bad experience at pangolinminers ... 6 weeks delay
i want get some more miners in china, i know a fairly good place for mining ...
i dont know where i can buy
Topic: MicroBT announced M30s - page 2. (Read 906 times)
And my M20 arrived DEAD and cost 560 bucks to return...4 months after payment.
l would not be buying from them at this time. as pangolin or whatsminer / microbt did wrong.
way too many units were too slow to show.
way too many units were too slow to show.
I mean do what I did. You can flip your m20s upside down and you can actually cook your breakfast on it... I cooked 2 eggs and scrambled them on my M20s. You need to think big picture it's an amazing hot plate that ALSO mines crypto.
My m20's finally are running and doing well. The company itself is what went down south this year. They dropped the ball hard. I won't be buying whatsminer next year unless in stock ships same week. Never doing a preorder with them again after this drama.
Makes a lot of sense, the last time I had to buy a Whatsminer M21s I had to get it from a resellers in China to avoid the misery, I think I paid an extra 100$ compared to buying it directly from Whatsminer but i heard about the delays and stuff so I took a safer route, non of the Chinese resellers I know of complained about not receiving their gears on time, seems like Whatsminer put those guys on top of their list and screw the rest of the world
Having said that I do think that they will get their shit together this time if they do want to stay in the market and not lose any more clients , anyway so far they haven't announced any release data or price, if they can bet bitmain's prices I might be willing to take the risk of getting an M30s just to review it.
LOL they can barely deliver their m20 and m20s's on time. Idiots. I'm sure it will be a idiotic (PREORDER NOW, 8 MONTHS DELIVERY) and you will get it 2 months late. By that time bitmain will have 20J miner out and lower price. Yea, screw whats miner. My m20's are finally arriving tomorrow...that I ordered in July.
l would not be buying from them at this time. as pangolin or whatsminer / microbt did wrong.
way too many units were too slow to show.
LOL they can barely deliver their m20 and m20s's on time. Idiots. I'm sure it will be a idiotic (PREORDER NOW, 8 MONTHS DELIVERY) and you will get it 2 months late. By that time bitmain will have 20J miner out and lower price. Yea, screw whats miner. My m20's are finally arriving tomorrow...that I ordered in July.
I run 2 m20s
I run 1 m21s
I use this cable
https://www.ebay.com/itm/L6-30P-C19-Molded-Power-Cord-10ft-220V-250V-30A-Ships-Free-/202821644944
12 gauge
my volts are about 225
so 16 x 225 = 3600 watts this is very close margin of error.
all three units get a lot of air.
they are all near 3 3000 cfm fans
I would be afraid to run 20 or 30 of these units
this is before we added these fans the three big miners are not in place yet but would be on the left of this rack
My fear is 20 or 30 units will be risky.
I would not mind one or two of them.
I run 1 m21s
I use this cable
https://www.ebay.com/itm/L6-30P-C19-Molded-Power-Cord-10ft-220V-250V-30A-Ships-Free-/202821644944
12 gauge
my volts are about 225
so 16 x 225 = 3600 watts this is very close margin of error.
all three units get a lot of air.
they are all near 3 3000 cfm fans
I would be afraid to run 20 or 30 of these units
this is before we added these fans the three big miners are not in place yet but would be on the left of this rack
My fear is 20 or 30 units will be risky.
I would not mind one or two of them.
video shows 3359 watts an 88500 hash pretty impressive.
But I am not a fan of one cable for 3350 watts
But I am not a fan of one cable for 3350 watts
Just went back and saw that and was about to edit my post but you beat me to it. Yeah, still a lot of power for a single cable. Pretty much requires you to go 240V. 208V is over 16A , right near the limit of the C19.
Although I did see a m20s running when I visited my host a few weeks back. I felt the power cable and it wasn't warm. I think they are running 240 though and the power cord looked really beefy.
video shows 3359 watts an 88500 hash pretty impressive.
But I am not a fan of one cable for 3350 watts
But I am not a fan of one cable for 3350 watts
Interesting. But the way it's worded in the tweet it sounds like the 88T may be at a full speed and the 38 J/T may be at a low power mode.
If that is the case, then at full speed this thing could be pulling over 4kW! I can already smell the electrical fires.....
Quote
M30S can achieve power ratio as low as 38 J/T and hashrate as high as 88T!
If that is the case, then at full speed this thing could be pulling over 4kW! I can already smell the electrical fires.....
On their twitter, Whatsminer announced a new beast, the brand new M30s.
https://mobile.twitter.com/Whatsminer_MBT/status/1203038918389616640?s=20
Does 88th at 3344watts , price and shipping dates are unkown yet, but honestly 38j/t is quite a great achievement, i am more than happy seeing competition improvement as far as the mining industry is concerned, price will be the main thing to look for here ,so lets wait and see how this goes for whatsminer.
https://mobile.twitter.com/Whatsminer_MBT/status/1203038918389616640?s=20
Does 88th at 3344watts , price and shipping dates are unkown yet, but honestly 38j/t is quite a great achievement, i am more than happy seeing competition improvement as far as the mining industry is concerned, price will be the main thing to look for here ,so lets wait and see how this goes for whatsminer.
Jump to: