day  BTC/GH/Day     Pool
-----                 ---------           ----- -------  ----------                  ----
CcminerAleksis   X17                34,41 MH/s 0,00433     0,12599   Zpool-
CcminerSp         X17                29,10 MH/s 0,00367     0,12599   Zpool-
CcminerAleksis   Nist5             155,52 MH/s 0,00321     0,02066  Zpool-
CcminerTpruvot hmq1725        14,18 MH/s 0,00224     0,15783   Zpool-
EWBF2              Equihash        1,40 KH/s 0,00155 1 110,52305   MiningPoolHub-Zclassic
CcminerAleksis  Sib                 42,01 MH/s 0,00151     0,03601   Zpool-
EWBF0              Equihash        1,36 KH/s 0,00151 1 110,52305   MiningPoolHub-Zclassic
EWBF1              Equihash        1,33 KH/s 0,00148 1 110,52305   MiningPoolHub-Zclassic


And MM before Zpool API fault.

Algorithm                Coin                Miner                  Speed            BTC/Day EUR/Day Pool      PoolWorkers
---------                   ----                  -----                  -----              ------- ------- ----               -----------
SKEIN                   digibyte         ccminerAlexis78      1,73 GH/s      0,00249    8,78      MPH
MYRIAD-GROESTL  digibyte         ccminerAlexis78      214,17 MH/s  0,00225    7,92      MPH
TRIBUS                                     CcminerTpruvot       141,73 MH/s  0,00212    7,47      ZPOOL     5
LYRA2V2                                   cminerAlexis78        126,85 MH/s   0,00202    7,10      ZPOOL     276
SKUNK                                     CcminerTpruvot       100,19 MH/s   0,00195    6,87      ZPOOL     129
X17                                          ccminerAlexis78      34,96 MH/s     0,00195    6,85      ZPOOL     19

And MM after Zpool API fault continuous time....

Algorithm      Coin             Miner                Speed                BTC/Day EUR/Day Pool    PoolWorkers
---------      ----                 -----                -----                ------- ------- ----    -----------
NIST5                           ccminerAlexis78      150,45 MH/s     0,00276   10,21  H.RFRY           21
GROESTL    groestlcoin   CcminerKlaust        120,09 MH/s     0,00217    8,04   MPH
SKEIN        digibyte       ccminerAlexis78      1,73 GH/s         0,00215    7,97   MPH
EQUIHASH zcash            EWBF                     1,29 KH/s        0,00158    5,83   MPH
LYRA2V2                        ccminerAlexis78      125,45 MH/s    0,00146    5,39   H.RFRY           24
LYRA2Z      zcoin            CcminerTpruvot       5,55 MH/s        0,00140    5,18   MPH

No Zpool in table and no refreshing for continuous time!
And we can not see profitability of Zpool algos!
I need check this information for polls statistic and i must compare it!
So, please, can you move back zpool statistic after Zpool API is being restored?

And how i can change day profitability currency when i want to see it in dollars ?

The prices with the latest file looks perfect

I'm not sure it is a bug, expected behavior for no pool api response is:

If you are using only that pool, and no response in first execution -- infinite retries

If you are using only that pool, and no response in other execution, continue mining actual coin, hide profit table for outdated info an wait next interval to check again.

If you are using more pools, pool not responding is ignored and execution continues with other pools info, at next interval check again.

I could hide error message, dont hide profit data and simulate nothing happens, but i think this was unclear.

Until now, I dont see api error message and try api manually and its working.

This page, but not 100% sure its also for the api pages, maybe crackfoo could advise

The same bug that in 3.1 -no zpool after zpool api fault

Reporting more good news on AMD

MPH has been on Eth for a while now and just changed to Eth-Classic

Within a minute your script picked that up and my Ethash miner smoothly moved from Eth to Eth classic.

I know this is the intended operation but is cool to actually watch it work.

Thanks...

Thanks!
Gatelessgate handles equihash on AMD

{
"Path" : ".\\Bin\\GatelessGate\\GatelessGate.exe",
"Uri" : "https://github.com/zawawawa/gatelessgate/releases/download/v0.1.3-pre6b/gatelessgate-0.1.3-pre6b-win64.zip",
"Types" : ["AMD"],
"Arguments" : "--api-port 4028 --api-listen -o #PROTOCOL#://#SERVER#:#PORT# -u #LOGIN# -p #PASSWORD# --gpu-platform #GPUPLATFORM#",
"API" : "Xgminer",
"APIPort" : 4028,
"Wrap" : false,
"Dualmining":false,
"Algorithms": [
            {"neoscrypt":"-k neoscrypt --gpu-threads 1 --worksize 256"},
            {"ethash":"-k ethash-new --gpu-threads 2 --worksize 192"},
            {"cryptonight":"-k cryptonight --gpu-threads 1 --worksize 4"},
            {"equihash":"-k equihash --gpu-threads 2 --worksize 256"},
            {"pascal":"-k pascal --gpu-threads 2 --worksize 256"}
    ]
}