Pages:
Author

Topic: [MIL]* MillenniumCoin DAAE * TOR * Anon * Escrow "NEW GROUND FOR CRYPTO" - page 13. (Read 26309 times)

member
Activity: 397
Merit: 11
Dev.

I think I use the old client which is syncing for hours (yesterday it was synced). Try to reinstall but same old problem.

What to do?

I have the newest client but my client isnt syncing up since the coin has forked, says that the last block was found 6 hours ago.
Can anyone upload the new proper blockchain or something?
Give it a little time. We are waiting on the new clients to produce POS blocks. When this happens things will start moving again. The same thing happened when we moved to TOR wallets and was fine after a few days.

Now it works like a charm Smiley synced in seconds
legendary
Activity: 996
Merit: 1013
You may have noticed that we have a lot of PoW blocks with
zero reward.

This was intentional, as with the network this small
a pure PoS chain has a tendency to stall, so the PoW was reimplemented
for the sole reason of driving the chain forward and leaving the older wallets
behind.

This feature will - I think - be disabled in the next wallet update - soon.

All the delegate transactions so far should have been confirmed
by now.

I think it might be possible that I caused the fork since I threw some hash at the wallet

It's allright. A fork was to be expected. We're now sailing.

I'm abit confused about how the escrow works? How to determine the if criteria met?  Huh

Well you should see the transaction in the transaction list of your wallet.
hero member
Activity: 714
Merit: 500
I'm abit confused about how the escrow works? How to determine the if criteria met?  Huh
legendary
Activity: 2002
Merit: 1051
ICO? Not even once.
I think it might be possible that I caused the fork since I threw some hash at the wallet when I saw the wallet reported there's still a PoW difficulty. No block rewards other than 1 block with 0.01 coins followed by a bunch of empty but accepted blocks. I'm not sure why a PoS coin still accepts work though. I resynced it from ground zero with the bootstrap and now it's synced but whatever I tried I couldn't see even one delegate connected on the network in the last few days and I still only have a maximum of 2 nodes connected. The block explorer and the rich list looks surprisingly good but otherwise the coin at this stage I think is a mess and the new thread was kind of premature.
sr. member
Activity: 250
Merit: 250
New Explorer and Rich List. https://chainz.cryptoid.info/mil/ Currently still syncing but should be fully functional soon.

Is this wallet safe to install?

https://mega.co.nz/#!4kwTlKIa!3TtV2k8zWExgiw6E6BRXvHOqX6mS32O1NibaioIEPtE
Yes. This is the latest Windows Wallet.
sr. member
Activity: 450
Merit: 250
New Explorer and Rich List. https://chainz.cryptoid.info/mil/ Currently still syncing but should be fully functional soon.

Is this wallet safe to install?

https://mega.co.nz/#!4kwTlKIa!3TtV2k8zWExgiw6E6BRXvHOqX6mS32O1NibaioIEPtE
sr. member
Activity: 250
Merit: 250
New Explorer and Rich List. https://chainz.cryptoid.info/mil/ Currently still syncing but should be fully functional soon.
sr. member
Activity: 250
Merit: 250
Dev.

I think I use the old client which is syncing for hours (yesterday it was synced). Try to reinstall but same old problem.

What to do?

I have the newest client but my client isnt syncing up since the coin has forked, says that the last block was found 6 hours ago.
Can anyone upload the new proper blockchain or something?
Give it a little time. We are waiting on the new clients to produce POS blocks. When this happens things will start moving again. The same thing happened when we moved to TOR wallets and was fine after a few days.
member
Activity: 397
Merit: 11
Dev.

I think I use the old client which is syncing for hours (yesterday it was synced). Try to reinstall but same old problem.

What to do?

I have the newest client but my client isnt syncing up since the coin has forked, says that the last block was found 6 hours ago.
Can anyone upload the new proper blockchain or something?
sr. member
Activity: 450
Merit: 250
We have now forked.
The #official" fork starts from Block #344129 which contains several delegate transactions

http://explorer.millenniumcoin.pw/block/25f52a1ad7e47de4731a02c114820cba5f31a1560f2f9b0a8c2f5e7c5b17435f7

The chain has stalled for a while, I believe due to
coins in v.2 wallets acquiring age.

Is this coin working fully now? Delegates too? 
sr. member
Activity: 335
Merit: 250
Dev.

I think I use the old client which is syncing for hours (yesterday it was synced). Try to reinstall but same old problem.

What to do?
legendary
Activity: 996
Merit: 1013
We have now forked.
The #official" fork starts from Block #344129 which contains several delegate transactions

http://explorer.millenniumcoin.pw/block/25f52a1ad7e47de4731a02c114820cba5f31a1560f2f9b0a8c2f5e7c5b17435f7

The chain has stalled for a while, I believe due to
coins in v.2 wallets acquiring age.
member
Activity: 397
Merit: 11

Well, the wallet was running since yesterday and I tried it several times, restarted it and so on but it's the same. Transferred some coins into it and increased my advertised balance but that doesn't changed anything as far as I could tell. I think the tech (at least on paper) is great but it doesn't seem to work at the moment. Furthermore the coin needs more nodes, a block explorer with rich list and a fix regarding the wallet's unwarrented CPU usage which is constantly above 10% on a modern CPU even though it's fully synced.

Yes we are having trouble getting things working
smoothly at this early stage. Let's hope as many as possible
upgrades and set his wallet as a delegate.

The block explorer at millenniumcoin.pw
has been updated and I'm working on the rich list right now.

The advertised balance will not make any visible difference, but
you ought to see the number of coins in it when you type getinfo

The 10% percent hogging of CPU sounds worrying, and I'd like to
hear if anyone has been having the same thing?


I have had it running on 2-6% for a couple of minutes then it went down to 0.2-1.0% then back to the 2-6% range.

Although I can clearly say that Bitcoin QT eats up way more resources.


Also running listadvertisedbalances i can see multiple addresses with a total of more than 10k MIL
legendary
Activity: 996
Merit: 1013
To all:

Right now the network has a handful of v.2 nodes and
an equal handful of the old v.1 nodes. Majority of the coins
are in the old v.1 wallets, so all the blocks are produced by them.
And v1. wallets will reject delegate transactions. When I check the memory pool of
my wallet, I see it stuffed with delegate transactions waiting
to get confirmed.

As soon as a v2 wallet produces a PoS block that includes delegate transaction,
the network will fork and we need to monitor the block heights and if necessary, sync
with the two 24/7 servers we currently have. (they are
eo4nn4b4xo5apyjl.onion
and
fidikevyotzv22pz.onion
so if you haven't added them to the conf already, please do so)
legendary
Activity: 996
Merit: 1013

Well, the wallet was running since yesterday and I tried it several times, restarted it and so on but it's the same. Transferred some coins into it and increased my advertised balance but that doesn't changed anything as far as I could tell. I think the tech (at least on paper) is great but it doesn't seem to work at the moment. Furthermore the coin needs more nodes, a block explorer with rich list and a fix regarding the wallet's unwarrented CPU usage which is constantly above 10% on a modern CPU even though it's fully synced.

Yes we are having trouble getting things working
smoothly at this early stage. Let's hope as many as possible
upgrades and set his wallet as a delegate.

The block explorer at
http://explorer.millenniumcoin.pw/
has been updated and I'm working on the rich list right now.

The advertised balance will not make any visible difference, but
you ought to see the number of coins in it when you type getinfo

The 10% percent hogging of CPU sounds worrying, and I'd like to
hear if anyone has been having the same thing?
legendary
Activity: 2002
Merit: 1051
ICO? Not even once.

It doesn't return anything to me

listadvertisedbalances

[
]

And if I try to test the delegate sending feature it says it couldn't find any delegates.

It returns an empty set. That happens, especially when the network
have just a small numbers of delegates.
Having the wallet open for some time should eventually reveal some of them.

Well, the wallet was running since yesterday and I tried it several times, restarted it and so on but it's the same. Transferred some coins into it and increased my advertised balance but that doesn't changed anything as far as I could tell. I think the tech (at least on paper) is great but it doesn't seem to work at the moment. Furthermore the coin needs more nodes, a block explorer with rich list and a fix regarding the wallet's unwarrented CPU usage which is constantly above 10% on a modern CPU even though it's fully synced.
legendary
Activity: 996
Merit: 1013

It doesn't return anything to me

listadvertisedbalances

[
]

And if I try to test the delegate sending feature it says it couldn't find any delegates.

It returns an empty set. That happens, especially when the network
have just a small numbers of delegates.
Having the wallet open for some time should eventually reveal some of them.
legendary
Activity: 2002
Merit: 1051
ICO? Not even once.
How can I know if there are any delegates online?

Use console command showadvertisedbalances

That doesn't seem to work for me (Method not found (code -32601)).

ahh my bad.

listadvertisedbalances

It doesn't return anything to me


listadvertisedbalances

[
]

And if I try to test the delegate sending feature it says it couldn't find any delegates.
jr. member
Activity: 153
Merit: 1
I like this project. Please keep us informed dev.
legendary
Activity: 1722
Merit: 1217
yarkol are you a dev?
Pages:
Jump to: